From da7e551daadfe32b0f386ffed41efc18a2150e3d Mon Sep 17 00:00:00 2001
From: "Richard W.M. Jones" <rjones@redhat.com>
Date: Tue, 5 Nov 2013 14:08:01 +0000
Subject: [PATCH] builder: Replace ubuntu-<NN>.sh with a single script.
Just use:
./ubuntu.sh 10.04 lucid
Note that you don't need to be root.
(cherry picked from commit 91b5e7fb37751719304573882c521071aa811e36)
---
builder/website/Makefile.am | 8 +-
builder/website/index | 21 +-
builder/website/index.asc | 49 ++---
builder/website/ubuntu-10.04.preseed | 376 -----------------------------------
builder/website/ubuntu-10.04.sh | 85 --------
builder/website/ubuntu-12.04.preseed | 376 -----------------------------------
builder/website/ubuntu-12.04.sh | 85 --------
builder/website/ubuntu-13.10.preseed | 376 -----------------------------------
builder/website/ubuntu-13.10.sh | 85 --------
builder/website/ubuntu.preseed | 376 +++++++++++++++++++++++++++++++++++
builder/website/ubuntu.sh | 84 ++++++++
11 files changed, 500 insertions(+), 1421 deletions(-)
delete mode 100644 builder/website/ubuntu-10.04.preseed
delete mode 100755 builder/website/ubuntu-10.04.sh
delete mode 100644 builder/website/ubuntu-12.04.preseed
delete mode 100755 builder/website/ubuntu-12.04.sh
delete mode 100644 builder/website/ubuntu-13.10.preseed
delete mode 100755 builder/website/ubuntu-13.10.sh
create mode 100644 builder/website/ubuntu.preseed
create mode 100755 builder/website/ubuntu.sh
diff --git a/builder/website/Makefile.am b/builder/website/Makefile.am
index 4188439..dfcb494 100644
--- a/builder/website/Makefile.am
+++ b/builder/website/Makefile.am
@@ -35,14 +35,10 @@ EXTRA_DIST = \
fedora.sh \
fedora-18.xz.sig \
fedora-19.xz.sig \
- ubuntu-10.04.preseed \
- ubuntu-10.04.sh \
+ ubuntu.preseed \
+ ubuntu.sh \
ubuntu-10.04.xz.sig \
- ubuntu-12.04.preseed \
- ubuntu-12.04.sh \
ubuntu-12.04.xz.sig \
- ubuntu-13.10.preseed \
- ubuntu-13.10.sh \
ubuntu-13.10.xz.sig
CLEANFILES = *~
diff --git a/builder/website/index b/builder/website/index
index bea11ce..4e6a867 100644
--- a/builder/website/index
+++ b/builder/website/index
@@ -141,9 +141,10 @@ notes=Ubuntu 10.04 (Lucid).
Only the openssh-server package is selected in tasksel.
The preseed and virt-install scripts that produced this image
- can be found in the libguestfs git tree:
- libguestfs.git/builder/website/ubuntu-10.04.preseed
- libguestfs.git/builder/website/ubuntu-10.04.sh
+ can be found in the libguestfs source tree:
+
+ builder/website/ubuntu.preseed
+ builder/website/ubuntu.sh
This image does not contain SSH host keys. To regenerate them use:
@@ -165,9 +166,10 @@ notes=Ubuntu 12.04 (Precise).
Only the openssh-server package is selected in tasksel.
The preseed and virt-install scripts that produced this image
- can be found in the libguestfs git tree:
- libguestfs.git/builder/website/ubuntu-12.04.preseed
- libguestfs.git/builder/website/ubuntu-12.04.sh
+ can be found in the libguestfs source tree:
+
+ builder/website/ubuntu.preseed
+ builder/website/ubuntu.sh
This image does not contain SSH host keys. To regenerate them use:
@@ -189,9 +191,10 @@ notes=Ubuntu 13.10 (Saucy).
Only the openssh-server package is selected in tasksel.
The preseed and virt-install scripts that produced this image
- can be found in the libguestfs git tree:
- libguestfs.git/builder/website/ubuntu-13.10.preseed
- libguestfs.git/builder/website/ubuntu-13.10.sh
+ can be found in the libguestfs source tree:
+
+ builder/website/ubuntu.preseed
+ builder/website/ubuntu.sh
This image does not contain SSH host keys. To regenerate them use:
diff --git a/builder/website/index.asc b/builder/website/index.asc
index c04cf1d..35e103c 100644
--- a/builder/website/index.asc
+++ b/builder/website/index.asc
@@ -121,7 +121,7 @@ notes=Fedora 19.
This Fedora image contains only unmodified @Core group packages.
It is thus very minimal. The kickstart and install script can be
- found in the libguestfs git tree:
+ found in the libguestfs source tree:
builder/website/fedora.sh
@@ -144,9 +144,10 @@ notes=Ubuntu 10.04 (Lucid).
Only the openssh-server package is selected in tasksel.
The preseed and virt-install scripts that produced this image
- can be found in the libguestfs git tree:
- libguestfs.git/builder/website/ubuntu-10.04.preseed
- libguestfs.git/builder/website/ubuntu-10.04.sh
+ can be found in the libguestfs source tree:
+
+ builder/website/ubuntu.preseed
+ builder/website/ubuntu.sh
This image does not contain SSH host keys. To regenerate them use:
@@ -168,9 +169,10 @@ notes=Ubuntu 12.04 (Precise).
Only the openssh-server package is selected in tasksel.
The preseed and virt-install scripts that produced this image
- can be found in the libguestfs git tree:
- libguestfs.git/builder/website/ubuntu-12.04.preseed
- libguestfs.git/builder/website/ubuntu-12.04.sh
+ can be found in the libguestfs source tree:
+
+ builder/website/ubuntu.preseed
+ builder/website/ubuntu.sh
This image does not contain SSH host keys. To regenerate them use:
@@ -192,9 +194,10 @@ notes=Ubuntu 13.10 (Saucy).
Only the openssh-server package is selected in tasksel.
The preseed and virt-install scripts that produced this image
- can be found in the libguestfs git tree:
- libguestfs.git/builder/website/ubuntu-13.10.preseed
- libguestfs.git/builder/website/ubuntu-13.10.sh
+ can be found in the libguestfs source tree:
+
+ builder/website/ubuntu.preseed
+ builder/website/ubuntu.sh
This image does not contain SSH host keys. To regenerate them use:
@@ -202,17 +205,17 @@ notes=Ubuntu 13.10 (Saucy).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
-iQIcBAEBAgAGBQJSePm7AAoJEJFzj3Pht2ig+fYP/RODYX3Y6Rfqgn5YcgOVbkEN
-5RNxNvE/cFba5w6eZzI2q/kdjH9JzHMqmevHwANNq8i37tmgrkFkGgZK7QD92xWS
-GF9QeaNh9usLi3gB9WRxsT5p017IUsns4lFhlPs6nXnuIqb3+7B/qYPQFqgW9QbO
-c3WYWhnHvxAAGvARnVirGs7ucyajjoqJA+P5yfnnxl8BPEk+1nuXowEH423czYq3
-E3dX5AUFy3mjfzK2DH12ladUYvxbur1p7eGKx7VkD1ZaqWtt+pss0+M7WO+tAt+w
-JkggdkBqY30T2zxchF8bRiObAFCXEpC7UmA50UPxXiVK94rXSr1jvAVHsh8nSjXA
-QfRcFA4JjnYRBqCiCu4Tp08MmfMKHFkCn/VtjUhugJHClkeR1GYkhUJ9pnu1goK/
-N3yNyW/kORgSgZFfmLvUcdAQIIyWTqvgXFkEe16FnWNmH1Aq8JbAH5l/Iw8Nk+bU
-gB9+kKdVyAH7j5+fasIuiw4N0dgiq4k3xktOgUMIt4I1mqpWEVJBGUWgcH/qx+FP
-nUoHXTDBLY6MZXAmtuV4TpvRPX85O5nSe6NnGsivaYVa7Dsqk5TUZhUpU46F2Sqv
-HsvhXO295LT7hPj2Cd++NAy1R+WV+eeldPwP+Ff9adOvB8uShHW+hVpSUVmeeIku
-LLd8N3ZnefviQj+p61It
-=qKVc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+=tYWz
-----END PGP SIGNATURE-----
diff --git a/builder/website/ubuntu-10.04.preseed b/builder/website/ubuntu-10.04.preseed
deleted file mode 100644
index 236e174..0000000
--- a/builder/website/ubuntu-10.04.preseed
+++ /dev/null
@@ -1,376 +0,0 @@
-#### Contents of the preconfiguration file (for &releasename;)
-### Localization
-# Locale sets language and country.
-d-i debian-installer/locale string en_US
-
-# Keyboard selection.
-# Disable automatic (interactive) keymap detection.
-d-i console-setup/ask_detect boolean false
-#d-i console-setup/modelcode string pc105
-d-i console-setup/layoutcode string us
-# To select a variant of the selected layout (if you leave this out, the
-# basic form of the layout will be used):
-#d-i console-setup/variantcode string dvorak
-
-### Network configuration
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_dhcp boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-# If non-free firmware is needed for the network or other hardware, you can
-# configure the installer to always try to load it, without prompting. Or
-# change to false to disable asking.
-#d-i hw-detect/load_firmware boolean true
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-#d-i mirror/country string manual
-#d-i mirror/http/hostname string http.us.debian.org
-#d-i mirror/http/directory string /ubuntu
-#d-i mirror/http/proxy string
-
-# Alternatively: by default, the installer uses CC.archive.ubuntu.com where
-# CC is the ISO-3166-2 code for the selected country. You can preseed this
-# so that it does so without asking.
-d-i mirror/http/mirror select uk.archive.ubuntu.com
-
-# Suite to install.
-#d-i mirror/suite string &releasename;
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string &releasename;
-# Components to use for loading installer components (optional).
-#d-i mirror/udeb/components multiselect main, restricted
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string US/Eastern
-
-# Controls whether to use NTP to set the clock during the install
-d-i clock-setup/ntp boolean true
-# NTP server to use. The default is almost always fine here.
-#d-i clock-setup/ntp-server string ntp.example.com
-
-### Partitioning
-# If the system has free space you can choose to only partition that space.
-# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
-#d-i partman-auto/init_automatically_partition select biggest_free
-
-# Alternatively, you can specify a disk to partition. The device name must
-# be given in traditional non-devfs format.
-# Note: A disk must be specified, unless the system has only one disk.
-# For example, to use the first SCSI/SATA hard disk:
-#d-i partman-auto/disk string /dev/sda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are: "regular", "lvm" and "crypto"
-d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-d-i partman-lvm/device_remove_lvm boolean true
-# The same applies to pre-existing software RAID array:
-d-i partman-md/device_remove_md boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-d-i partman-lvm/confirm boolean true
-
-# For LVM partitioning, you can select how much of the volume group to use
-# for logical volumes.
-#d-i partman-auto-lvm/guided_size string max
-#d-i partman-auto-lvm/guided_size string 10GB
-#d-i partman-auto-lvm/guided_size string 50%
-
-# You can choose one of the three predefined partitioning recipes:
-# - atomic: all files in one partition
-# - home: separate /home partition
-# - multi: separate /home, /usr, /var, and /tmp partitions
-d-i partman-auto/choose_recipe select atomic
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
-
-# If you just want to change the default filesystem from ext3 to something
-# else, you can do that without providing a full recipe.
-#d-i partman/default_filesystem string ext4
-
-# This makes partman automatically partition without confirmation, provided
-# that you told it what to do using one of the methods above.
-d-i partman/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-### Controlling how partitions are mounted
-# The default is to mount by UUID, but you can also choose "traditional" to
-# use traditional device names, or "label" to try filesystem labels before
-# falling back to UUIDs.
-#d-i partman/mount_style select uuid
-
-### Base system installation
-# The kernel image (meta) package to be installed; "none" can be used if no
-# kernel is to be installed.
-#d-i base-installer/kernel/image string linux-generic
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo). The default is false; preseed this to true if you want to set
-# a root password.
-#d-i passwd/root-login boolean false
-# Alternatively, to skip creation of a normal user account.
-d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-d-i passwd/root-password password builder
-d-i passwd/root-password-again password builder
-# or encrypted using an MD5 hash.
-#d-i passwd/root-password-crypted password [MD5 hash]
-
-# To create a normal user account.
-#d-i passwd/user-fullname string Ubuntu User
-#d-i passwd/username string ubuntu
-# Normal user's password, either in clear text
-#d-i passwd/user-password password insecure
-#d-i passwd/user-password-again password insecure
-# or encrypted using an MD5 hash.
-#d-i passwd/user-password-crypted password [MD5 hash]
-# Create the first user with the specified UID instead of the default.
-#d-i passwd/user-uid string 1010
-# The installer will warn about weak passwords. If you are sure you know
-# what you're doing and want to override it, uncomment this.
-#d-i user-setup/allow-password-weak boolean true
-
-# The user account will be added to some standard initial groups. To
-# override that, use this.
-#d-i passwd/user-default-groups string audio cdrom video
-
-# Set to true if you want to encrypt the first user's home directory.
-d-i user-setup/encrypt-home boolean false
-
-### Apt setup
-# You can choose to install restricted and universe software, or to install
-# software from the backports repository.
-#d-i apt-setup/restricted boolean true
-#d-i apt-setup/universe boolean true
-#d-i apt-setup/backports boolean true
-# Uncomment this if you don't want to use a network mirror.
-#d-i apt-setup/use_mirror boolean false
-# Select which update services to use; define the mirrors to be used.
-# Values shown below are the normal defaults.
-#d-i apt-setup/services-select multiselect security
-#d-i apt-setup/security_host string security.ubuntu.com
-#d-i apt-setup/security_path string /ubuntu
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# http://local.server/ubuntu &releasename; main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated string true
-
-### Package selection
-#tasksel tasksel/first multiselect ubuntu-desktop
-#tasksel tasksel/first multiselect lamp-server, print-server
-#tasksel tasksel/first multiselect kubuntu-desktop
-tasksel tasksel/first multiselect openssh-server
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-# Whether to upgrade packages after debootstrap.
-# Allowed values: none, safe-upgrade, full-upgrade
-#d-i pkgsel/upgrade select none
-
-# Language pack selection
-#d-i pkgsel/language-packs multiselect de, en, zh
-
-# Policy for applying updates. May be "none" (no automatic updates),
-# "unattended-upgrades" (install security updates automatically), or
-# "landscape" (manage system with Landscape).
-#d-i pkgsel/update-policy select none
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
-# popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
-
-# By default, the system's locate database will be updated after the
-# installer has finished installing most packages. This may take a while, so
-# if you don't want it, you can set this to "false" to turn it off.
-#d-i pkgsel/updatedb boolean true
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-# To also skip installing lilo, and install no bootloader, uncomment this
-# too:
-#d-i lilo-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev string (hd0,0)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
-
-# Optional password for grub, either in clear text
-#d-i grub-installer/password password r00tme
-#d-i grub-installer/password-again password r00tme
-# or encrypted using an MD5 hash, see grub-md5-crypt(8).
-#d-i grub-installer/password-crypted password [MD5 hash]
-
-### Finishing up the installation
-# During installations from serial console, the regular virtual consoles
-# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
-# line to prevent this.
-#d-i finish-install/keep-consoles boolean true
-
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-# This is how to make the installer shutdown when finished, but not
-# reboot into the installed system.
-#d-i debian-installer/exit/halt boolean true
-# This will power off the machine instead of just halting it.
-#d-i debian-installer/exit/poweroff boolean true
-
-### X configuration
-# X can detect the right driver for some cards, but if you're preseeding,
-# you override whatever it chooses. Still, vesa will work most places.
-#xserver-xorg xserver-xorg/config/device/driver select vesa
-
-# A caveat with mouse autodetection is that if it fails, X will retry it
-# over and over. So if it's preseeded to be done, there is a possibility of
-# an infinite loop if the mouse is not autodetected.
-#xserver-xorg xserver-xorg/autodetect_mouse boolean true
-
-# Monitor autodetection is recommended.
-xserver-xorg xserver-xorg/autodetect_monitor boolean true
-# Uncomment if you have an LCD display.
-#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
-# X has three configuration paths for the monitor. Here's how to preseed
-# the "medium" path, which is always available. The "simple" path may not
-# be available, and the "advanced" path asks too many questions.
-xserver-xorg xserver-xorg/config/monitor/selection-method \
- select medium
-xserver-xorg xserver-xorg/config/monitor/mode-list \
- select 1024x768 @ 60 Hz
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-
-# This command is run immediately before the partitioner starts. It may be
-# useful to apply dynamic partitioner preseeding that depends on the state
-# of the disks (which may not be visible when preseed/early_command runs).
-#d-i partman/early_command string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
-
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-
diff --git a/builder/website/ubuntu-10.04.sh b/builder/website/ubuntu-10.04.sh
deleted file mode 100755
index 943a96a..0000000
--- a/builder/website/ubuntu-10.04.sh
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/bin/bash -
-# libguestfs
-# Copyright (C) 2013 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-# The basic plan comes from:
-# http://honk.sigxcpu.org/con/Preseeding_Debian_virtual_machines_with_virt_install.html
-# https://wiki.debian.org/DebianInstaller/Preseed
-# https://help.ubuntu.com/10.04/installation-guide/i386/preseed-using.html
-
-set -e
-set -x
-
-# Some configuration.
-#export http_proxy=http://squid.corp.redhat.com:3128
-#export https_proxy=$http_proxy
-#export ftp_proxy=$http_proxy
-location=http://archive.ubuntu.net/ubuntu/dists/lucid/main/installer-amd64
-
-# Currently you have to run this script as root.
-if [ `id -u` -ne 0 ]; then
- echo "You have to run this script as root."
- exit 1
-fi
-
-# Make sure it's being run from the correct directory.
-if [ ! -f ubuntu-10.04.preseed ]; then
- echo "You are running this script from the wrong directory."
- exit 1
-fi
-
-pwd=`pwd`
-
-# Note that the injected file must be called "/preseed.cfg" in order
-# for d-i to pick it up.
-sed -e "s,@CACHE@,$http_proxy,g" < ubuntu-10.04.preseed > preseed.cfg
-
-name=tmplucid
-
-virsh undefine $name ||:
-rm -f ubuntu-10.04 ubuntu-10.04.old
-
-virt-install \
- --name $name \
- --ram=1024 \
- --os-type=linux --os-variant=ubuntulucid \
- --initrd-inject=$pwd/preseed.cfg \
- --extra-args="auto console=tty0 console=ttyS0,115200" \
- --disk=$pwd/ubuntu-10.04,size=4 \
- --location=$location \
- --nographics \
- --noreboot
-# The virt-install command should exit after complete installation.
-# Remove the guest, we don't want it to be defined in libvirt.
-virsh undefine $name
-
-rm preseed.cfg
-
-# Sysprep (removes logfiles and so on).
-virt-sysprep -a ubuntu-10.04
-
-# Sparsify.
-mv ubuntu-10.04 ubuntu-10.04.old
-virt-sparsify ubuntu-10.04.old ubuntu-10.04
-rm ubuntu-10.04.old
-
-# Compress.
-rm -f ubuntu-10.04.xz
-xz --best --block-size=16777216 ubuntu-10.04
-
-# Result:
-ls -lh ubuntu-10.04.xz
diff --git a/builder/website/ubuntu-12.04.preseed b/builder/website/ubuntu-12.04.preseed
deleted file mode 100644
index 236e174..0000000
--- a/builder/website/ubuntu-12.04.preseed
+++ /dev/null
@@ -1,376 +0,0 @@
-#### Contents of the preconfiguration file (for &releasename;)
-### Localization
-# Locale sets language and country.
-d-i debian-installer/locale string en_US
-
-# Keyboard selection.
-# Disable automatic (interactive) keymap detection.
-d-i console-setup/ask_detect boolean false
-#d-i console-setup/modelcode string pc105
-d-i console-setup/layoutcode string us
-# To select a variant of the selected layout (if you leave this out, the
-# basic form of the layout will be used):
-#d-i console-setup/variantcode string dvorak
-
-### Network configuration
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_dhcp boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-# If non-free firmware is needed for the network or other hardware, you can
-# configure the installer to always try to load it, without prompting. Or
-# change to false to disable asking.
-#d-i hw-detect/load_firmware boolean true
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-#d-i mirror/country string manual
-#d-i mirror/http/hostname string http.us.debian.org
-#d-i mirror/http/directory string /ubuntu
-#d-i mirror/http/proxy string
-
-# Alternatively: by default, the installer uses CC.archive.ubuntu.com where
-# CC is the ISO-3166-2 code for the selected country. You can preseed this
-# so that it does so without asking.
-d-i mirror/http/mirror select uk.archive.ubuntu.com
-
-# Suite to install.
-#d-i mirror/suite string &releasename;
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string &releasename;
-# Components to use for loading installer components (optional).
-#d-i mirror/udeb/components multiselect main, restricted
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string US/Eastern
-
-# Controls whether to use NTP to set the clock during the install
-d-i clock-setup/ntp boolean true
-# NTP server to use. The default is almost always fine here.
-#d-i clock-setup/ntp-server string ntp.example.com
-
-### Partitioning
-# If the system has free space you can choose to only partition that space.
-# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
-#d-i partman-auto/init_automatically_partition select biggest_free
-
-# Alternatively, you can specify a disk to partition. The device name must
-# be given in traditional non-devfs format.
-# Note: A disk must be specified, unless the system has only one disk.
-# For example, to use the first SCSI/SATA hard disk:
-#d-i partman-auto/disk string /dev/sda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are: "regular", "lvm" and "crypto"
-d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-d-i partman-lvm/device_remove_lvm boolean true
-# The same applies to pre-existing software RAID array:
-d-i partman-md/device_remove_md boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-d-i partman-lvm/confirm boolean true
-
-# For LVM partitioning, you can select how much of the volume group to use
-# for logical volumes.
-#d-i partman-auto-lvm/guided_size string max
-#d-i partman-auto-lvm/guided_size string 10GB
-#d-i partman-auto-lvm/guided_size string 50%
-
-# You can choose one of the three predefined partitioning recipes:
-# - atomic: all files in one partition
-# - home: separate /home partition
-# - multi: separate /home, /usr, /var, and /tmp partitions
-d-i partman-auto/choose_recipe select atomic
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
-
-# If you just want to change the default filesystem from ext3 to something
-# else, you can do that without providing a full recipe.
-#d-i partman/default_filesystem string ext4
-
-# This makes partman automatically partition without confirmation, provided
-# that you told it what to do using one of the methods above.
-d-i partman/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-### Controlling how partitions are mounted
-# The default is to mount by UUID, but you can also choose "traditional" to
-# use traditional device names, or "label" to try filesystem labels before
-# falling back to UUIDs.
-#d-i partman/mount_style select uuid
-
-### Base system installation
-# The kernel image (meta) package to be installed; "none" can be used if no
-# kernel is to be installed.
-#d-i base-installer/kernel/image string linux-generic
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo). The default is false; preseed this to true if you want to set
-# a root password.
-#d-i passwd/root-login boolean false
-# Alternatively, to skip creation of a normal user account.
-d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-d-i passwd/root-password password builder
-d-i passwd/root-password-again password builder
-# or encrypted using an MD5 hash.
-#d-i passwd/root-password-crypted password [MD5 hash]
-
-# To create a normal user account.
-#d-i passwd/user-fullname string Ubuntu User
-#d-i passwd/username string ubuntu
-# Normal user's password, either in clear text
-#d-i passwd/user-password password insecure
-#d-i passwd/user-password-again password insecure
-# or encrypted using an MD5 hash.
-#d-i passwd/user-password-crypted password [MD5 hash]
-# Create the first user with the specified UID instead of the default.
-#d-i passwd/user-uid string 1010
-# The installer will warn about weak passwords. If you are sure you know
-# what you're doing and want to override it, uncomment this.
-#d-i user-setup/allow-password-weak boolean true
-
-# The user account will be added to some standard initial groups. To
-# override that, use this.
-#d-i passwd/user-default-groups string audio cdrom video
-
-# Set to true if you want to encrypt the first user's home directory.
-d-i user-setup/encrypt-home boolean false
-
-### Apt setup
-# You can choose to install restricted and universe software, or to install
-# software from the backports repository.
-#d-i apt-setup/restricted boolean true
-#d-i apt-setup/universe boolean true
-#d-i apt-setup/backports boolean true
-# Uncomment this if you don't want to use a network mirror.
-#d-i apt-setup/use_mirror boolean false
-# Select which update services to use; define the mirrors to be used.
-# Values shown below are the normal defaults.
-#d-i apt-setup/services-select multiselect security
-#d-i apt-setup/security_host string security.ubuntu.com
-#d-i apt-setup/security_path string /ubuntu
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# http://local.server/ubuntu &releasename; main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated string true
-
-### Package selection
-#tasksel tasksel/first multiselect ubuntu-desktop
-#tasksel tasksel/first multiselect lamp-server, print-server
-#tasksel tasksel/first multiselect kubuntu-desktop
-tasksel tasksel/first multiselect openssh-server
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-# Whether to upgrade packages after debootstrap.
-# Allowed values: none, safe-upgrade, full-upgrade
-#d-i pkgsel/upgrade select none
-
-# Language pack selection
-#d-i pkgsel/language-packs multiselect de, en, zh
-
-# Policy for applying updates. May be "none" (no automatic updates),
-# "unattended-upgrades" (install security updates automatically), or
-# "landscape" (manage system with Landscape).
-#d-i pkgsel/update-policy select none
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
-# popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
-
-# By default, the system's locate database will be updated after the
-# installer has finished installing most packages. This may take a while, so
-# if you don't want it, you can set this to "false" to turn it off.
-#d-i pkgsel/updatedb boolean true
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-# To also skip installing lilo, and install no bootloader, uncomment this
-# too:
-#d-i lilo-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev string (hd0,0)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
-
-# Optional password for grub, either in clear text
-#d-i grub-installer/password password r00tme
-#d-i grub-installer/password-again password r00tme
-# or encrypted using an MD5 hash, see grub-md5-crypt(8).
-#d-i grub-installer/password-crypted password [MD5 hash]
-
-### Finishing up the installation
-# During installations from serial console, the regular virtual consoles
-# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
-# line to prevent this.
-#d-i finish-install/keep-consoles boolean true
-
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-# This is how to make the installer shutdown when finished, but not
-# reboot into the installed system.
-#d-i debian-installer/exit/halt boolean true
-# This will power off the machine instead of just halting it.
-#d-i debian-installer/exit/poweroff boolean true
-
-### X configuration
-# X can detect the right driver for some cards, but if you're preseeding,
-# you override whatever it chooses. Still, vesa will work most places.
-#xserver-xorg xserver-xorg/config/device/driver select vesa
-
-# A caveat with mouse autodetection is that if it fails, X will retry it
-# over and over. So if it's preseeded to be done, there is a possibility of
-# an infinite loop if the mouse is not autodetected.
-#xserver-xorg xserver-xorg/autodetect_mouse boolean true
-
-# Monitor autodetection is recommended.
-xserver-xorg xserver-xorg/autodetect_monitor boolean true
-# Uncomment if you have an LCD display.
-#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
-# X has three configuration paths for the monitor. Here's how to preseed
-# the "medium" path, which is always available. The "simple" path may not
-# be available, and the "advanced" path asks too many questions.
-xserver-xorg xserver-xorg/config/monitor/selection-method \
- select medium
-xserver-xorg xserver-xorg/config/monitor/mode-list \
- select 1024x768 @ 60 Hz
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-
-# This command is run immediately before the partitioner starts. It may be
-# useful to apply dynamic partitioner preseeding that depends on the state
-# of the disks (which may not be visible when preseed/early_command runs).
-#d-i partman/early_command string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
-
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-
diff --git a/builder/website/ubuntu-12.04.sh b/builder/website/ubuntu-12.04.sh
deleted file mode 100755
index 6134b1d..0000000
--- a/builder/website/ubuntu-12.04.sh
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/bin/bash -
-# libguestfs
-# Copyright (C) 2013 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-# The basic plan comes from:
-# http://honk.sigxcpu.org/con/Preseeding_Debian_virtual_machines_with_virt_install.html
-# https://wiki.debian.org/DebianInstaller/Preseed
-# https://help.ubuntu.com/10.04/installation-guide/i386/preseed-using.html
-
-set -e
-set -x
-
-# Some configuration.
-#export http_proxy=http://squid.corp.redhat.com:3128
-#export https_proxy=$http_proxy
-#export ftp_proxy=$http_proxy
-location=http://archive.ubuntu.net/ubuntu/dists/precise/main/installer-amd64
-
-# Currently you have to run this script as root.
-if [ `id -u` -ne 0 ]; then
- echo "You have to run this script as root."
- exit 1
-fi
-
-# Make sure it's being run from the correct directory.
-if [ ! -f ubuntu-12.04.preseed ]; then
- echo "You are running this script from the wrong directory."
- exit 1
-fi
-
-pwd=`pwd`
-
-# Note that the injected file must be called "/preseed.cfg" in order
-# for d-i to pick it up.
-sed -e "s,@CACHE@,$http_proxy,g" < ubuntu-12.04.preseed > preseed.cfg
-
-name=tmpprecise
-
-virsh undefine $name ||:
-rm -f ubuntu-12.04 ubuntu-12.04.old
-
-virt-install \
- --name $name \
- --ram=1024 \
- --os-type=linux --os-variant=ubuntuprecise \
- --initrd-inject=$pwd/preseed.cfg \
- --extra-args="auto console=tty0 console=ttyS0,115200" \
- --disk=$pwd/ubuntu-12.04,size=4 \
- --location=$location \
- --nographics \
- --noreboot
-# The virt-install command should exit after complete installation.
-# Remove the guest, we don't want it to be defined in libvirt.
-virsh undefine $name
-
-rm preseed.cfg
-
-# Sysprep (removes logfiles and so on).
-virt-sysprep -a ubuntu-12.04
-
-# Sparsify.
-mv ubuntu-12.04 ubuntu-12.04.old
-virt-sparsify ubuntu-12.04.old ubuntu-12.04
-rm ubuntu-12.04.old
-
-# Compress.
-rm -f ubuntu-12.04.xz
-xz --best --block-size=16777216 ubuntu-12.04
-
-# Result:
-ls -lh ubuntu-12.04.xz
diff --git a/builder/website/ubuntu-13.10.preseed b/builder/website/ubuntu-13.10.preseed
deleted file mode 100644
index 236e174..0000000
--- a/builder/website/ubuntu-13.10.preseed
+++ /dev/null
@@ -1,376 +0,0 @@
-#### Contents of the preconfiguration file (for &releasename;)
-### Localization
-# Locale sets language and country.
-d-i debian-installer/locale string en_US
-
-# Keyboard selection.
-# Disable automatic (interactive) keymap detection.
-d-i console-setup/ask_detect boolean false
-#d-i console-setup/modelcode string pc105
-d-i console-setup/layoutcode string us
-# To select a variant of the selected layout (if you leave this out, the
-# basic form of the layout will be used):
-#d-i console-setup/variantcode string dvorak
-
-### Network configuration
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_dhcp boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-# If non-free firmware is needed for the network or other hardware, you can
-# configure the installer to always try to load it, without prompting. Or
-# change to false to disable asking.
-#d-i hw-detect/load_firmware boolean true
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-#d-i mirror/country string manual
-#d-i mirror/http/hostname string http.us.debian.org
-#d-i mirror/http/directory string /ubuntu
-#d-i mirror/http/proxy string
-
-# Alternatively: by default, the installer uses CC.archive.ubuntu.com where
-# CC is the ISO-3166-2 code for the selected country. You can preseed this
-# so that it does so without asking.
-d-i mirror/http/mirror select uk.archive.ubuntu.com
-
-# Suite to install.
-#d-i mirror/suite string &releasename;
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string &releasename;
-# Components to use for loading installer components (optional).
-#d-i mirror/udeb/components multiselect main, restricted
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string US/Eastern
-
-# Controls whether to use NTP to set the clock during the install
-d-i clock-setup/ntp boolean true
-# NTP server to use. The default is almost always fine here.
-#d-i clock-setup/ntp-server string ntp.example.com
-
-### Partitioning
-# If the system has free space you can choose to only partition that space.
-# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
-#d-i partman-auto/init_automatically_partition select biggest_free
-
-# Alternatively, you can specify a disk to partition. The device name must
-# be given in traditional non-devfs format.
-# Note: A disk must be specified, unless the system has only one disk.
-# For example, to use the first SCSI/SATA hard disk:
-#d-i partman-auto/disk string /dev/sda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are: "regular", "lvm" and "crypto"
-d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-d-i partman-lvm/device_remove_lvm boolean true
-# The same applies to pre-existing software RAID array:
-d-i partman-md/device_remove_md boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-d-i partman-lvm/confirm boolean true
-
-# For LVM partitioning, you can select how much of the volume group to use
-# for logical volumes.
-#d-i partman-auto-lvm/guided_size string max
-#d-i partman-auto-lvm/guided_size string 10GB
-#d-i partman-auto-lvm/guided_size string 50%
-
-# You can choose one of the three predefined partitioning recipes:
-# - atomic: all files in one partition
-# - home: separate /home partition
-# - multi: separate /home, /usr, /var, and /tmp partitions
-d-i partman-auto/choose_recipe select atomic
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
-
-# If you just want to change the default filesystem from ext3 to something
-# else, you can do that without providing a full recipe.
-#d-i partman/default_filesystem string ext4
-
-# This makes partman automatically partition without confirmation, provided
-# that you told it what to do using one of the methods above.
-d-i partman/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-### Controlling how partitions are mounted
-# The default is to mount by UUID, but you can also choose "traditional" to
-# use traditional device names, or "label" to try filesystem labels before
-# falling back to UUIDs.
-#d-i partman/mount_style select uuid
-
-### Base system installation
-# The kernel image (meta) package to be installed; "none" can be used if no
-# kernel is to be installed.
-#d-i base-installer/kernel/image string linux-generic
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo). The default is false; preseed this to true if you want to set
-# a root password.
-#d-i passwd/root-login boolean false
-# Alternatively, to skip creation of a normal user account.
-d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-d-i passwd/root-password password builder
-d-i passwd/root-password-again password builder
-# or encrypted using an MD5 hash.
-#d-i passwd/root-password-crypted password [MD5 hash]
-
-# To create a normal user account.
-#d-i passwd/user-fullname string Ubuntu User
-#d-i passwd/username string ubuntu
-# Normal user's password, either in clear text
-#d-i passwd/user-password password insecure
-#d-i passwd/user-password-again password insecure
-# or encrypted using an MD5 hash.
-#d-i passwd/user-password-crypted password [MD5 hash]
-# Create the first user with the specified UID instead of the default.
-#d-i passwd/user-uid string 1010
-# The installer will warn about weak passwords. If you are sure you know
-# what you're doing and want to override it, uncomment this.
-#d-i user-setup/allow-password-weak boolean true
-
-# The user account will be added to some standard initial groups. To
-# override that, use this.
-#d-i passwd/user-default-groups string audio cdrom video
-
-# Set to true if you want to encrypt the first user's home directory.
-d-i user-setup/encrypt-home boolean false
-
-### Apt setup
-# You can choose to install restricted and universe software, or to install
-# software from the backports repository.
-#d-i apt-setup/restricted boolean true
-#d-i apt-setup/universe boolean true
-#d-i apt-setup/backports boolean true
-# Uncomment this if you don't want to use a network mirror.
-#d-i apt-setup/use_mirror boolean false
-# Select which update services to use; define the mirrors to be used.
-# Values shown below are the normal defaults.
-#d-i apt-setup/services-select multiselect security
-#d-i apt-setup/security_host string security.ubuntu.com
-#d-i apt-setup/security_path string /ubuntu
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# http://local.server/ubuntu &releasename; main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated string true
-
-### Package selection
-#tasksel tasksel/first multiselect ubuntu-desktop
-#tasksel tasksel/first multiselect lamp-server, print-server
-#tasksel tasksel/first multiselect kubuntu-desktop
-tasksel tasksel/first multiselect openssh-server
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-# Whether to upgrade packages after debootstrap.
-# Allowed values: none, safe-upgrade, full-upgrade
-#d-i pkgsel/upgrade select none
-
-# Language pack selection
-#d-i pkgsel/language-packs multiselect de, en, zh
-
-# Policy for applying updates. May be "none" (no automatic updates),
-# "unattended-upgrades" (install security updates automatically), or
-# "landscape" (manage system with Landscape).
-#d-i pkgsel/update-policy select none
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
-# popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
-
-# By default, the system's locate database will be updated after the
-# installer has finished installing most packages. This may take a while, so
-# if you don't want it, you can set this to "false" to turn it off.
-#d-i pkgsel/updatedb boolean true
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-# To also skip installing lilo, and install no bootloader, uncomment this
-# too:
-#d-i lilo-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev string (hd0,0)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
-
-# Optional password for grub, either in clear text
-#d-i grub-installer/password password r00tme
-#d-i grub-installer/password-again password r00tme
-# or encrypted using an MD5 hash, see grub-md5-crypt(8).
-#d-i grub-installer/password-crypted password [MD5 hash]
-
-### Finishing up the installation
-# During installations from serial console, the regular virtual consoles
-# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
-# line to prevent this.
-#d-i finish-install/keep-consoles boolean true
-
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-# This is how to make the installer shutdown when finished, but not
-# reboot into the installed system.
-#d-i debian-installer/exit/halt boolean true
-# This will power off the machine instead of just halting it.
-#d-i debian-installer/exit/poweroff boolean true
-
-### X configuration
-# X can detect the right driver for some cards, but if you're preseeding,
-# you override whatever it chooses. Still, vesa will work most places.
-#xserver-xorg xserver-xorg/config/device/driver select vesa
-
-# A caveat with mouse autodetection is that if it fails, X will retry it
-# over and over. So if it's preseeded to be done, there is a possibility of
-# an infinite loop if the mouse is not autodetected.
-#xserver-xorg xserver-xorg/autodetect_mouse boolean true
-
-# Monitor autodetection is recommended.
-xserver-xorg xserver-xorg/autodetect_monitor boolean true
-# Uncomment if you have an LCD display.
-#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
-# X has three configuration paths for the monitor. Here's how to preseed
-# the "medium" path, which is always available. The "simple" path may not
-# be available, and the "advanced" path asks too many questions.
-xserver-xorg xserver-xorg/config/monitor/selection-method \
- select medium
-xserver-xorg xserver-xorg/config/monitor/mode-list \
- select 1024x768 @ 60 Hz
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-
-# This command is run immediately before the partitioner starts. It may be
-# useful to apply dynamic partitioner preseeding that depends on the state
-# of the disks (which may not be visible when preseed/early_command runs).
-#d-i partman/early_command string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
-
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-
diff --git a/builder/website/ubuntu-13.10.sh b/builder/website/ubuntu-13.10.sh
deleted file mode 100755
index 7373176..0000000
--- a/builder/website/ubuntu-13.10.sh
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/bin/bash -
-# libguestfs
-# Copyright (C) 2013 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-# The basic plan comes from:
-# http://honk.sigxcpu.org/con/Preseeding_Debian_virtual_machines_with_virt_install.html
-# https://wiki.debian.org/DebianInstaller/Preseed
-# https://help.ubuntu.com/10.04/installation-guide/i386/preseed-using.html
-
-set -e
-set -x
-
-# Some configuration.
-#export http_proxy=http://squid.corp.redhat.com:3128
-#export https_proxy=$http_proxy
-#export ftp_proxy=$http_proxy
-location=http://archive.ubuntu.net/ubuntu/dists/saucy/main/installer-amd64
-
-# Currently you have to run this script as root.
-if [ `id -u` -ne 0 ]; then
- echo "You have to run this script as root."
- exit 1
-fi
-
-# Make sure it's being run from the correct directory.
-if [ ! -f ubuntu-13.10.preseed ]; then
- echo "You are running this script from the wrong directory."
- exit 1
-fi
-
-pwd=`pwd`
-
-# Note that the injected file must be called "/preseed.cfg" in order
-# for d-i to pick it up.
-sed -e "s,@CACHE@,$http_proxy,g" < ubuntu-13.10.preseed > preseed.cfg
-
-name=tmpsaucy
-
-virsh undefine $name ||:
-rm -f ubuntu-13.10 ubuntu-13.10.old
-
-virt-install \
- --name $name \
- --ram=1024 \
- --os-type=linux --os-variant=ubuntusaucy \
- --initrd-inject=$pwd/preseed.cfg \
- --extra-args="auto console=tty0 console=ttyS0,115200" \
- --disk=$pwd/ubuntu-13.10,size=4 \
- --location=$location \
- --nographics \
- --noreboot
-# The virt-install command should exit after complete installation.
-# Remove the guest, we don't want it to be defined in libvirt.
-virsh undefine $name
-
-rm preseed.cfg
-
-# Sysprep (removes logfiles and so on).
-virt-sysprep -a ubuntu-13.10
-
-# Sparsify.
-mv ubuntu-13.10 ubuntu-13.10.old
-virt-sparsify ubuntu-13.10.old ubuntu-13.10
-rm ubuntu-13.10.old
-
-# Compress.
-rm -f ubuntu-13.10.xz
-xz --best --block-size=16777216 ubuntu-13.10
-
-# Result:
-ls -lh ubuntu-13.10.xz
diff --git a/builder/website/ubuntu.preseed b/builder/website/ubuntu.preseed
new file mode 100644
index 0000000..236e174
--- /dev/null
+++ b/builder/website/ubuntu.preseed
@@ -0,0 +1,376 @@
+#### Contents of the preconfiguration file (for &releasename;)
+### Localization
+# Locale sets language and country.
+d-i debian-installer/locale string en_US
+
+# Keyboard selection.
+# Disable automatic (interactive) keymap detection.
+d-i console-setup/ask_detect boolean false
+#d-i console-setup/modelcode string pc105
+d-i console-setup/layoutcode string us
+# To select a variant of the selected layout (if you leave this out, the
+# basic form of the layout will be used):
+#d-i console-setup/variantcode string dvorak
+
+### Network configuration
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string unassigned-hostname
+d-i netcfg/get_domain string unassigned-domain
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+#d-i mirror/country string manual
+#d-i mirror/http/hostname string http.us.debian.org
+#d-i mirror/http/directory string /ubuntu
+#d-i mirror/http/proxy string
+
+# Alternatively: by default, the installer uses CC.archive.ubuntu.com where
+# CC is the ISO-3166-2 code for the selected country. You can preseed this
+# so that it does so without asking.
+d-i mirror/http/mirror select uk.archive.ubuntu.com
+
+# Suite to install.
+#d-i mirror/suite string &releasename;
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string &releasename;
+# Components to use for loading installer components (optional).
+#d-i mirror/udeb/components multiselect main, restricted
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Eastern
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+# If the system has free space you can choose to only partition that space.
+# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you can specify a disk to partition. The device name must
+# be given in traditional non-devfs format.
+# Note: A disk must be specified, unless the system has only one disk.
+# For example, to use the first SCSI/SATA hard disk:
+#d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are: "regular", "lvm" and "crypto"
+d-i partman-auto/method string regular
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+
+# For LVM partitioning, you can select how much of the volume group to use
+# for logical volumes.
+#d-i partman-auto-lvm/guided_size string max
+#d-i partman-auto-lvm/guided_size string 10GB
+#d-i partman-auto-lvm/guided_size string 50%
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home: separate /home partition
+# - multi: separate /home, /usr, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# The recipe format is documented in the file devel/partman-auto-recipe.txt.
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string \
+# boot-root :: \
+# 40 50 100 ext3 \
+# $primary{ } $bootable{ } \
+# method{ format } format{ } \
+# use_filesystem{ } filesystem{ ext3 } \
+# mountpoint{ /boot } \
+# . \
+# 500 10000 1000000000 ext3 \
+# method{ format } format{ } \
+# use_filesystem{ } filesystem{ ext3 } \
+# mountpoint{ / } \
+# . \
+# 64 512 300% linux-swap \
+# method{ swap } format{ } \
+# .
+
+# If you just want to change the default filesystem from ext3 to something
+# else, you can do that without providing a full recipe.
+#d-i partman/default_filesystem string ext4
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+### Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-generic
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo). The default is false; preseed this to true if you want to set
+# a root password.
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+d-i passwd/root-password password builder
+d-i passwd/root-password-again password builder
+# or encrypted using an MD5 hash.
+#d-i passwd/root-password-crypted password [MD5 hash]
+
+# To create a normal user account.
+#d-i passwd/user-fullname string Ubuntu User
+#d-i passwd/username string ubuntu
+# Normal user's password, either in clear text
+#d-i passwd/user-password password insecure
+#d-i passwd/user-password-again password insecure
+# or encrypted using an MD5 hash.
+#d-i passwd/user-password-crypted password [MD5 hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+# The installer will warn about weak passwords. If you are sure you know
+# what you're doing and want to override it, uncomment this.
+#d-i user-setup/allow-password-weak boolean true
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+# Set to true if you want to encrypt the first user's home directory.
+d-i user-setup/encrypt-home boolean false
+
+### Apt setup
+# You can choose to install restricted and universe software, or to install
+# software from the backports repository.
+#d-i apt-setup/restricted boolean true
+#d-i apt-setup/universe boolean true
+#d-i apt-setup/backports boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security
+#d-i apt-setup/security_host string security.ubuntu.com
+#d-i apt-setup/security_path string /ubuntu
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+# http://local.server/ubuntu &releasename; main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string http://local.server/key
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated string true
+
+### Package selection
+#tasksel tasksel/first multiselect ubuntu-desktop
+#tasksel tasksel/first multiselect lamp-server, print-server
+#tasksel tasksel/first multiselect kubuntu-desktop
+tasksel tasksel/first multiselect openssh-server
+
+# Individual additional packages to install
+#d-i pkgsel/include string openssh-server build-essential
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Language pack selection
+#d-i pkgsel/language-packs multiselect de, en, zh
+
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+#d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+# By default, the system's locate database will be updated after the
+# installer has finished installing most packages. This may take a while, so
+# if you don't want it, you can set this to "false" to turn it off.
+#d-i pkgsel/updatedb boolean true
+
+### Boot loader installation
+# Grub is the default boot loader (for x86). If you want lilo installed
+# instead, uncomment this:
+#d-i grub-installer/skip boolean true
+# To also skip installing lilo, and install no bootloader, uncomment this
+# too:
+#d-i lilo-installer/skip boolean true
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# This one makes grub-installer install to the MBR if it also finds some other
+# OS, which is less safe as it might not be able to boot that other OS.
+d-i grub-installer/with_other_os boolean true
+
+# Alternatively, if you want to install to a location other than the mbr,
+# uncomment and edit these lines:
+#d-i grub-installer/only_debian boolean false
+#d-i grub-installer/with_other_os boolean false
+#d-i grub-installer/bootdev string (hd0,0)
+# To install grub to multiple disks:
+#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
+
+# Optional password for grub, either in clear text
+#d-i grub-installer/password password r00tme
+#d-i grub-installer/password-again password r00tme
+# or encrypted using an MD5 hash, see grub-md5-crypt(8).
+#d-i grub-installer/password-crypted password [MD5 hash]
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+#d-i debian-installer/exit/poweroff boolean true
+
+### X configuration
+# X can detect the right driver for some cards, but if you're preseeding,
+# you override whatever it chooses. Still, vesa will work most places.
+#xserver-xorg xserver-xorg/config/device/driver select vesa
+
+# A caveat with mouse autodetection is that if it fails, X will retry it
+# over and over. So if it's preseeded to be done, there is a possibility of
+# an infinite loop if the mouse is not autodetected.
+#xserver-xorg xserver-xorg/autodetect_mouse boolean true
+
+# Monitor autodetection is recommended.
+xserver-xorg xserver-xorg/autodetect_monitor boolean true
+# Uncomment if you have an LCD display.
+#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
+# X has three configuration paths for the monitor. Here's how to preseed
+# the "medium" path, which is always available. The "simple" path may not
+# be available, and the "advanced" path asks too many questions.
+xserver-xorg xserver-xorg/config/monitor/selection-method \
+ select medium
+xserver-xorg xserver-xorg/config/monitor/mode-list \
+ select 1024x768 @ 60 Hz
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+# debconf-get-selections --installer > file
+# debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+
diff --git a/builder/website/ubuntu.sh b/builder/website/ubuntu.sh
new file mode 100755
index 0000000..edafd69
--- /dev/null
+++ b/builder/website/ubuntu.sh
@@ -0,0 +1,84 @@
+#!/bin/bash -
+# libguestfs
+# Copyright (C) 2013 Red Hat Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+# The basic plan comes from:
+# http://honk.sigxcpu.org/con/Preseeding_Debian_virtual_machines_with_virt_install.html
+# https://wiki.debian.org/DebianInstaller/Preseed
+# https://help.ubuntu.com/10.04/installation-guide/i386/preseed-using.html
+
+unset CDPATH
+export LANG=C
+set -e
+set -x
+
+if [ $# -ne 2 ]; then
+ echo "$0 VERSION DIST"
+ exit 1
+fi
+
+# Some configuration.
+version=$1
+dist=$2
+location=http://archive.ubuntu.net/ubuntu/dists/$dist/main/installer-amd64
+output=ubuntu-$version
+tmpname=tmp-$(tr -cd 'a-f0-9' < /dev/urandom | head -c 8)
+
+rm -f $output $output.old $output.xz
+
+# Make sure it's being run from the correct directory.
+if [ ! -f ubuntu.preseed ]; then
+ echo "You are running this script from the wrong directory."
+ exit 1
+fi
+
+# Note that the injected file must be called "/preseed.cfg" in order
+# for d-i to pick it up.
+sed -e "s,@CACHE@,$http_proxy,g" < ubuntu.preseed > preseed.cfg
+
+# Clean up function.
+cleanup ()
+{
+ rm -f preseed.cfg
+ virsh undefine $tmpname ||:
+}
+trap cleanup INT QUIT TERM EXIT ERR
+
+virt-install \
+ --name=$tmpname \
+ --ram=1024 \
+ --os-type=linux --os-variant=ubuntu$dist \
+ --initrd-inject=$(pwd)/preseed.cfg \
+ --extra-args="auto console=tty0 console=ttyS0,115200" \
+ --disk=$(pwd)/$output,size=4 \
+ --location=$location \
+ --nographics \
+ --noreboot
+
+# Sysprep (removes logfiles and so on).
+virt-sysprep -a $output
+
+# Sparsify.
+mv $output $output.old
+virt-sparsify $output.old $output
+rm $output.old
+
+# Compress.
+xz --best --block-size=16777216 $output
+
+# Result:
+ls -lh $output.xz
--
1.8.3.1