Using the bcm43xx-fwcutter tool to install Broadcom firmware in Fedora.
-----------------------------------------------------------------------

To use the bcm43xx driver which is part of the Fedora kernel, you need
to extract the firmware which is part of the official MacOS, Windows,
or Linux drivers.

If your Fedora installation is dual-booting with MacOS or Windows, then
you probably already have a suitable driver available. Otherwise, the
README file contains a number of links from which you can download 
drivers. It shouldn't matter which one you use -- the kernel's bcm43xx
driver ought to work with all of them.

Having obtained the file from which you wish to extract the firmware,
run this command as root. Replace '<DRIVERFILE>' with the actual name
of the file, of course:

   bcm43xx-fwcutter -w /lib/firmware <DRIVERFILE>

This will save the various firmware files into the /lib/firmware
directory, from where the kernel can load them when necessary.

Because the bcm43xx driver is new and experimental, it is not configured
to be automatically loaded in the Fedora Core 5 kernel. In order to
ensure that the driver is loaded, you may need to copy the
'modprobe.bcm43xx' file into the /etc/modprobe.d directory.

Please report your success or failure with the bcm43xx driver in
bugzilla at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=186329