# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.

# Copyright (c) 2007 Hans de Goede <j.w.r.degoede@hhs>, the Fedora project.

#

# This file and all modifications and additions to the pristine

# package are under the same license as the package itself.

Name:           i2c-tools

Version:        3.1.2

Release:        1%{?dist}

Summary:        A heterogeneous set of I2C tools for Linux

Group:          Applications/System

License:        GPLv2+

URL:            https://i2c.wiki.kernel.org/index.php/I2C_Tools

Source0:        https://www.kernel.org/pub/software/utils/i2c-tools/%{name}-%{version}.tar.xz

# for /etc/udev/makedev.d resp /etc/modprobe.d ownership

Requires:       udev module-init-tools

BuildRequires:  perl-generators

BuildRequires:  python-devel

ExcludeArch:    s390 s390x

%description

This package contains a heterogeneous set of I2C tools for Linux: a bus

probing tool, a chip dumper, register-level access helpers, EEPROM

decoding scripts, and more.

%package eepromer

Summary:        Programs for reading / writing i2c / smbus eeproms

Group:          Applications/System

# For the device nodes

Requires:       %{name} = %{version}-%{release}

%description eepromer

Programs for reading / writing i2c / smbus eeproms. Notice that writing the

eeproms in your system is very dangerous and is likely to render your system

unusable. Do not install, let alone use this, unless you really, _really_ know

what you are doing.

%package python

Summary:        Python bindings for Linux SMBus access through i2c-dev

Group:          Applications/System

%description python

%package perl

Summary:        i2c tools written in Perl

Group:          Applications/System

%description perl

%prep

%setup -q

%build

make CFLAGS="$RPM_OPT_FLAGS"

pushd eepromer

make CFLAGS="$RPM_OPT_FLAGS -I../include"

popd

pushd py-smbus

CFLAGS="$RPM_OPT_FLAGS -I../include" %{__python} setup.py build

popd

%install

make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}

install -m 755 eepromer/{eepromer,eeprom,eeprog} \

  $RPM_BUILD_ROOT%{_sbindir}

install -m 644 eepromer/{eepromer,eeprom,eeprog}.8 \

  $RPM_BUILD_ROOT%{_mandir}/man8

pushd py-smbus

%{__python} setup.py install --skip-build --root=$RPM_BUILD_ROOT

popd

# cleanup

rm -f $RPM_BUILD_ROOT%{_bindir}/decode-edid.pl

# Remove userland kernel headers, belong in glibc-kernheaders.

rm -rf $RPM_BUILD_ROOT%{_includedir}/linux

# Remove unpleasant DDC tools.  KMS already exposes the EDID block in sysfs,

# and edid-decode is a more complete tool than decode-edid.

rm -f $RPM_BUILD_ROOT%{_bindir}/{ddcmon,decode-edid}

# for i2c-dev ondemand loading through kmod

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/modprobe.d 

echo "alias char-major-89-* i2c-dev" > \

  $RPM_BUILD_ROOT%{_sysconfdir}/modprobe.d/i2c-dev.conf

# for /dev/i2c-# creation (which are needed for kmod i2c-dev autoloading)

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/udev/makedev.d

for (( i = 0 ; i < 8 ; i++ )) do

  echo "i2c-$i" >> $RPM_BUILD_ROOT%{_sysconfdir}/udev/makedev.d/99-i2c-dev.nodes

done

# auto-load i2c-dev after reboot

mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/modules-load.d

echo 'i2c-dev' > $RPM_BUILD_ROOT%{_prefix}/lib/modules-load.d/%{name}.conf

%post

# load i2c-dev after the first install

if [ "$1" = 1 ] ; then

  /usr/sbin/modprobe i2c-dev

fi

exit 0

%files

%doc CHANGES COPYING README

%config(noreplace) %{_sysconfdir}/modprobe.d/i2c-dev.conf

%config(noreplace) %{_sysconfdir}/udev/makedev.d/99-i2c-dev.nodes

%{_sbindir}/*

%exclude %{_sbindir}/eepro*

%exclude %{_sbindir}/i2c-stub*

%{_mandir}/man8/*.8.gz

%exclude %{_mandir}/man8/eepro*

%exclude %{_mandir}/man8/i2c-stub-from-dump.8.gz

%{_prefix}/lib/modules-load.d/%{name}.conf

%files eepromer

%doc eepromer/README*

%{_sbindir}/eepro*

%{_mandir}/man8/eepro*.8.gz

%files python

%doc py-smbus/README

#/usr/lib64/python2.7/site-packages/smbus-1.1-py2.7.egg-info

#/usr/lib64/python2.7/site-packages/smbus.so

%{python_sitearch}/*

%files perl

%{_bindir}/decode-*

%{_sbindir}/i2c-stub*

%{_mandir}/man1/decode-*.1.gz

%{_mandir}/man8/i2c-stub-from-dump.8.gz

%changelog

* Wed Jul 19 2017 Ondřej Lysoněk <olysonek@redhat.com> - 3.1.2-1

- New version

- Updated upstream and source code URL

- Dropped patches accepted by upstream

* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 3.1.0-18

- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild

* Tue Jul 19 2016 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-17

- https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages

* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 3.1.0-16

- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild

* Thu Oct 08 2015 Jaromir Capik <jcapik@redhat.com> - 3.1.0-15

- Adding i2c-dev auto-load in th %%post and modules-load.d (#913203)

* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-14

- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild

* Sat Aug 16 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-13

- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild

* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-12

- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild

* Wed Oct 9  2013 Peter Robinson <pbrobinson@fedoraproject.org> 3.1.0-11

- Split out perl tools to a separate subpackage

* Fri Oct 04 2013 Jaromir Capik <jcapik@redhat.com> - 3.1.0-10

- Making the decode-* man pages installable with Makefile

* Thu Oct 03 2013 Jaromir Capik <jcapik@redhat.com> - 3.1.0-9

- Introducing man pages for decode-* binaries

- Cleaning the spec

* Sat Aug 03 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-8

- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild

* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 3.1.0-7

- Perl 5.18 rebuild

* Wed Jul 03 2013 Jaromir Capik <jcapik@redhat.com> - 3.1.0-6

- Installing the man pages and putting them in the files section

* Wed Jul 03 2013 Jaromir Capik <jcapik@redhat.com> - 3.1.0-5

- Introducing man pages for binaries in the eepromer subpackage

- Introducing -r switch in the i2cset help

* Sat Jun  1 2013 Henrik Nordstrom <henrik@henriknordstrom.net> - 3.1.0-4

- Package python interface

* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-3

- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild

* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.1.0-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild

* Mon Feb 20 2012 Adam Jackson <ajax@redhat.com> 3.1.0-1

- i2c-tools 3.1.0

* Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.0.3-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild

* Tue Jul 05 2011 Adam Jackson <ajax@redhat.com> 3.0.3-1

- i2c-tools 3.0.3

* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.0.2-5

- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.0.2-4

- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

* Mon Apr 13 2009 Adam Jackson <ajax@redhat.com> 3.0.2-3

- mv /etc/modprobe.d/i2c-dev /etc/modprobe.d/i2c-dev.conf (#495455)

* Tue Feb 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.0.2-2

- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild

* Thu Dec 11 2008 Adam Jackson <ajax@redhat.com> 3.0.2-1

- i2c-tools 3.0.2

* Wed Mar  5 2008 Hans de Goede <j.w.r.degoede@hhs.nl> 3.0.0-3

- Change /dev/i2c-# creation from /lib/udev/devices to /etc/udev/makedev.d

  usage

- Add an /etc/modprobe.d/i2c-dev file to work around bug 380971

* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 3.0.0-2

- Autorebuild for GCC 4.3

* Tue Nov 13 2007 Hans de Goede <j.w.r.degoede@hhs.nl> 3.0.0-1

- Initial Fedora package, based on Suse specfile

* Mon Oct 15 2007 - jdelvare@suse.de

- Initial release.