%define cross cross
%define rpmprefix %{nil}
%define build_all 1
%define build_aarch64 %{build_all}
%define build_alpha %{build_all}
%define build_arm %{build_all}
%define build_avr32 %{build_all}
%define build_blackfin %{build_all}
%define build_c6x %{build_all}
%define build_frv %{build_all}
%define build_h8300 %{build_all}
%define build_hppa %{build_all}
%define build_hppa64 %{build_all}
%define build_ia64 %{build_all}
%define build_m32r %{build_all}
%define build_m68k %{build_all}
%define build_mips64 %{build_all}
%define build_mn10300 %{build_all}
%define build_powerpc64 %{build_all}
%define build_s390x %{build_all}
%define build_sh %{build_all}
%define build_sh64 %{build_all}
%define build_sparc64 %{build_all}
%define build_tile %{build_all}
%define build_x86_64 %{build_all}
%define build_xtensa %{build_all}
# built compiler generates lots of ICEs
%define build_cris 0
# gcc considers obsolete
%define build_score 0
# gcc doesn't build
%define build_microblaze 0
# 32-bit packages we don't build as we can use the 64-bit package instead
%define build_i386 0
%define build_mips 0
%define build_powerpc 0
%define build_s390 0
%define build_sh4 0
%define build_sparc 0
# gcc doesn't support
%define build_openrisc 0
# not available in binutils-2.22
%define build_unicore32 0
%global build_cloog 1
%global multilib_64_archs sparc64 ppc64 s390x x86_64
# we won't build libgcc for these as it depends on C library or kernel headers
%define no_libgcc_targets cris*|s390*|sh*|tile-*
###############################################################################
#
# The gcc versioning information. In a sed command below, the specfile winds
# pre-release version numbers in BASE-VER back to the last actually-released
# number.
%global DATE 20130717
%global SVNREV 201013
%global gcc_version 4.8.1
# Note, gcc_release must be integer, if you want to add suffixes to
# %{release}, append them after %{gcc_release} on Release: line.
%global gcc_release 5
Summary: Cross C compiler
Name: %{cross}-gcc
Version: %{gcc_version}
Release: %{gcc_release}.2%{?dist}
# libgcc, libgfortran, libmudflap, libgomp, libstdc++ and crtstuff have
# GCC Runtime Exception.
License: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
Group: Development/Languages
URL: http://gcc.gnu.org
# The source for this package was pulled from upstream's vcs. Use the
# following commands to generate the tarball:
# svn export svn://gcc.gnu.org/svn/gcc/branches/redhat/gcc-4_7-branch@%{SVNREV} gcc-%{version}-%{DATE}
# tar cf - gcc-%{version}-%{DATE} | bzip2 -9 > gcc-%{version}-%{DATE}.tar.bz2
%define srcdir gcc-%{version}-%{DATE}
Source0: %{srcdir}.tar.bz2
%global isl_version 0.11.1
Source1: ftp://gcc.gnu.org/pub/gcc/infrastructure/isl-%{isl_version}.tar.bz2
%global cloog_version 0.18.0
Source2: ftp://gcc.gnu.org/pub/gcc/infrastructure/cloog-%{cloog_version}.tar.gz
Patch0: gcc48-hack.patch
Patch1: gcc48-java-nomulti.patch
Patch2: gcc48-ppc32-retaddr.patch
Patch3: gcc48-rh330771.patch
Patch4: gcc48-i386-libgomp.patch
Patch5: gcc48-sparc-config-detection.patch
Patch6: gcc48-libgomp-omp_h-multilib.patch
Patch7: gcc48-libtool-no-rpath.patch
Patch8: gcc48-cloog-dl.patch
Patch9: gcc48-cloog-dl2.patch
Patch10: gcc48-pr38757.patch
Patch11: gcc48-libstdc++-docs.patch
Patch12: gcc48-no-add-needed.patch
Patch13: gcc48-pr56564.patch
Patch14: gcc48-pr56493.patch
Patch100: cross-intl-filename.patch
# ia64 - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44553
# m68k - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53557
# alpha - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=55344
Patch101: cross-gcc-with-libgcc.patch
Patch102: cross-gcc-sh-libgcc.patch
Patch103: cross-gcc-4.8.1-fix-varasm.patch
Patch104: gcc48-tmake_in_config.patch
Patch1100: isl-%{isl_version}-aarch64-config.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: binutils >= 2.20.51.0.2-12
BuildRequires: zlib-devel, gettext, dejagnu, bison, flex, texinfo, sharutils
BuildRequires: %{cross}-binutils-common >= 2.23.88
# Make sure pthread.h doesn't contain __thread tokens
# Make sure glibc supports stack protector
# Make sure glibc supports DT_GNU_HASH
BuildRequires: glibc-devel >= 2.4.90-13
%ifarch %{multilib_64_archs} sparcv9 ppc
# Ensure glibc{,-devel} is installed for both multilib arches
BuildRequires: /lib/libc.so.6 /usr/lib/libc.so /lib64/libc.so.6 /usr/lib64/libc.so
%endif
BuildRequires: elfutils-devel >= 0.147
BuildRequires: elfutils-libelf-devel >= 0.147
BuildRequires: gmp-devel >= 4.2, mpfr-devel >= 2.3.1, libmpc-devel >= 0.8.1
Provides: bundled(libiberty)
%description
Cross-build GNU C compiler collection.
%package -n %{cross}-gcc-common
Summary: Cross-build GNU C compiler documentation and translation files
Group: Development/Languages
BuildArch: noarch
%description -n %{cross}-gcc-common
Documentation, manual pages and translation files for cross-build GNU C
compiler.
This is the common part of a set of cross-build GNU C compiler packages for
building kernels for other architectures. No support for cross-building
user space programs is currently supplied as that would massively multiply the
number of packages.
%define do_package() \
%if %2 \
%package -n %{rpmprefix}gcc-%1 \
Summary: Cross-build binary utilities for %1 \
Group: Development/Tools \
Requires: %{cross}-gcc-common == %{version}-%{release} \
BuildRequires: %{rpmprefix}binutils-%1 >= 2.23.88 \
Requires: %{rpmprefix}binutils-%1 >= 2.23.88 \
%description -n %{rpmprefix}gcc-%1 \
Cross-build GNU C compiler. \
\
Only building kernels is currently supported. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
%endif
%define do_symlink() \
%if %2 \
%package -n gcc-%1 \
Summary: Cross-build binary utilities for %1 \
Group: Development/Tools \
Requires: gcc-%3 == %{version}-%{release} \
%description -n gcc-%1 \
Cross-build GNU C compiler. \
\
Only building kernels is currently supported. Support for cross-building \
user space programs is not currently provided as that would massively multiply \
the number of packages. \
%endif
%do_package alpha-linux-gnu %{build_alpha}
%do_package arm-linux-gnu %{build_arm}
%do_package aarch64-linux-gnu %{build_aarch64}
%do_package avr32-linux-gnu %{build_avr32}
%do_package bfin-linux-gnu %{build_blackfin}
%do_package c6x-linux-gnu %{build_c6x}
%do_package cris-linux-gnu %{build_cris}
%do_package frv-linux-gnu %{build_frv}
%do_package h8300-linux-gnu %{build_h8300}
%do_package hppa-linux-gnu %{build_hppa}
%do_package hppa64-linux-gnu %{build_hppa64}
%do_package i386-linux-gnu %{build_i386}
%do_package ia64-linux-gnu %{build_ia64}
%do_package m32r-linux-gnu %{build_m32r}
%do_package m68k-linux-gnu %{build_m68k}
%do_package microblaze-linux-gnu %{build_microblaze}
%do_package mips-linux-gnu %{build_mips}
%do_package mips64-linux-gnu %{build_mips64}
%do_package mn10300-linux-gnu %{build_mn10300}
%do_package openrisc-linux-gnu %{build_openrisc}
%do_package powerpc-linux-gnu %{build_powerpc}
%do_package powerpc64-linux-gnu %{build_powerpc64}
%do_symlink ppc-linux-gnu %{build_powerpc} powerpc-linux-gnu
%do_symlink ppc64-linux-gnu %{build_powerpc64} powerpc64-linux-gnu
%do_package s390-linux-gnu %{build_s390}
%do_package s390x-linux-gnu %{build_s390x}
%do_package score-linux-gnu %{build_score}
%do_package sh-linux-gnu %{build_sh}
%do_package sh4-linux-gnu %{build_sh4}
%do_package sh64-linux-gnu %{build_sh64}
%do_package sparc-linux-gnu %{build_sparc}
%do_package sparc64-linux-gnu %{build_sparc64}
%do_package tile-linux-gnu %{build_tile}
%do_package unicore32-linux-gnu %{build_unicore32}
%do_package x86_64-linux-gnu %{build_x86_64}
%do_package xtensa-linux-gnu %{build_xtensa}
###############################################################################
#
# Preparation
#
###############################################################################
%prep
%setup -q -n %{srcdir} -c -a 1 -a 2
cd %{srcdir}
%patch0 -p0 -b .hack~
%patch1 -p0 -b .java-nomulti~
%patch2 -p0 -b .ppc32-retaddr~
%patch3 -p0 -b .rh330771~
%patch4 -p0 -b .i386-libgomp~
%patch5 -p0 -b .sparc-config-detection~
%patch6 -p0 -b .libgomp-omp_h-multilib~
%patch7 -p0 -b .libtool-no-rpath~
%if %{build_cloog}
%patch8 -p0 -b .cloog-dl~
%patch9 -p0 -b .cloog-dl2~
%endif
%patch10 -p0 -b .pr38757~
%patch12 -p0 -b .no-add-needed~
%patch13 -p0 -b .pr56564~
%patch14 -p0 -b .pr56493~
%patch100 -p0 -b .cross-intl~
%patch101 -p1 -b .with-libgcc~
%patch102 -p0 -b .sh-libgcc~
%patch103 -p1 -b .varasm~
%patch104 -p0 -b .tmake~
cd ..
%patch1100 -p0 -b .isl-aarch64~
cd -
# Move the version number back to 4.7.2
sed -i -e 's/4\.8\.2/4.8.1/' gcc/BASE-VER
echo 'Red Hat %{version}-%{gcc_release}' > gcc/DEV-PHASE
%if 0%{?fedora} >= 16 || 0%{?rhel} >= 7
# Default to -gdwarf-4 -fno-debug-types-section rather than -gdwarf-2
sed -i '/UInteger Var(dwarf_version)/s/Init(2)/Init(4)/' gcc/common.opt
sed -i '/flag_debug_types_section/s/Init(1)/Init(0)/' gcc/common.opt
sed -i '/dwarf_record_gcc_switches/s/Init(0)/Init(1)/' gcc/common.opt
sed -i 's/\(may be either 2, 3 or 4; the default version is \)2\./\14./' gcc/doc/invoke.texi
%else
# Default to -gdwarf-3 rather than -gdwarf-2
sed -i '/UInteger Var(dwarf_version)/s/Init(2)/Init(3)/' gcc/common.opt
sed -i 's/\(may be either 2, 3 or 4; the default version is \)2\./\13./' gcc/doc/invoke.texi
sed -i 's/#define[[:blank:]]*EMIT_ENTRY_VALUE[[:blank:]].*$/#define EMIT_ENTRY_VALUE 0/' gcc/{var-tracking,dwarf2out}.c
sed -i 's/#define[[:blank:]]*EMIT_TYPED_DWARF_STACK[[:blank:]].*$/#define EMIT_TYPED_DWARF_STACK 0/' gcc/dwarf2out.c
sed -i 's/#define[[:blank:]]*EMIT_DEBUG_MACRO[[:blank:]].*$/#define EMIT_DEBUG_MACRO 0/' gcc/dwarf2out.c
%endif
./contrib/gcc_update --touch
LC_ALL=C sed -i -e 's/\xa0/ /' gcc/doc/options.texi
function prep_target () {
target=$1
cond=$2
if [ $cond != 0 ]
then
echo $1 >&5
fi
}
cd ..
(
prep_target alpha-linux-gnu %{build_alpha}
prep_target arm-linux-gnu %{build_arm}
prep_target aarch64-linux-gnu %{build_aarch64}
prep_target avr32-linux-gnu %{build_avr32}
prep_target bfin-linux-gnu %{build_blackfin}
prep_target c6x-linux-gnu %{build_c6x}
prep_target cris-linux-gnu %{build_cris}
prep_target frv-linux-gnu %{build_frv}
prep_target h8300-linux-gnu %{build_h8300}
prep_target hppa-linux-gnu %{build_hppa}
prep_target hppa64-linux-gnu %{build_hppa64}
prep_target i386-linux-gnu %{build_i386}
prep_target ia64-linux-gnu %{build_ia64}
prep_target m32r-linux-gnu %{build_m32r}
prep_target m68k-linux-gnu %{build_m68k}
prep_target microblaze-linux-gnu %{build_microblaze}
prep_target mips-linux-gnu %{build_mips}
prep_target mips64-linux-gnu %{build_mips64}
prep_target mn10300-linux-gnu %{build_mn10300}
prep_target openrisc-linux-gnu %{build_openrisc}
prep_target powerpc-linux-gnu %{build_powerpc}
prep_target powerpc64-linux-gnu %{build_powerpc64}
prep_target s390-linux-gnu %{build_s390}
prep_target s390x-linux-gnu %{build_s390x}
prep_target score-linux-gnu %{build_score}
prep_target sh-linux-gnu %{build_sh}
prep_target sh4-linux-gnu %{build_sh4}
prep_target sh64-linux-gnu %{build_sh64}
prep_target sparc-linux-gnu %{build_sparc}
prep_target sparc64-linux-gnu %{build_sparc64}
prep_target tile-linux-gnu %{build_tile}
prep_target unicore32-linux-gnu %{build_unicore32}
prep_target x86_64-linux-gnu %{build_x86_64}
prep_target xtensa-linux-gnu %{build_xtensa}
) 5>target.list
n=0
for target in `cat target.list`
do
n=1
break
done
if [ $n = 0 ]
then
echo "No targets selected" >&2
exit 8
fi
###############################################################################
#
# Build
#
###############################################################################
%build
%define builddir %{_builddir}/%{srcdir}
# Undo the broken autoconf change in recent Fedora versions
export CONFIG_SITE=NONE
#
# Configure and build the ISL and CLooG libraries
#
%if %{build_cloog}
%define isl_source %{builddir}/isl-%{isl_version}
%define isl_build %{builddir}/isl-build
%define isl_install %{builddir}/isl-install
mkdir %{isl_build} %{isl_install}
%ifarch s390 s390x
ISL_FLAG_PIC=-fPIC
%else
ISL_FLAG_PIC=-fpic
%endif
cd %{isl_build}
%{isl_source}/configure \
--disable-shared \
CC=/usr/bin/gcc \
CXX=/usr/bin/g++ \
CFLAGS="${CFLAGS:-%optflags} $ISL_FLAG_PIC" \
--prefix=%{isl_install}
make %{?_smp_mflags}
make install
cd ..
%define cloog_source %{builddir}/cloog-%{cloog_version}
%define cloog_build %{builddir}/cloog-build
%define cloog_install %{builddir}/cloog-install
mkdir %{cloog_build} %{builddir}/cloog-install
cd %{cloog_build}
cat >> %{cloog_source}/source/isl/constraints.c << \EOF
#include <isl/flow.h>
static void __attribute__((used)) *s1 = (void *) isl_union_map_compute_flow;
static void __attribute__((used)) *s2 = (void *) isl_map_dump;
EOF
sed -i 's|libcloog|libgcc48privatecloog|g' \
%{cloog_source}/{,test/}Makefile.{am,in}
%{cloog_source}/configure \
--with-isl=system \
--with-isl-prefix=%{isl_install} \
CC=/usr/bin/gcc \
CXX=/usr/bin/g++ \
CFLAGS="${CFLAGS:-%optflags}" \
CXXFLAGS="${CXXFLAGS:-%optflags}" \
--prefix=%{cloog_install}
sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool
sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool
make %{?_smp_mflags}
make %{?_smp_mflags} install
cd %{cloog_install}/lib
rm libgcc48privatecloog-isl.so{,.4}
mv libgcc48privatecloog-isl.so.4.0.0 libcloog-isl.so.4
ln -sf libcloog-isl.so.4 libcloog-isl.so
ln -sf libcloog-isl.so.4 libcloog.so
%endif
#
# Configure the compiler
#
cd %{builddir}
function config_target () {
echo "=== CONFIGURING $1"
arch=$1
prefix=$arch-
build_dir=$1
case $arch in
arm-*) target=arm-linux-gnueabi;;
avr32-*) target=avr-linux;;
bfin-*) target=bfin-uclinux;;
c6x-*) target=c6x-uclinux;;
h8300-*) target=h8300-elf;;
mn10300-*) target=am33_2.0-linux;;
openrisc-*) target=or32-linux;;
parisc-*) target=hppa-linux;;
score-*) target=score-elf;;
sh64-*) target=sh64-linux;;
tile-*) target=tilegx-linux;;
v850-*) target=v850e-linux;;
x86-*) target=x86_64-linux;;
*) target=$arch;;
esac
echo $arch: target is $target
#export CFLAGS="$RPM_OPT_FLAGS"
CONFIG_FLAGS=
case $arch in
arm)
CONFIG_FLAGS="--with-cpu=cortex-a8 --with-tune=cortex-a8 --with-arch=armv7-a \
--with-float=hard --with-fpu=vfpv3-d16 --with-abi=aapcs-linux"
;;
powerpc-*|powerpc64-*)
CONFIG_FLAGS="--with-cpu-32=power4 --with-tune-32=power6 --with-cpu-64=power4 --with-tune-64=power6 --enable-secureplt"
;;
s390*-*)
CONFIG_FLAGS="--with-arch=z9-109 --with-tune=z10 --enable-decimal-float"
;;
sh-*)
CONFIG_FLAGS=--with-multilib-list=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single,!m2a,!m2a-single
;;
sh64-*)
CONFIG_FLAGS=--with-multilib-list=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu
;;
sparc-*)
CONFIG_FLAGS="--disable-linux-futex"
;;
tile-*)
#CONFIG_FLAGS="--with-arch_32=tilepro"
;;
x86-*)
CONFIG_FLAGS="--with-arch_32=i686"
;;
esac
case $arch in
alpha|powerpc*|s390*|sparc*)
CONFIG_FLAGS="$CONFIG_FLAGS --with-long-double-128" ;;
esac
mkdir $build_dir
cd $build_dir
# We could optimize the cross builds size by --enable-shared but the produced
# binaries may be less convenient in the embedded environment.
AR_FOR_TARGET=%{_bindir}/$arch-ar \
AS_FOR_TARGET=%{_bindir}/$arch-as \
DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \
LD_FOR_TARGET=%{_bindir}/$arch-ld \
NM_FOR_TARGET=%{_bindir}/$arch-nm \
OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \
RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \
STRIP_FOR_TARGET=%{_bindir}/$arch-strip \
WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \
WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \
LDFLAGS='-Wl,-z,relro ' \
../%{srcdir}/configure \
--bindir=%{_bindir} \
--build=%{_target_platform} \
--datadir=%{_datadir} \
--disable-decimal-float \
--disable-dependency-tracking \
--disable-gold \
--disable-libgomp \
--disable-libmudflap \
--disable-libquadmath \
--disable-libssp \
--disable-nls \
--disable-plugin \
--disable-shared \
--disable-silent-rules \
--disable-sjlj-exceptions \
--disable-threads \
--enable-checking=$checking \
--enable-gnu-unique-object \
--enable-initfini-array \
--enable-languages=c \
--enable-linker-build-id \
--enable-nls \
--enable-obsolete \
--enable-targets=all \
--exec-prefix=%{_exec_prefix} \
--host=%{_target_platform} \
--includedir=%{_includedir} \
--infodir=%{_infodir} \
--libexecdir=%{_libexecdir} \
--localstatedir=%{_localstatedir} \
--mandir=%{_mandir} \
--prefix=%{_prefix} \
--program-prefix=$prefix \
--sbindir=%{_sbindir} \
--sharedstatedir=%{_sharedstatedir} \
--sysconfdir=%{_sysconfdir} \
--target=$target \
--with-bugurl=http://bugzilla.redhat.com/bugzilla/ \
--with-linker-hash-style=gnu \
--with-newlib \
--with-system-libunwind \
--with-system-zlib \
--without-headers \
%if %{build_cloog}
--with-isl=%{isl_install} --with-cloog=%{cloog_install} \
%else
--without-isl --without-cloog \
%endif
$CONFIG_FLAGS
%if 0
--libdir=%{_libdir} # we want stuff in /usr/lib/gcc/ not /usr/lib64/gcc
--with-sysroot=%{_prefix}/$target/sys-root
%endif
cd ..
}
for target in `cat target.list`
do
config_target $target
done
function build_target () {
echo "=== BUILDING $1"
arch=$1
build_dir=$1
AR_FOR_TARGET=%{_bindir}/$arch-ar \
AS_FOR_TARGET=%{_bindir}/$arch-as \
DLLTOOL_FOR_TARGET=%{_bindir}/$arch-dlltool \
LD_FOR_TARGET=%{_bindir}/$arch-ld \
NM_FOR_TARGET=%{_bindir}/$arch-nm \
OBJDUMP_FOR_TARGET=%{_bindir}/$arch-objdump \
RANLIB_FOR_TARGET=%{_bindir}/$arch-ranlib \
STRIP_FOR_TARGET=%{_bindir}/$arch-strip \
WINDRES_FOR_TARGET=%{_bindir}/$arch-windres \
WINDMC_FOR_TARGET=%{_bindir}/$arch-windmc \
make -C $build_dir %{_smp_mflags} tooldir=%{_prefix} all-gcc
case $arch in
%{no_libgcc_targets})
;;
*)
make -C $build_dir %{_smp_mflags} tooldir=%{_prefix} all-target-libgcc
;;
esac
}
for target in `cat target.list`
do
build_target $target
done
###############################################################################
#
# Installation
#
###############################################################################
%install
rm -rf %{buildroot}
function install_bin () {
echo "=== INSTALLING $1"
arch=$1
cpu=${1%%%%-*}
case $arch in
%{no_libgcc_targets}) with_libgcc="";;
*) with_libgcc="install-target-libgcc";;
esac
make -C $arch DESTDIR=%{buildroot} install-gcc ${with_libgcc}
# We want links for ppc and ppc64 also if we make powerpc or powerpc64
case $cpu in
powerpc*)
cd %{buildroot}/usr/bin
for i in $cpu-*
do
ln -s $i ppc${i#powerpc}
done
cd -
;;
esac
}
for target in `cat target.list`
do
install_bin $target
done
grep ^powerpc target.list | sed -e s/powerpc/ppc/ >symlink-target.list
# We have to copy cloog somewhere graphite can dlopen it from
%if %{build_cloog}
for i in %{buildroot}%{_prefix}/lib/gcc/*/%{gcc_version}
do
cp -a %{cloog_install}/lib/libcloog-isl.so.4 $i
done
%endif
# For cross-gcc we drop the documentation.
rm -rf %{buildroot}%{_infodir}
# Remove binaries we will not be including, so that they don't end up in
# gcc-debuginfo
rm -f %{buildroot}%{_libdir}/{libffi*,libiberty.a}
rm -f %{buildroot}%{_libexecdir}/gcc/*/%{gcc_version}/install-tools/{mkheaders,fixincl}
rm -f %{buildroot}%{_prefix}/bin/*-gcc-%{version} || :
rm -f %{buildroot}%{_bindir}/*-ar || :
rm -f %{buildroot}%{_bindir}/*-nm || :
rm -f %{buildroot}%{_bindir}/*-ranlib || :
rmdir %{buildroot}%{_includedir}
find %{buildroot}%{_datadir} -name gcc.mo |
while read x
do
y=`dirname $x`
mv $x $y/%{cross}-gcc.mo
done
%find_lang %{cross}-gcc
gzip %{buildroot}%{_mandir}/man1/*.1
rm %{buildroot}%{_mandir}/man7/*.7
rmdir %{buildroot}%{_mandir}/man7
# All the installed manual pages and translation files for each program are the
# same, so symlink them to the common package
cd %{buildroot}%{_mandir}/man1
for i in %{cross}-cpp.1.gz %{cross}-gcc.1.gz %{cross}-gcov.1.gz
do
j=${i#%{cross}-}
for k in *-$j
do
if [ $k != $i -a ! -L $k ]
then
mv $k $i
ln -s $i $k
fi
done
done
# Add manpages the additional symlink-only targets
%if %{build_powerpc}%{build_powerpc64}
for i in powerpc*
do
ln -s $i ppc${i#powerpc}
done
%endif
cd -
function install_lang () {
arch=$1
cpu=${arch%%%%-*}
(
echo '%%defattr(-,root,root,-)'
echo '%{_bindir}/'$arch'-*'
echo '%{_mandir}/man1/'$arch'-*'
case $cpu in
avr32) target_cpu=avr;;
bfin) target_cpu=bfin;;
h8300) target_cpu=h8300;;
mn10300) target_cpu=am33_2.0;;
openrisc) target_cpu=openrisc;;
parisc) target_cpu=hppa;;
score) target_cpu=score;;
tile) target_cpu=tilegx;;
v850) target_cpu=v850e;;
x86) target_cpu=x86_64;;
*) target_cpu=$cpu;;
esac
case $cpu in
ppc*|ppc64*)
;;
*)
echo '/usr/lib/gcc/'$target_cpu'-*/'
echo '%{_libexecdir}/gcc/'$target_cpu'-*/'
esac
) >files.$arch
}
for target in `cat target.list symlink-target.list`
do
install_lang $target
done
%define __ar_no_strip $RPM_BUILD_DIR/%{srcdir}/ar-no-strip
cat >%{__ar_no_strip} <<EOF
#!/bin/bash
f=\$2
if [ \${f##*/} = libgcc.a -o \${f##*/} = libgcov.a ]
then
:
else
%{__strip} \$*
fi
EOF
chmod +x %{__ar_no_strip}
%undefine __strip
%define __strip %{__ar_no_strip}
###############################################################################
#
# Cleanup
#
###############################################################################
%clean
rm -rf %{buildroot}
###############################################################################
#
# Filesets
#
###############################################################################
%files -n %{cross}-gcc-common -f %{cross}-gcc.lang
%doc %{srcdir}/COPYING*
%doc %{srcdir}/README
%{_mandir}/man1/%{cross}-*
%define do_files() \
%if %2 \
%files -n %{rpmprefix}gcc-%1 -f files.%1 \
%endif
%do_files alpha-linux-gnu %{build_alpha}
%do_files arm-linux-gnu %{build_arm}
%do_files aarch64-linux-gnu %{build_aarch64}
%do_files avr32-linux-gnu %{build_avr32}
%do_files bfin-linux-gnu %{build_blackfin}
%do_files c6x-linux-gnu %{build_c6x}
%do_files cris-linux-gnu %{build_cris}
%do_files frv-linux-gnu %{build_frv}
%do_files h8300-linux-gnu %{build_h8300}
%do_files hppa-linux-gnu %{build_hppa}
%do_files hppa64-linux-gnu %{build_hppa64}
%do_files i386-linux-gnu %{build_i386}
%do_files ia64-linux-gnu %{build_ia64}
%do_files m32r-linux-gnu %{build_m32r}
%do_files m68k-linux-gnu %{build_m68k}
%do_files microblaze-linux-gnu %{build_microblaze}
%do_files mips-linux-gnu %{build_mips}
%do_files mips64-linux-gnu %{build_mips64}
%do_files mn10300-linux-gnu %{build_mn10300}
%do_files openrisc-linux-gnu %{build_openrisc}
%do_files powerpc-linux-gnu %{build_powerpc}
%do_files powerpc64-linux-gnu %{build_powerpc64}
%do_files ppc-linux-gnu %{build_powerpc}
%do_files ppc64-linux-gnu %{build_powerpc64}
%do_files s390-linux-gnu %{build_s390}
%do_files s390x-linux-gnu %{build_s390x}
%do_files score-linux-gnu %{build_score}
%do_files sh-linux-gnu %{build_sh}
%do_files sh4-linux-gnu %{build_sh4}
%do_files sh64-linux-gnu %{build_sh64}
%do_files sparc-linux-gnu %{build_sparc}
%do_files sparc64-linux-gnu %{build_sparc64}
%do_files tile-linux-gnu %{build_tile}
%do_files unicore32-linux-gnu %{build_unicore32}
%do_files x86_64-linux-gnu %{build_x86_64}
%do_files xtensa-linux-gnu %{build_xtensa}
%changelog
* Tue Aug 13 2013 David Howells <dhowells@redhat.com> - 4.8.1-5.2
- Require binutils 2.23.88 or greater for 32-bit HPPA binutils.
* Mon Aug 12 2013 David Howells <dhowells@redhat.com> - 4.8.1-5.1
- Move to gcc-4.8.1.
- Enable cloog support.
* Wed Jun 5 2013 David Howells <dhowells@redhat.com> - 4.7.2-2.aa.20121114svn.2
- Use CONFIG_FLAGS and ditch COPT to avoid confusion.
- Backport cleanups from the RHEL-6.4 cross-compiler.
- Backport some macroisation from the RHEL-6.4 cross-compiler.
- Remove documentation build config as it we do not use it for gcc.
- The hppa64 target cannot actually build hppa, so provide hppa [BZ 892220].
- Provide ppc- and ppc64- rpms with symlinks to powerpc- and powerpc64- rpms.
* Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 4.7.2-2.aa.20121114svn.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
* Tue Nov 20 2012 David Howells <dhowells@redhat.com> - 4.7.2-2.aa.20121114
- Fixed the sh64 libgcc compilation.
* Thu Nov 15 2012 David Howells <dhowells@redhat.com> - 4.7.2-1.aa.20121114
- Move to the gcc-4.7-aarch64 SVN branch and add a compiler for the aarch64 arch.
- Disable sjlj exception support.
- Compile libgcc for certain platforms.
- Fix fuzz in sparc-config-detection patch.
* Mon Oct 15 2012 Jon Ciesla <limburgher@gmail.com> - 4.7.1-0.1.20120606.2
- Provides: bundled(libiberty)
* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 4.7.1-0.1.20120606.1
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Mon Jun 11 2012 David Howells <dhowells@redhat.com> - 4.7.1-0.1.20120606
- Update to gcc-4.7.1-RC-20120606 to fix an ICE in the MIPS compiler.
- The SH64 compilation patches are now redundant.
* Wed May 30 2012 David Howells <dhowells@redhat.com> - 4.7.0-1
- Update to gcc-4.7.0.
- Add patches to fix SH64 compilation.
- Build separate SH and SH64 compilers.
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 4.7.0-0.11.4
- Add missing BuildRequires
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 4.7.0-0.11.3
- Fix gcc47-ppl-0.10.patch fuzz.
* Thu Mar 22 2012 David Howells <dhowells@redhat.com> - 4.7.0-0.11.2
- Initial import of cross-binutils [BZ 766166].
* Mon Oct 31 2011 Rex Dieter <rdieter@fedoraproject.org> 4.6.2-1.fc17.1
- rebuild (gmp)