# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany. # Copyright (c) 2007 Hans de Goede , the Fedora project. # # This file and all modifications and additions to the pristine # package are under the same license as the package itself. Name: i2c-tools Version: 3.1.0 Release: 17%{?dist} Summary: A heterogeneous set of I2C tools for Linux Group: Applications/System License: GPLv2+ URL: http://www.lm-sensors.org/wiki/I2CTools Source0: http://dl.lm-sensors.org/i2c-tools/releases/%{name}-%{version}.tar.bz2 # Introducing man pages for binaries in the eepromer subpackage # Introducing -r switch in the i2cset help Patch0: i2c-tools-3.1-man-eeproX.patch # Introducing man pages for decode-* binaries Patch1: i2c-tools-3.1-man-decodeX.patch # for /etc/udev/makedev.d resp /etc/modprobe.d ownership Requires: udev module-init-tools BuildRequires: perl-generators BuildRequires: python-devel ExcludeArch: s390 s390x %description This package contains a heterogeneous set of I2C tools for Linux: a bus probing tool, a chip dumper, register-level access helpers, EEPROM decoding scripts, and more. %package eepromer Summary: Programs for reading / writing i2c / smbus eeproms Group: Applications/System # For the device nodes Requires: %{name} = %{version}-%{release} %description eepromer Programs for reading / writing i2c / smbus eeproms. Notice that writing the eeproms in your system is very dangerous and is likely to render your system unusable. Do not install, let alone use this, unless you really, _really_ know what you are doing. %package python Summary: Python bindings for Linux SMBus access through i2c-dev Group: Applications/System %description python %package perl Summary: i2c tools written in Perl Group: Applications/System %description perl %prep %setup -q %patch0 -p1 %patch1 -p1 %build make CFLAGS="$RPM_OPT_FLAGS" pushd eepromer make CFLAGS="$RPM_OPT_FLAGS -I../include" popd pushd py-smbus CFLAGS="$RPM_OPT_FLAGS -I../include" %{__python} setup.py build popd %install make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix} install -m 755 eepromer/{eepromer,eeprom,eeprog} \ $RPM_BUILD_ROOT%{_sbindir} install -m 644 eepromer/{eepromer,eeprom,eeprog}.8 \ $RPM_BUILD_ROOT%{_mandir}/man8 pushd py-smbus %{__python} setup.py install --skip-build --root=$RPM_BUILD_ROOT popd # cleanup rm -f $RPM_BUILD_ROOT%{_bindir}/decode-edid.pl # Remove userland kernel headers, belong in glibc-kernheaders. rm -rf $RPM_BUILD_ROOT%{_includedir}/linux # Remove unpleasant DDC tools. KMS already exposes the EDID block in sysfs, # and edid-decode is a more complete tool than decode-edid. rm -f $RPM_BUILD_ROOT%{_bindir}/{ddcmon,decode-edid} # for i2c-dev ondemand loading through kmod mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/modprobe.d echo "alias char-major-89-* i2c-dev" > \ $RPM_BUILD_ROOT%{_sysconfdir}/modprobe.d/i2c-dev.conf # for /dev/i2c-# creation (which are needed for kmod i2c-dev autoloading) mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/udev/makedev.d for (( i = 0 ; i < 8 ; i++ )) do echo "i2c-$i" >> $RPM_BUILD_ROOT%{_sysconfdir}/udev/makedev.d/99-i2c-dev.nodes done # auto-load i2c-dev after reboot mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/modules-load.d echo 'i2c-dev' > $RPM_BUILD_ROOT%{_prefix}/lib/modules-load.d/%{name}.conf %post # load i2c-dev after the first install if [ "$1" = 1 ] ; then /usr/sbin/modprobe i2c-dev fi exit 0 %files %doc CHANGES COPYING README %config(noreplace) %{_sysconfdir}/modprobe.d/i2c-dev.conf %config(noreplace) %{_sysconfdir}/udev/makedev.d/99-i2c-dev.nodes %{_sbindir}/* %exclude %{_sbindir}/eepro* %exclude %{_sbindir}/i2c-stub* %{_mandir}/man8/*.8.gz %exclude %{_mandir}/man8/eepro* %exclude %{_mandir}/man8/i2c-stub-from-dump.8.gz %{_prefix}/lib/modules-load.d/%{name}.conf %files eepromer %doc eepromer/README* %{_sbindir}/eepro* %{_mandir}/man8/eepro*.8.gz %files python %doc py-smbus/README #/usr/lib64/python2.7/site-packages/smbus-1.1-py2.7.egg-info #/usr/lib64/python2.7/site-packages/smbus.so %{python_sitearch}/* %files perl %{_bindir}/decode-* %{_sbindir}/i2c-stub* %{_mandir}/man1/decode-*.1.gz %{_mandir}/man8/i2c-stub-from-dump.8.gz %changelog * Tue Jul 19 2016 Fedora Release Engineering - 3.1.0-17 - https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages * Thu Feb 04 2016 Fedora Release Engineering - 3.1.0-16 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Thu Oct 08 2015 Jaromir Capik - 3.1.0-15 - Adding i2c-dev auto-load in th %%post and modules-load.d (#913203) * Wed Jun 17 2015 Fedora Release Engineering - 3.1.0-14 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Sat Aug 16 2014 Fedora Release Engineering - 3.1.0-13 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Sat Jun 07 2014 Fedora Release Engineering - 3.1.0-12 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Wed Oct 9 2013 Peter Robinson 3.1.0-11 - Split out perl tools to a separate subpackage * Fri Oct 04 2013 Jaromir Capik - 3.1.0-10 - Making the decode-* man pages installable with Makefile * Thu Oct 03 2013 Jaromir Capik - 3.1.0-9 - Introducing man pages for decode-* binaries - Cleaning the spec * Sat Aug 03 2013 Fedora Release Engineering - 3.1.0-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Wed Jul 17 2013 Petr Pisar - 3.1.0-7 - Perl 5.18 rebuild * Wed Jul 03 2013 Jaromir Capik - 3.1.0-6 - Installing the man pages and putting them in the files section * Wed Jul 03 2013 Jaromir Capik - 3.1.0-5 - Introducing man pages for binaries in the eepromer subpackage - Introducing -r switch in the i2cset help * Sat Jun 1 2013 Henrik Nordstrom - 3.1.0-4 - Package python interface * Thu Feb 14 2013 Fedora Release Engineering - 3.1.0-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Thu Jul 19 2012 Fedora Release Engineering - 3.1.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Mon Feb 20 2012 Adam Jackson 3.1.0-1 - i2c-tools 3.1.0 * Fri Jan 13 2012 Fedora Release Engineering - 3.0.3-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Tue Jul 05 2011 Adam Jackson 3.0.3-1 - i2c-tools 3.0.3 * Wed Feb 09 2011 Fedora Release Engineering - 3.0.2-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Fri Jul 24 2009 Fedora Release Engineering - 3.0.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Mon Apr 13 2009 Adam Jackson 3.0.2-3 - mv /etc/modprobe.d/i2c-dev /etc/modprobe.d/i2c-dev.conf (#495455) * Tue Feb 24 2009 Fedora Release Engineering - 3.0.2-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Thu Dec 11 2008 Adam Jackson 3.0.2-1 - i2c-tools 3.0.2 * Wed Mar 5 2008 Hans de Goede 3.0.0-3 - Change /dev/i2c-# creation from /lib/udev/devices to /etc/udev/makedev.d usage - Add an /etc/modprobe.d/i2c-dev file to work around bug 380971 * Tue Feb 19 2008 Fedora Release Engineering - 3.0.0-2 - Autorebuild for GCC 4.3 * Tue Nov 13 2007 Hans de Goede 3.0.0-1 - Initial Fedora package, based on Suse specfile * Mon Oct 15 2007 - jdelvare@suse.de - Initial release.