diff --git a/kea.conf.pre b/kea.conf.pre
new file mode 100644
index 0000000..52d22b6
--- /dev/null
+++ b/kea.conf.pre
@@ -0,0 +1,112 @@
+# This is a basic configuration for the Kea DHCPv4 and DHCPv6 servers.
+# Subnet declarations are commented out and no interfaces are listed.
+# Therefore, the servers will not listen or to any queries. The basic
+# configuration must be extended to specify interfaces on which the
+# servers should listen. Also, subnets and options must be declared.
+{
+
+# DHCPv4 configuration starts here.
+"Dhcp4":
+{
+# Add names of interfaces to listen on.
+  "interfaces": [ ],
+
+# Use Memfile lease database backend to store leases in a CSV file.
+  "lease-database": {
+    "type": "memfile"
+  },
+
+# Global (inherited by all subnets) lease lifetime is mandatory parameter.
+  "valid-lifetime": 4000,
+
+# Below an example of the simple subnet declaration. Uncomment to
+# enable it. This is a list, denoted with [ ], of structure, denoted
+# with { }. Each structure describes a single subnet and may have
+# several parameters. One of those parameters is "pools" that is
+# also a list of structures.
+  "subnet4": [
+#  {    "subnet": "192.0.2.0/24",
+#       "pools": [ { "pool": "192.0.2.1 - 192.0.2.200" } ] }
+  ]
+},
+
+# DHCPv6 configuration starts here.
+"Dhcp6":
+{
+# Add names of interfaces to listen on.
+  "interfaces": [ ],
+
+# Addresses will be assigned with preferred and valid lifetimes
+# being 3000 and 4000, respectively. Client is told to start
+# renewing after 1000 seconds. If the server does not repond
+# after 2000 seconds since the lease was granted, client is supposed
+# to start REBIND procedure (emergency renewal that allows switching
+# to a different server).
+  "preferred-lifetime": 3000,
+  "valid-lifetime": 4000,
+  "renew-timer": 1000,
+  "rebind-timer": 2000,
+
+# The following list defines subnets. Uncomment to enable them.
+  "subnet6": [
+#  {    "subnet": "2001:db8:1::/64",
+#       "pools": [ { "pool": "2001:db8:1::/80" } ] },
+#  {    "subnet": "2001:db8:2::/64",
+#       "pools": [ { "pool": "2001:db8:2::/80" } ] },
+#  {    "subnet": "2001:db8:3::/64",
+#       "pools": [ { "pool": "2001:db8:3::/80" } ] },
+#  {    "subnet": "2001:db8:4::/64",
+#       "pools": [ { "pool": "2001:db8:4::/80" } ] }
+   ]
+},
+
+# DHCP DDNS configuration starts here.
+"DhcpDdns":
+{
+  "ip_address": "127.0.0.1",
+  "port": 53001,
+  "tsig_keys": [],
+  "forward_ddns" : {},
+  "reverse_ddns" : {}
+},
+
+# Logging configuration starts here. It tells Kea servers to store
+# all log messages (on severity INFO or more) in a file.
+# debuglevel variable is used on DEBUG level only.
+"Logging":
+{
+  "loggers": [
+    {
+      "name": "kea-dhcp4",
+      "output_options": [
+          {
+            "output": "/var/log/kea-dhcp4.log"
+          }
+      ],
+      "severity": "INFO",
+      "debuglevel": 0
+    },
+    {
+      "name": "kea-dhcp6",
+      "output_options": [
+          {
+            "output": "/var/log/kea-dhcp6.log"
+          }
+      ],
+      "severity": "INFO",
+      "debuglevel": 0
+    },
+    {
+      "name": "kea-dhcp-ddns",
+      "output_options": [
+          {
+            "output": "/var/log/kea-ddns.log"
+          }
+      ],
+      "severity": "INFO",
+      "debuglevel": 0
+    }
+  ]
+}
+
+}
diff --git a/kea.spec b/kea.spec
index de7d4ec..8e4bbfa 100644
--- a/kea.spec
+++ b/kea.spec
@@ -15,6 +15,9 @@ License:  ISC and Boost
 URL:      http://kea.isc.org
 Source0:  http://ftp.isc.org/isc/kea/%{VERSION}/kea-%{VERSION}.tar.gz
 
+# TODO: remove this with 1.0
+Source1:  kea.conf.pre
+
 # http://kea.isc.org/ticket/3529
 Patch0:   kea-systemd.patch
 
@@ -111,6 +114,8 @@ touch %{buildroot}%{_sharedstatedir}/kea/kea-leases6.csv
 
 install -p -m 644 ext/LICENSE_1_0.txt %{buildroot}%{_defaultdocdir}/kea/
 
+install -p -m 644 %{SOURCE1} %{buildroot}%{_sysconfdir}/kea/kea.conf
+
 %post
 %systemd_post kea-dhcp4.service kea-dhcp6.service kea-dhcp-ddns.service
 
@@ -203,6 +208,7 @@ install -p -m 644 ext/LICENSE_1_0.txt %{buildroot}%{_defaultdocdir}/kea/
 %changelog
 * Tue Nov 04 2014 Jiri Popelka <jpopelka@redhat.com> - 0.9-3
 - do not override @localstatedir@ globally
+- include latest upstream kea.conf
 
 * Wed Sep 24 2014 Dan Horák <dan[at]danny.cz> - 0.9-2
 - valgrind available only on selected arches