diff -ur ../nitrogen-old/ABOUT-NLS ./ABOUT-NLS
--- ../nitrogen-old/ABOUT-NLS 2007-08-07 10:20:48.000000000 +1200
+++ ./ABOUT-NLS 2014-06-15 07:51:10.842698000 +1200
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. Installers may use special
+options at configuration time for changing the default behaviour. The
+command:
+
+ ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it. If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of June
+2010. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca
+ +--------------------------------------------------+
+ a2ps | [] [] |
+ aegis | |
+ ant-phone | |
+ anubis | |
+ aspell | [] [] |
+ bash | |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | |
+ bison-runtime | [] |
+ bluez-pin | [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] |
+ cryptsetup | |
+ dfarc | |
+ dialog | [] [] |
+ dico | |
+ diffutils | [] |
+ dink | |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ exif | |
+ fetchmail | [] |
+ findutils | [] |
+ flex | [] |
+ freedink | |
+ gas | |
+ gawk | [] [] |
+ gcal | [] |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gjay | |
+ gliv | [] |
+ glunarclock | [] [] |
+ gnubiff | |
+ gnucash | [] |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gold | |
+ gpe-aerial | |
+ gpe-beam | |
+ gpe-bluetooth | |
+ gpe-calendar | |
+ gpe-clock | [] |
+ gpe-conf | |
+ gpe-contacts | |
+ gpe-edit | |
+ gpe-filemanager | |
+ gpe-go | |
+ gpe-login | |
+ gpe-ownerinfo | [] |
+ gpe-package | |
+ gpe-sketchbook | |
+ gpe-su | [] |
+ gpe-taskmanager | [] |
+ gpe-timesheet | [] |
+ gpe-today | [] |
+ gpe-todo | |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | [] [] |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] [] [] |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] |
+ gutenprint | |
+ hello | [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | |
+ iso_639 | [] [] [] [] |
+ iso_639_3 | |
+ jwhois | |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] |
+ libc | [] [] |
+ libexif | () |
+ libextractor | |
+ libgnutls | |
+ libgpewidget | |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | [] |
+ libidn | |
+ lifelines | |
+ liferea | [] [] |
+ lilypond | |
+ linkdr | [] |
+ lordsawar | |
+ lprng | |
+ lynx | [] |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | |
+ man-db | |
+ man-db-manpages | |
+ minicom | |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | |
+ psmisc | |
+ pspp | [] |
+ pwdutils | |
+ radius | [] |
+ recode | [] [] |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | |
+ tar | [] |
+ texinfo | |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] |
+ +--------------------------------------------------+
+ af am an ar as ast az be be@latin bg bn_IN bs ca
+ 6 0 1 2 3 19 1 10 3 28 3 1 38
+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ +-------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] () |
+ anubis | [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] [] |
+ bfd | [] |
+ bibshelf | [] [] [] |
+ binutils | [] |
+ bison | [] [] |
+ bison-runtime | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] [] [] |
+ cflow | [] [] |
+ clisp | [] [] [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] [] [] |
+ cryptsetup | [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] |
+ dink | [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ exif | () [] [] |
+ fetchmail | [] [] () [] [] [] |
+ findutils | [] [] [] |
+ flex | [] [] |
+ freedink | [] [] [] |
+ gas | [] |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gip | [] [] [] [] |
+ gjay | [] |
+ gliv | [] [] [] |
+ glunarclock | [] [] |
+ gnubiff | () |
+ gnucash | [] () () () () |
+ gnuedu | [] [] |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] |
+ gpe-aerial | [] [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] [] [] |
+ gpe-edit | [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] () [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] |
+ grub | [] [] |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] () [] |
+ gtkam | [] [] () [] [] |
+ gtkorphan | [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] |
+ hello | [] [] [] [] |
+ help2man | [] |
+ hylafax | [] [] |
+ idutils | [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] [] [] [] () [] [] [] () |
+ iso_3166_2 | () |
+ iso_4217 | [] [] [] () [] [] |
+ iso_639 | [] [] [] [] () [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] [] [] [] |
+ latrine | [] () |
+ ld | [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] () |
+ libgphoto2_port | [] () [] |
+ libgsasl | |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ liferea | [] [] [] [] [] |
+ lilypond | [] [] [] |
+ linkdr | [] [] [] |
+ lordsawar | [] |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] [] [] [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] |
+ pies | |
+ popt | [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] |
+ pwdutils | [] |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rosegarden | () () () |
+ rpm | [] [] [] |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] |
+ sed | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | |
+ skencil | [] () [] |
+ solfege | [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ sysstat | [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] |
+ vice | () () |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] [] |
+ +-------------------------------------------------+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ 5 64 105 117 18 1 8 0 28 89 18 19 0
+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ +----------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] [] |
+ aspell | [] [] [] [] |
+ bash | [] [] [] [] |
+ bfd | [] [] [] |
+ bibshelf | [] [] [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] |
+ bison-runtime | [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] |
+ cflow | [] [] [] |
+ clisp | [] |
+ coreutils | [] [] [] [] [] |
+ cpio | [] [] [] [] |
+ cppi | [] [] |
+ cpplib | [] [] [] |
+ cryptsetup | [] [] [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ dink | [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] |
+ freedink | [] [] [] |
+ gas | [] [] |
+ gawk | [] [] [] [] () [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] [] [] |
+ gjay | [] |
+ gliv | [] () |
+ glunarclock | [] [] [] [] |
+ gnubiff | () [] () |
+ gnucash | () () () () () [] |
+ gnuedu | [] [] |
+ gnulib | [] [] [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] [] |
+ gpe-aerial | [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] [] [] |
+ gpe-calendar | [] [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] [] [] |
+ gpe-contacts | [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] [] |
+ gpe-go | [] [] [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] [] |
+ grub | [] [] [] [] |
+ gsasl | [] [] [] [] [] |
+ gss | [] [] [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] [] [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] [] |
+ hello | [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | () [] [] [] |
+ iso_4217 | [] () [] [] [] [] |
+ iso_639 | [] () [] [] [] [] [] [] [] |
+ iso_639_3 | () [] [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] [] [] [] |
+ keytouch-editor | [] [] [] [] [] |
+ keytouch-keyboa... | [] [] [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] [] () |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] [] |
+ libidn | [] [] [] [] |
+ lifelines | () |
+ liferea | [] [] [] [] |
+ lilypond | [] [] |
+ linkdr | [] [] [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] [] [] |
+ m4 | [] [] [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] [] |
+ man-db | [] [] |
+ man-db-manpages | [] |
+ minicom | [] [] [] [] [] |
+ mkisofs | [] [] [] [] |
+ myserver | |
+ nano | [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] [] |
+ pies | |
+ popt | [] [] [] [] [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | |
+ pwdutils | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () () () () |
+ rpm | [] [] |
+ rush | |
+ sarg | [] |
+ screem | [] [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] |
+ sp | [] () |
+ sysstat | [] [] [] [] [] |
+ tar | [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux-ng | [] [] [] [] [] [] |
+ vice | () () () |
+ vmm | [] |
+ vorbis-tools | [] |
+ wastesedge | () () |
+ wdiff | [] |
+ wget | [] [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] |
+ +----------------------------------------------------+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ +-----------------------------------------------+
+ a2ps | [] |
+ aegis | |
+ ant-phone | |
+ anubis | [] [] |
+ aspell | [] |
+ bash | |
+ bfd | |
+ bibshelf | [] [] |
+ binutils | |
+ bison | [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] |
+ cpio | |
+ cppi | |
+ cpplib | |
+ cryptsetup | |
+ dfarc | [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] |
+ dink | |
+ doodle | |
+ e2fsprogs | |
+ enscript | |
+ exif | [] |
+ fetchmail | |
+ findutils | |
+ flex | |
+ freedink | [] |
+ gas | |
+ gawk | |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] |
+ gettext-tools | [] |
+ gip | [] [] |
+ gjay | |
+ gliv | |
+ glunarclock | [] |
+ gnubiff | |
+ gnucash | () () () () |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gold | |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] |
+ gpe-timesheet | [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] [] [] |
+ gstreamer | |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | |
+ hello | [] [] [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | |
+ iso_15924 | [] [] |
+ iso_3166 | [] [] () [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] |
+ iso_639 | [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] [] |
+ libc | [] |
+ libexif | |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | |
+ libidn | |
+ lifelines | |
+ liferea | |
+ lilypond | |
+ linkdr | |
+ lordsawar | |
+ lprng | |
+ lynx | |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | [] [] [] |
+ psmisc | |
+ pspp | |
+ pwdutils | |
+ radius | |
+ recode | |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] |
+ sed | |
+ sharutils | |
+ shishi | |
+ skencil | |
+ solfege | [] |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | [] |
+ tar | [] |
+ texinfo | [] |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] |
+ wyslij-po | |
+ xchat | [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +-----------------------------------------------+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] |
+ bfd | [] |
+ bibshelf | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] () |
+ buzztard | [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cppi | [] |
+ cpplib | [] |
+ cryptsetup | [] |
+ dfarc | [] |
+ dialog | [] [] [] [] |
+ dico | [] |
+ diffutils | [] [] [] [] [] [] |
+ dink | () |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ exif | [] [] [] () [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ freedink | [] [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] |
+ gip | [] [] [] [] [] |
+ gjay | |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] |
+ gnubiff | [] () |
+ gnucash | [] () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] [] |
+ gold | |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ grub | [] [] [] |
+ gsasl | [] [] [] [] |
+ gss | [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] |
+ hello | [] [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] [] [] [] |
+ iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] [] [] |
+ iso_4217 | [] [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] [] [] |
+ iso_639_3 | [] [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] [] [] |
+ keytouch-keyboa... | [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] |
+ ld | |
+ leafpad | [] [] [] [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] |
+ lifelines | [] [] |
+ liferea | [] [] [] [] [] () () [] |
+ lilypond | [] |
+ linkdr | [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] |
+ man-db-manpages | [] [] [] |
+ minicom | [] [] [] [] |
+ mkisofs | [] [] [] |
+ myserver | |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] |
+ pies | [] |
+ popt | [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] [] |
+ pwdutils | [] |
+ radius | [] [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () |
+ rpm | [] [] [] |
+ rush | [] [] |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] [] |
+ soundtracker | [] |
+ sp | |
+ sysstat | [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] [] |
+ vice | [] |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +---------------------------------------------------+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
+
+ sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] | 27
+ aegis | [] | 9
+ ant-phone | [] [] [] [] | 9
+ anubis | [] [] [] [] | 15
+ aspell | [] [] [] | 20
+ bash | [] [] [] | 12
+ bfd | [] | 6
+ bibshelf | [] [] [] | 16
+ binutils | [] [] | 8
+ bison | [] [] | 12
+ bison-runtime | [] [] [] [] [] [] | 29
+ bluez-pin | [] [] [] [] [] [] [] [] | 37
+ bombono-dvd | [] | 4
+ buzztard | [] | 7
+ cflow | [] [] [] | 9
+ clisp | | 10
+ coreutils | [] [] [] [] | 22
+ cpio | [] [] [] [] [] [] | 13
+ cppi | [] [] | 5
+ cpplib | [] [] [] [] [] [] | 14
+ cryptsetup | [] [] | 7
+ dfarc | [] | 9
+ dialog | [] [] [] [] [] [] [] | 30
+ dico | [] | 2
+ diffutils | [] [] [] [] [] [] | 30
+ dink | | 4
+ doodle | [] [] | 7
+ e2fsprogs | [] [] [] | 11
+ enscript | [] [] [] [] | 17
+ exif | [] [] [] | 16
+ fetchmail | [] [] [] | 17
+ findutils | [] [] [] [] [] | 20
+ flex | [] [] [] [] | 15
+ freedink | [] | 10
+ gas | [] | 4
+ gawk | [] [] [] [] | 18
+ gcal | [] [] | 5
+ gcc | [] [] [] | 7
+ gettext-examples | [] [] [] [] [] [] [] | 34
+ gettext-runtime | [] [] [] [] [] [] [] | 29
+ gettext-tools | [] [] [] [] [] [] | 22
+ gip | [] [] [] [] | 22
+ gjay | [] | 3
+ gliv | [] [] [] | 14
+ glunarclock | [] [] [] [] [] | 19
+ gnubiff | [] [] | 4
+ gnucash | () [] () [] () | 10
+ gnuedu | [] [] | 7
+ gnulib | [] [] [] [] | 16
+ gnunet | [] | 1
+ gnunet-gtk | [] [] [] | 5
+ gnutls | [] [] [] | 10
+ gold | [] | 4
+ gpe-aerial | [] [] [] | 18
+ gpe-beam | [] [] [] | 19
+ gpe-bluetooth | [] [] [] | 13
+ gpe-calendar | [] [] [] [] | 12
+ gpe-clock | [] [] [] [] [] | 28
+ gpe-conf | [] [] [] [] | 20
+ gpe-contacts | [] [] [] | 17
+ gpe-edit | [] [] [] | 12
+ gpe-filemanager | [] [] [] [] | 16
+ gpe-go | [] [] [] [] [] | 25
+ gpe-login | [] [] [] | 11
+ gpe-ownerinfo | [] [] [] [] [] | 25
+ gpe-package | [] [] [] | 13
+ gpe-sketchbook | [] [] [] | 20
+ gpe-su | [] [] [] [] [] | 30
+ gpe-taskmanager | [] [] [] [] [] | 29
+ gpe-timesheet | [] [] [] [] [] | 25
+ gpe-today | [] [] [] [] [] [] | 30
+ gpe-todo | [] [] [] [] | 17
+ gphoto2 | [] [] [] [] [] | 24
+ gprof | [] [] [] | 15
+ gpsdrive | [] [] [] | 11
+ gramadoir | [] [] [] | 11
+ grep | [] [] [] | 10
+ grub | [] [] [] | 14
+ gsasl | [] [] [] [] | 14
+ gss | [] [] [] | 11
+ gst-plugins-bad | [] [] [] [] | 26
+ gst-plugins-base | [] [] [] [] [] | 24
+ gst-plugins-good | [] [] [] [] | 24
+ gst-plugins-ugly | [] [] [] [] [] | 29
+ gstreamer | [] [] [] [] | 22
+ gtick | [] [] [] | 13
+ gtkam | [] [] [] | 20
+ gtkorphan | [] [] [] | 14
+ gtkspell | [] [] [] [] [] [] [] [] [] | 45
+ gutenprint | [] | 10
+ hello | [] [] [] [] [] [] | 21
+ help2man | [] [] | 7
+ hylafax | [] | 5
+ idutils | [] [] [] [] | 17
+ indent | [] [] [] [] [] [] | 30
+ iso_15924 | () [] () [] [] | 16
+ iso_3166 | [] [] () [] [] () [] [] [] () | 53
+ iso_3166_2 | () [] () [] | 9
+ iso_4217 | [] () [] [] () [] [] | 26
+ iso_639 | [] [] [] () [] () [] [] [] [] | 38
+ iso_639_3 | [] () | 8
+ jwhois | [] [] [] [] [] | 16
+ kbd | [] [] [] [] [] | 15
+ keytouch | [] [] [] | 16
+ keytouch-editor | [] [] [] | 14
+ keytouch-keyboa... | [] [] [] | 14
+ klavaro | [] | 11
+ latrine | [] [] [] | 10
+ ld | [] [] [] [] | 11
+ leafpad | [] [] [] [] [] [] | 33
+ libc | [] [] [] [] [] | 21
+ libexif | [] () | 7
+ libextractor | [] | 1
+ libgnutls | [] [] [] | 9
+ libgpewidget | [] [] [] | 14
+ libgpg-error | [] [] [] | 9
+ libgphoto2 | [] [] | 8
+ libgphoto2_port | [] [] [] [] | 14
+ libgsasl | [] [] [] | 13
+ libiconv | [] [] [] [] | 21
+ libidn | () [] [] | 11
+ lifelines | [] | 4
+ liferea | [] [] [] | 21
+ lilypond | [] | 7
+ linkdr | [] [] [] [] [] | 17
+ lordsawar | | 1
+ lprng | [] | 3
+ lynx | [] [] [] [] | 17
+ m4 | [] [] [] [] | 19
+ mailfromd | [] [] | 3
+ mailutils | [] | 5
+ make | [] [] [] [] | 21
+ man-db | [] [] [] | 8
+ man-db-manpages | | 4
+ minicom | [] [] | 16
+ mkisofs | [] [] | 9
+ myserver | | 0
+ nano | [] [] [] [] | 21
+ opcodes | [] [] [] | 11
+ parted | [] [] [] [] [] | 15
+ pies | [] [] | 3
+ popt | [] [] [] [] [] [] | 27
+ psmisc | [] [] | 11
+ pspp | | 4
+ pwdutils | [] [] | 6
+ radius | [] [] | 9
+ recode | [] [] [] [] | 28
+ rosegarden | () | 0
+ rpm | [] [] [] | 11
+ rush | [] [] | 4
+ sarg | | 1
+ screem | [] | 3
+ scrollkeeper | [] [] [] [] [] | 27
+ sed | [] [] [] [] [] | 30
+ sharutils | [] [] [] [] [] | 22
+ shishi | [] | 3
+ skencil | [] [] | 7
+ solfege | [] [] [] [] | 16
+ solfege-manual | [] | 8
+ soundtracker | [] [] [] | 9
+ sp | [] | 3
+ sysstat | [] [] | 15
+ tar | [] [] [] [] [] [] | 23
+ texinfo | [] [] [] [] [] | 17
+ tin | | 4
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux-ng | [] [] [] [] | 20
+ vice | () () | 1
+ vmm | [] | 4
+ vorbis-tools | [] | 6
+ wastesedge | | 2
+ wdiff | [] [] | 7
+ wget | [] [] [] [] [] | 26
+ wyslij-po | [] [] | 8
+ xchat | [] [] [] [] [] [] | 36
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63
+ xkeyboard-config | [] [] [] | 22
+ +---------------------------------------------------+
+ 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
diff -ur ../nitrogen-old/AUTHORS ./AUTHORS
--- ../nitrogen-old/AUTHORS 2011-04-20 13:51:19.000000000 +1200
+++ ./AUTHORS 2014-06-15 07:51:10.842698000 +1200
@@ -9,6 +9,9 @@
Евдокимов Сергей <usaf@rambler.ru> - patches
Siiseli Koulutus <tuki@siiseli.fi> - finnish translation
Cloudef <mailRoxas@gmail.com> - Xinerama mode resource leak fix
+ Julian Knauer <jpk@goatpr0n.de> - Xinerama/multihead --head select
+ Andrew Starr-Bochicchio <a.starr.b@gmail.com> - .desktop file
+ Evan Purkhiser <evanpurkhiser@gmail.com> - FDO thumbnails dir update
Items Ruthlessly Stolen:
Icon theme installer from Banshee
@@ -18,4 +21,4 @@
Mogaal/Nion - debian packages
Smoon - Arch packages
Omp - gentoo packages
- red_alert - Fedora
+ JamesNZ - Fedora
diff -ur ../nitrogen-old/ChangeLog ./ChangeLog
--- ../nitrogen-old/ChangeLog 2011-04-20 13:58:43.000000000 +1200
+++ ./ChangeLog 2014-06-15 07:51:10.842698000 +1200
@@ -1,3 +1,8 @@
+2013-12-19 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.am (EXTRA_DIST): Add m4/ChangeLog.
+ * configure.ac (AC_CONFIG_FILES): Add po/Makefile.in.
+
Tue Apr 19 21:55:56 EDT 2011 Dave Foster <daf@minuslab.net>
* Releasing 1.5.2.
* Fixed bug in Xinerama mode where X resources would be leaked on
diff -ur ../nitrogen-old/config.rpath ./config.rpath
--- ../nitrogen-old/config.rpath 2007-08-07 10:20:48.000000000 +1200
+++ ./config.rpath 2014-06-15 07:51:10.843698000 +1200
@@ -0,0 +1,690 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2013 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ ecc*)
+ wl='-Wl,'
+ ;;
+ icc* | ifort*)
+ wl='-Wl,'
+ ;;
+ lf95*)
+ wl='-Wl,'
+ ;;
+ nagfor*)
+ wl='-Wl,-Wl,,'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ wl=
+ ;;
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ newsos6)
+ ;;
+ *nto* | *qnx*)
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ wl='-Qoption ld '
+ ;;
+ *)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ case "$host_cpu" in
+ powerpc)
+ ;;
+ m68k)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ haiku*)
+ ;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ case "$host_cpu" in
+ powerpc)
+ ;;
+ m68k)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ *nto* | *qnx*)
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ library_names_spec='$libname.a'
+ ;;
+ aix[4-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ amigaos*)
+ case "$host_cpu" in
+ powerpc*)
+ library_names_spec='$libname$shrext' ;;
+ m68k)
+ library_names_spec='$libname.a' ;;
+ esac
+ ;;
+ beos*)
+ library_names_spec='$libname$shrext'
+ ;;
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ library_names_spec='$libname$shrext'
+ ;;
+ dgux*)
+ library_names_spec='$libname$shrext'
+ ;;
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
+ ;;
+ gnu*)
+ library_names_spec='$libname$shrext'
+ ;;
+ haiku*)
+ library_names_spec='$libname$shrext'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ netbsd*)
+ library_names_spec='$libname$shrext'
+ ;;
+ newsos6)
+ library_names_spec='$libname$shrext'
+ ;;
+ *nto* | *qnx*)
+ library_names_spec='$libname$shrext'
+ ;;
+ openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ library_names_spec='$libname.a'
+ ;;
+ osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
+ ;;
+ tpf*)
+ library_names_spec='$libname$shrext'
+ ;;
+ uts4*)
+ library_names_spec='$libname$shrext'
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff -ur ../nitrogen-old/configure.ac ./configure.ac
--- ../nitrogen-old/configure.ac 2011-04-20 13:52:10.000000000 +1200
+++ ./configure.ac 2014-06-15 07:59:29.507376166 +1200
@@ -1,21 +1,20 @@
-AC_PREREQ(2.59)
+AC_PREREQ([2.69])
AC_INIT([nitrogen],[1.5.2],[daf@minuslab.net])
-AC_CONFIG_HEADER(config.h)
-AM_INIT_AUTOMAKE
+AC_CONFIG_SRCDIR([config.h.in])
+AC_CONFIG_HEADER([config.h])
+AC_CONFIG_AUX_DIR([.])
AC_ISC_POSIX
AC_HEADER_STDC++
+AM_INIT_AUTOMAKE([-Wno-obsolete])
+
AC_PROG_CXX
+AC_PROG_AWK
+AC_PROG_CC
+AC_PROG_CPP
AC_PROG_RANLIB
AC_PROG_INSTALL
-
-ALL_LINGUAS=""
-AM_GNU_GETTEXT_VERSION(0.16)
-AM_GNU_GETTEXT([external])
-AC_DEFINE_UNQUOTED(LOCALEDIR, "${prefix}/${DATADIRNAME}/locale", [Name of gettext locale directory])
-
-AC_LANG([C++])
-AC_LANG_COMPILER_REQUIRE
-AC_HEADER_STDC([])
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
dnl
dnl Our depend list
@@ -26,49 +25,75 @@
GTKMM2_VERSION=2.10.0
GTHREAD2_VERSION=2.6.0
-AC_SUBST(GLIB2_VERSION)
-AC_SUBST(GTK2_VERSION)
+AC_SUBST([GLIB2_VERSION])
+AC_SUBST([GTK2_VERSION])
-PKG_CHECK_MODULES(GLIB2,[glib-2.0 >= $GLIB2_VERSION])
-PKG_CHECK_MODULES(GTK2,[gtk+-2.0 >= $GTK2_VERSION])
-PKG_CHECK_MODULES(GTKMM2, [gtkmm-2.4 >= $GTKMM2_VERSION])
-PKG_CHECK_MODULES(GTHREAD2, [gthread-2.0 >= $GTHREAD2_VERSION])
+PKG_CHECK_MODULES([GLIB2], [glib-2.0 >= $GLIB2_VERSION])
+PKG_CHECK_MODULES([GTK2], [gtk+-2.0 >= $GTK2_VERSION])
+PKG_CHECK_MODULES([GTKMM2], [gtkmm-2.4 >= $GTKMM2_VERSION])
+PKG_CHECK_MODULES([GTHREAD2], [gthread-2.0 >= $GTHREAD2_VERSION])
NITROGEN_LIBS="$GLIB2_LIBS $GTK2_LIBS $GTKMM2_LIBS $GTHREAD2_LIBS"
NITROGEN_CFLAGS="$GLIB2_CFLAGS $GTK2_CFLAGS $GTKMM2_CFLAGS $GTHREAD2_CFLAGS"
-dnl do some autotools picen to get inotify
-AC_ARG_ENABLE(inotify, [ --disable-inotify disable support for inotify watching of dirs (default: enabled)], [enable_inotify=$enableval],[enable_inotify=yes])
-AC_ARG_ENABLE(debug, [ --enable-debug enable debugging flags ])
+ALL_LINGUAS=""
+AM_GNU_GETTEXT([external])
+AM_GNU_GETTEXT_VERSION([0.16])
+AC_DEFINE_UNQUOTED([LOCALEDIR], ["${prefix}/${DATADIRNAME}/locale"], [Name of gettext locale directory])
+
+AC_LANG([C++])
+AC_LANG_COMPILER_REQUIRE
+AC_HEADER_STDC([])
+
+# Check for header files
+AC_CHECK_HEADERS([libintl.h string.h sys/time.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_CHECK_HEADER_STDBOOL
+AC_C_INLINE
+AC_TYPE_SSIZE_T
+AC_TYPE_UINT32_T
+
+# Checks for library functions.
+AC_CHECK_FUNCS([select])
+
+# Get autotools to use inotify
+AC_ARG_ENABLE([inotify], [ --disable-inotify disable support for inotify watching of dirs (default: enabled)], [enable_inotify=$enableval],[enable_inotify=yes])
+
+AC_ARG_ENABLE([debug], [ --enable-debug enable debugging flags ])
if test "$enable_debug" = "yes"; then
CXXFLAGS+=" -g -g3 -ggdb -DDEBUG"
fi
if test x$enable_inotify = xyes; then
- AC_DEFINE(USE_INOTIFY, 1, [Define to enable inotify dir watching])
+ AC_DEFINE([USE_INOTIFY], 1, [Define to enable inotify dir watching])
fi
-dnl now do some proper checking for Xinerama
-AC_ARG_ENABLE(xinerama, [ --disable-xinerama disable support for Xinerama (default: enabled)], [enable_xinerama=$enableval],[enable_xinerama=yes])
+# Check for Xinerama
+AC_ARG_ENABLE([xinerama], [ --disable-xinerama disable support for Xinerama (default: enabled)], [enable_xinerama=$enableval],[enable_xinerama=yes])
if test x$enable_xinerama = xyes; then
- AC_CHECK_LIB(Xinerama, XineramaQueryScreens,
+ AC_CHECK_LIB([Xinerama], [XineramaQueryScreens],
[AC_DEFINE(USE_XINERAMA, 1, [Define to enable Xinerama])
NITROGEN_LIBS="$NITROGEN_LIBS -lXinerama"],
[enable_xinerama=no])
fi
-AC_SUBST(NITROGEN_LIBS)
-AC_SUBST(NITROGEN_CFLAGS)
+AC_SUBST([NITROGEN_LIBS])
+AC_SUBST([NITROGEN_CFLAGS])
-AC_CONFIG_FILES(Makefile src/Makefile data/Makefile data/icons/Makefile po/Makefile.in)
+AC_CONFIG_FILES([Makefile
+ po/Makefile.in
+ data/Makefile
+ data/icons/Makefile
+ src/Makefile])
AC_OUTPUT
-dnl syscrash says don't test for inotify support in kernel for some reason
+# syscrash says don't test for inotify support in kernel for some reason
echo ""
echo "##########################################"
echo ""
diff -ur ../nitrogen-old/Makefile.am ./Makefile.am
--- ../nitrogen-old/Makefile.am 2009-02-24 09:36:54.000000000 +1300
+++ ./Makefile.am 2014-06-15 07:51:10.843698000 +1200
@@ -1,3 +1,5 @@
SUBDIRS = po src data
#DIST_SUBDIRS = data
-EXTRA_DIST = config.rpath bootstrap
+EXTRA_DIST = m4/ChangeLog m4/ChangeLog m4/ChangeLog m4/ChangeLog config.rpath bootstrap
+
+ACLOCAL_AMFLAGS = -I m4
diff -ur ../nitrogen-old/po/ChangeLog ./po/ChangeLog
--- ../nitrogen-old/po/ChangeLog 2007-08-07 10:20:48.000000000 +1200
+++ ./po/ChangeLog 2014-06-15 07:51:10.845698000 +1200
@@ -1,3 +1,8 @@
+2013-12-19 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: New file, from gettext-0.18.3.
+ * Rules-quot: Upgrade to gettext-0.18.3.
+
2007-05-25 gettextize <bug-gnu-gettext@gnu.org>
* Makefile.in.in: New file, from gettext-0.16.1.
diff -ur ../nitrogen-old/po/Makefile.in.in ./po/Makefile.in.in
--- ../nitrogen-old/po/Makefile.in.in 2007-08-07 10:20:48.000000000 +1200
+++ ./po/Makefile.in.in 2014-06-15 07:51:10.845698000 +1200
@@ -1,5 +1,5 @@
# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
@@ -8,12 +8,14 @@
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
-# Origin: gettext-0.16
+# Origin: gettext-0.18.3
+GETTEXT_MACRO_VERSION = 0.18
PACKAGE = @PACKAGE@
VERSION = @VERSION@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+SED = @SED@
SHELL = /bin/sh
@SET_MAKE@
@@ -87,8 +89,8 @@
.po.gmo:
@lang=`echo $* | sed -e 's,.*/,,'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
.sin.sed:
sed -e '/^#/d' $< > t-$@
@@ -100,6 +102,13 @@
all-yes: stamp-po
all-no:
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+ test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+ exit 1; \
+ }
+
# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
@@ -115,6 +124,7 @@
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
+ @$(CHECK_MACRO_VERSION)
test ! -f $(srcdir)/$(DOMAIN).pot || \
test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
@test ! -f $(srcdir)/$(DOMAIN).pot || { \
@@ -129,17 +139,43 @@
# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
+ else \
+ LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
+ fi; \
+ } | grep -v 'libtool:' >/dev/null; then \
+ package_gnu='GNU '; \
+ else \
+ package_gnu=''; \
+ fi; \
if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
else \
msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
fi; \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address="$$msgid_bugs_address"
+ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ *) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --package-name="$${package_gnu}@PACKAGE@" \
+ --package-version='@VERSION@' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ esac
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
@@ -167,8 +203,15 @@
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
if test -f "$(srcdir)/$${lang}.po"; then \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) \
+ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
+ esac; \
+ }; \
else \
$(MAKE) $${lang}.po-create; \
fi
@@ -191,7 +234,6 @@
fi
install-data-no: all
install-data-yes: all
- $(mkdir_p) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
@@ -243,7 +285,6 @@
fi
installdirs-data-no:
installdirs-data-yes:
- $(mkdir_p) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
@@ -369,9 +410,15 @@
tmpdir=`pwd`; \
echo "$$lang:"; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
cd $(srcdir); \
- if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+ esac; \
+ }; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
@@ -392,9 +439,13 @@
update-gmo: Makefile $(GMOFILES)
@:
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
cd $(top_builddir) \
- && $(SHELL) ./config.status $(subdir)/$@.in po-directories
+ && @SHELL@ ./config.status $(subdir)/$@.in po-directories
force:
diff -ur ../nitrogen-old/po/Makevars ./po/Makevars
--- ../nitrogen-old/po/Makevars 2007-08-07 10:20:48.000000000 +1200
+++ ./po/Makevars 2014-06-15 07:51:10.845698000 +1200
@@ -39,3 +39,15 @@
# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used. It is usually empty.
EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context. Possible values are "yes" and "no". Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+# --previous to keep previous msgids of translated messages,
+# --quiet to reduce the verbosity.
+MSGMERGE_OPTIONS =
diff -ur ../nitrogen-old/po/Rules-quot ./po/Rules-quot
--- ../nitrogen-old/po/Rules-quot 2007-08-07 10:20:48.000000000 +1200
+++ ./po/Rules-quot 2014-06-15 07:51:10.845698000 +1200
@@ -14,13 +14,13 @@
.insert-header.po-update-en:
@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
- if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
ll=`echo $$lang | sed -e 's/@.*//'`; \
LC_ALL=C; export LC_ALL; \
cd $(srcdir); \
- if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \