diff --git a/.cvsignore b/.cvsignore
index e69de29..30b60a9 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -0,0 +1 @@
+diffutils-2.7.tar.gz
diff --git a/cmp.1 b/cmp.1
new file mode 100644
index 0000000..9db561a
--- /dev/null
+++ b/cmp.1
@@ -0,0 +1,107 @@
+.\" Copyright (c) 1987, 1990, 1993
+.\"	The Regents of the University of California.  All rights reserved.
+.\"
+.\" This code is derived from software contributed to Berkeley by
+.\" the Institute of Electrical and Electronics Engineers, Inc.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by the University of
+.\"	California, Berkeley and its contributors.
+.\" 4. Neither the name of the University nor the names of its contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"    without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\"     @(#)cmp.1	8.1 (Berkeley) 6/6/93
+.\"
+.Dd June 6, 1993
+.Dt CMP 1
+.Os
+.Sh NAME
+.Nm cmp
+.Nd compare two files
+.Sh SYNOPSIS
+.Nm cmp
+.Op Fl l | Fl s
+.Ar file1 file2
+.Op Ar skip1 Op Ar skip2
+.Sh DESCRIPTION
+The cmp utility compares two files of any type and writes the results
+to the standard output.
+By default,
+.Nm
+is silent if the files are the same; if they differ, the byte
+and line number at which the first difference occurred is reported.
+.Pp
+Bytes and lines are numbered beginning with one.
+.Pp
+The following options are available:
+.Bl -tag -width flag
+.It Fl l
+Print the byte number (decimal) and the differing
+byte values (octal) for each difference.
+.It Fl s
+Print nothing for differing files; return exit
+status only.
+.El
+.Pp
+The optional arguments
+.Ar skip1
+and 
+.Ar skip2
+are the byte offsets from the beginning of
+.Ar file1
+and
+.Ar file2 ,
+respectively, where the comparison will begin.
+The offset is decimal by default, but may be expressed as an hexadecimal
+or octal value by preceding it with a leading ``0x'' or ``0''.
+.Pp
+The
+.Nm cmp
+utility exits with one of the following values:
+.Bl -tag -width 4n
+.It 0
+The files are identical.
+.It 1
+The files are different; this includes the case
+where one file is identical to the first part of
+the other.
+In the latter case, if the
+.Fl s
+option has not been specified,
+.Nm cmp
+writes to standard output that EOF was reached in the shorter
+file (before any differences were found).
+.It >1
+An error occurred.
+.El
+.Sh SEE ALSO
+.Xr diff 1 ,
+.Xr diff3 1
+.Sh STANDARDS
+The
+.Nm cmp
+utility is expected to be
+.St -p1003.2
+compatible.
diff --git a/diff.1 b/diff.1
new file mode 100644
index 0000000..e16f6d9
--- /dev/null
+++ b/diff.1
@@ -0,0 +1,473 @@
+.TH DIFF 1 "22sep1993" "GNU Tools" "GNU Tools"
+.SH NAME
+diff \- find differences between two files
+.SH SYNOPSIS
+.B diff
+[options] from-file to-file
+.SH DESCRIPTION
+In the simplest case, 
+.I diff
+compares the contents of the two files
+.I from-file
+and
+.IR to-file .
+A file name of
+.B \-
+stands for
+text read from the standard input.  As a special case,
+.B "diff \- \-"
+compares a copy of standard input to itself.
+
+If 
+.I from-file
+is a directory and
+.I to-file
+is not,
+.I diff
+compares the file in
+.I from-file
+whose file name is that of
+.IR to-file ,
+and vice versa.  The non-directory file must not be
+.BR \- .
+
+If both
+.I from-file
+and
+.I to-file
+are directories,
+.I diff
+compares corresponding files in both directories, in
+alphabetical order; this comparison is not recursive unless the
+.B \-r
+or
+.B \-\-recursive
+option is given.
+.I diff
+never
+compares the actual contents of a directory as if it were a file.  The
+file that is fully specified may not be standard input, because standard
+input is nameless and the notion of ``file with the same name'' does not
+apply.
+
+.B diff
+options begin with
+.BR \- ,
+so normally
+.I from-file
+and
+.I to-file
+may not begin with
+.BR \- .
+However,
+.B \-\-
+as an
+argument by itself treats the remaining arguments as file names even if
+they begin with
+.BR \- .
+.SS Options
+Below is a summary of all of the options that GNU
+.I diff
+accepts.
+Most options have two equivalent names, one of which is a single letter
+preceded by
+.BR \- ,
+and the other of which is a long name preceded by
+.BR \-\- .
+Multiple single letter options (unless they take an
+argument) can be combined into a single command line word:
+.B \-ac
+is
+equivalent to
+.BR "\-a \-c" .
+Long named options can be abbreviated to
+any unique prefix of their name.  Brackets
+.RB ( [
+and
+.BR ] )
+indicate that an
+option takes an optional argument.
+.TP
+.BI \- lines
+Show
+.I lines
+(an integer) lines of context.  This option does not
+specify an output format by itself; it has no effect unless it is
+combined with
+.B \-c
+or
+.BR \-u .
+This option is obsolete.  For proper
+operation,
+.I patch
+typically needs at least two lines of context.
+.TP
+.B \-a
+Treat all files as text and compare them line-by-line, even if they
+do not seem to be text.
+.TP
+.B \-b
+Ignore changes in amount of white space.
+.TP
+.B \-B
+Ignore changes that just insert or delete blank lines.
+.TP
+.B \-\-brief
+Report only whether the files differ, not the details of the
+differences.
+.TP
+.B \-c
+Use the context output format.
+.TP
+.BI "\-C " lines
+.br
+.ns
+.TP
+.BI \-\-context[= lines ]
+Use the context output format, showing
+.I lines
+(an integer) lines of
+context, or three if
+.I lines
+is not given.
+For proper operation,
+.I patch
+typically needs at least two lines of
+context.
+.TP
+.BI \-\-changed\-group\-format= format
+Use
+.I format
+to output a line group containing differing lines from
+both files in if-then-else format.
+.TP
+.B \-d
+Change the algorithm to perhaps find a smaller set of changes.  This makes
+.I diff
+slower (sometimes much slower).
+.TP
+.BI "\-D " name
+Make merged if-then-else format output, conditional on the preprocessor
+macro
+.IR name .
+.TP
+.B \-e
+.br
+.ns
+.TP
+.B \-\-ed
+Make output that is a valid
+.I ed
+script.
+.TP
+.BI \-\-exclude= pattern
+When comparing directories, ignore files and subdirectories whose basenames
+match
+.IR pattern .
+.TP
+.BI \-\-exclude\-from= file
+When comparing directories, ignore files and subdirectories whose basenames
+match any pattern contained in
+.IR file .
+.TP
+.B \-\-expand\-tabs
+Expand tabs to spaces in the output, to preserve the alignment of tabs
+in the input files.
+.TP
+.B \-f
+Make output that looks vaguely like an
+.I ed
+script but has changes
+in the order they appear in the file.
+.TP
+.BI "\-F " regexp
+In context and unified format, for each hunk of differences, show some
+of the last preceding line that matches
+.IR regexp .
+.TP
+.B \-\-forward\-ed
+Make output that looks vaguely like an
+.B ed
+script but has changes
+in the order they appear in the file.
+.TP
+.B \-h
+This option currently has no effect; it is present for Unix
+compatibility.
+.TP
+.B \-H
+Use heuristics to speed handling of large files that have numerous
+scattered small changes.
+.TP
+.BI \-\-horizon\-lines= lines
+Do not discard the last
+.I lines
+lines of the common prefix
+and the first
+.I lines
+lines of the common suffix.
+.TP
+.B \-i
+Ignore changes in case; consider upper- and lower-case letters
+equivalent.
+.TP
+.BI "\-I " regexp
+Ignore changes that just insert or delete lines that match
+.IR regexp .
+.TP
+.BI \-\-ifdef= name
+Make merged if-then-else format output, conditional on the preprocessor
+macro
+.IR name .
+.TP
+.B \-\-ignore\-all\-space
+Ignore white space when comparing lines.
+.TP
+.B \-\-ignore\-blank\-lines
+Ignore changes that just insert or delete blank lines.
+.TP
+.B \-\-ignore\-case
+Ignore changes in case; consider upper- and lower-case to be the same.
+.TP
+.BI \-\-ignore\-matching\-lines= regexp
+Ignore changes that just insert or delete lines that match
+.IR regexp .
+.TP
+.B \-\-ignore\-space\-change
+Ignore changes in amount of white space.
+.TP
+.B \-\-initial\-tab
+Output a tab rather than a space before the text of a line in normal or
+context format.  This causes the alignment of tabs in the line to look
+normal.
+.TP
+.B \-l
+Pass the output through
+.I pr
+to paginate it.
+.TP
+.BI "\-L " label
+.br
+.ns
+.TP
+.BI \-\-label= label
+Use
+.I label
+instead of the file name in the context format
+and unified format
+headers.
+.TP
+.B \-\-left\-column
+Print only the left column of two common lines in side by side format.
+.TP
+.BI \-\-line\-format= format
+Use
+.I format
+to output all input lines in in-then-else format.
+.TP
+.B \-\-minimal
+Change the algorithm to perhaps find a smaller set of changes.  This
+makes
+.I diff
+slower (sometimes much slower).
+.TP
+.B \-n
+Output RCS-format diffs; like
+.B \-f
+except that each command
+specifies the number of lines affected.
+.TP
+.B \-N
+.br
+.ns
+.TP
+.B \-\-new\-file
+In directory comparison, if a file is found in only one directory,
+treat it as present but empty in the other directory.
+.TP
+.BI \-\-new\-group\-format= format
+Use
+.I format
+to output a group of lines taken from just the second
+file in if-then-else format.
+.TP
+.BI \-\-new\-line\-format= format
+Use 
+.I format
+to output a line taken from just the second file in
+if-then-else format.
+.TP
+.BI \-\-old\-group\-format= format
+Use
+.I format
+to output a group of lines taken from just the first
+file in if-then-else format.
+.TP
+.BI \-\-old\-line\-format= format
+Use
+.I format
+to output a line taken from just the first file in
+if-then-else format.
+.TP
+.B \-p
+Show which C function each change is in.
+.TP
+.B \-P
+When comparing directories, if a file appears only in the second
+directory of the two, treat it as present but empty in the other.
+.TP
+.B \-\-paginate
+Pass the output through
+.I pr
+to paginate it.
+.TP
+.B \-q
+Report only whether the files differ, not the details of the
+differences.
+.TP
+.B \-r
+When comparing directories, recursively compare any subdirectories
+found.
+.TP
+.B \-\-rcs
+Output RCS-format diffs; like
+.B \-f
+except that each command
+specifies the number of lines affected.
+.TP
+.B \-\-recursive
+When comparing directories, recursively compare any subdirectories
+found.
+.TP
+.B \-\-report\-identical\-files
+.br
+.ns
+.TP
+.B \-s
+Report when two files are the same.
+.TP
+.BI "\-S " file
+When comparing directories, start with the file
+.IR file .
+This is
+used for resuming an aborted comparison.
+.TP
+.B \-\-sdiff\-merge\-assist
+Print extra information to help
+.IR sdiff .
+.I sdiff
+uses this
+option when it runs
+.IR diff .
+This option is not intended for users
+to use directly.
+.TP
+.B \-\-show\-c\-function
+Show which C function each change is in.
+.TP
+.BI \-\-show\-function\-line= regexp
+In context and unified format, for each hunk of differences, show some
+of the last preceding line that matches
+.IR regexp .
+.TP
+.B \-\-side\-by\-side
+Use the side by side output format.
+.TP
+.B \-\-speed\-large\-files
+Use heuristics to speed handling of large files that have numerous
+scattered small changes.
+.TP
+.BI \-\-starting\-file= file
+When comparing directories, start with the file
+.IR file .
+This is
+used for resuming an aborted comparison.
+.TP
+.B \-\-suppress\-common\-lines
+Do not print common lines in side by side format.
+.TP
+.B \-t
+Expand tabs to spaces in the output, to preserve the alignment of tabs
+in the input files.
+.TP
+.B \-T
+Output a tab rather than a space before the text of a line in normal or
+context format.  This causes the alignment of tabs in the line to look
+normal.
+.TP
+.B \-\-text
+Treat all files as text and compare them line-by-line, even if they
+do not appear to be text.
+.TP
+.B \-u
+Use the unified output format.
+.TP
+.BI \-\-unchanged\-group\-format= format
+Use
+.I format
+to output a group of common lines taken from both files
+in if-then-else format.
+.TP
+.BI \-\-unchanged\-line\-format= format
+Use
+.I format
+to output a line common to both files in if-then-else
+format.
+.TP
+.B \-\-unidirectional\-new\-file
+When comparing directories, if a file appears only in the second
+directory of the two, treat it as present but empty in the other.
+.TP
+.BI "\-U " lines
+.br
+.ns
+.TP
+.BI \-\-unified[= lines ]
+Use the unified output format, showing
+.I lines
+(an integer) lines of
+context, or three if
+.I lines
+is not given.
+For proper operation,
+.I patch
+typically needs at least two lines of
+context.
+.TP
+.B \-v
+.br
+.ns
+.TP
+.B \-\-version
+Output the version number of
+.IR diff .
+.TP
+.B \-w
+Ignore white space when comparing lines.
+.TP
+.BI "\-W " columns
+.br
+.ns
+.TP
+.BI \-\-width= columns
+Use an output width of
+.I columns
+in side by side format.
+.TP
+.BI "\-x " pattern
+When comparing directories, ignore files and subdirectories whose basenames
+match
+.IR pattern .
+.TP
+.BI "\-X " file
+When comparing directories, ignore files and subdirectories whose basenames
+match any pattern contained in
+.IR file .
+.TP
+.B \-y
+Use the side by side output format.
+.SH SEE ALSO
+cmp(1), comm(1), diff3(1), ed(1), patch(1), pr(1), sdiff(1).
+.SH DIAGNOSTICS
+An exit status of 0 means no differences were found, 1 means some
+differences were found, and 2 means trouble.
diff --git a/diff3.1 b/diff3.1
new file mode 100644
index 0000000..9873b08
--- /dev/null
+++ b/diff3.1
@@ -0,0 +1,210 @@
+.TH DIFF3 1 "22sep1993" "GNU Tools" "GNU Tools"
+.SH NAME
+diff3 \- find differences between three files
+.SH SYNOPSIS
+.B diff3
+[options] mine older yours
+.SH DESCRIPTION
+The
+.I diff3
+command compares three files and outputs descriptions
+of their differences.
+
+The files to compare are
+.IR mine ,
+.IR older ,
+and
+.IR yours .
+At most one of these three file names may be
+.BR \- ,
+which tells
+.I diff3
+to read the standard input for that file.
+.SS Options
+Below is a summary of all of the options that GNU
+.I diff3
+accepts.  Multiple single letter options (unless they take an argument)
+can be combined into a single command line argument.
+.TP
+.B \-a
+Treat all files as text and compare them line-by-line, even if they
+do not appear to be text.
+.TP
+.B \-A
+Incorporate all changes from
+.I older
+to
+.I yours
+into
+.IR mine ,
+surrounding all conflicts with bracket lines.
+.TP
+.B \-B
+Old behavior of -A.  Shows non-conflicts.
+.TP
+.B \-e
+Generate an
+.I ed
+script that incorporates all the changes from
+.I older
+to
+.I yours
+into
+.IR mine .
+.TP
+.B \-E
+Like
+.BR \-e ,
+except bracket lines from overlapping changes' first
+and third files.
+With
+.BR \-e ,
+an overlapping change looks like this:
+.sp
+.nf
+<<<<<<< \fImine\fP
+lines from \fImine\fP
+=======
+lines from \fIyours\fP
+>>>>>>> \fIyours\fP
+.fi
+.TP
+.B \-\-ed
+Generate an
+.I ed
+script that incorporates all the changes from
+.I older
+to
+.I yours
+into
+.IR mine .
+.TP
+.B \-\-easy\-only
+Like
+.BR \-e ,
+except output only the nonoverlapping changes.
+.TP
+.B \-i
+Generate
+.B w
+and
+.B q
+commands at the end of the
+.I ed
+script for System V compatibility.  This option must be combined with
+one of the
+.B \-AeExX3
+options, and may not be combined with
+.BR \-m .
+.TP
+.B \-\-initial\-tab
+Output a tab rather than two spaces before the text of a line in normal format.
+This causes the alignment of tabs in the line to look normal.
+.TP
+.BI "\-L " label
+.ns
+.TP
+.BI \-\-label= label
+Use the label
+.I label
+for the brackets output by the
+.BR \-A ,
+.B \-E
+and
+.B \-X
+options.  This option may be given up to three
+times, one for each input file.  The default labels are the names of
+the input files.  Thus
+.B "diff3 \-L X \-L Y \-L Z \-m A B C"
+acts like
+.BR "diff3 \-m A B C ,
+except that the output looks like it came from
+files named
+.BR X ,
+.B Y
+and
+.B Z
+rather than from files
+named
+.BR A ,
+.B B
+and
+.BR C .
+.TP
+.B \-m
+.br
+.ns
+.TP
+.B \-\-merge
+Apply the edit script to the first file and send the result to standard
+output.  Unlike piping the output from
+.I diff3
+to
+.IR ed ,
+this
+works even for binary files and incomplete lines.
+.B \-A
+is assumed
+if no edit script option is specified.
+.TP
+.B \-\-overlap\-only
+Like
+.BR \-e ,
+except output only the overlapping changes.
+.TP
+.B \-\-show\-all
+Incorporate all unmerged changes from
+.I older
+to
+.I yours
+into
+.IR mine ,
+surrounding all overlapping changes with bracket lines.
+.TP
+.B \-\-show\-overlap
+Like
+.BR \-e ,
+except bracket lines from overlapping changes' first
+and third files.
+.TP
+.B \-T
+Output a tab rather than two spaces before the text of a line in normal format.
+This causes the alignment of tabs in the line to look normal.
+.TP
+.B \-\-text
+Treat all files as text and compare them line-by-line, even if they
+do not appear to be text.
+.TP
+.B \-v
+.br
+.ns
+.TP
+.B \-\-version
+Output the version number of
+.IR diff3 .
+.TP
+.B \-x
+Like
+.BR \-e ,
+except output only the overlapping changes.
+.TP
+.B \-X
+Like
+.BR \-E ,
+except output only the overlapping changes.
+In other words, like
+.BR \-x ,
+except bracket changes as in
+.BR \-E .
+.TP
+.B \-3
+Like
+.BR \-e ,
+except output only the nonoverlapping changes.
+.SH SEE ALSO
+cmp(1), comm(1), diff(1), ed(1), patch(1), sdiff(1).
+.SH DIAGNOSTICS
+An exit status of 0 means
+.I diff3
+was successful, 1 means some
+conflicts were found, and 2 means trouble.
diff --git a/diffutils.spec b/diffutils.spec
new file mode 100644
index 0000000..62b301b
--- /dev/null
+++ b/diffutils.spec
@@ -0,0 +1,123 @@
+Summary: A GNU collection of diff utilities.
+Name: diffutils
+Version: 2.7
+Release: 21
+Group: Applications/Text
+URL: http://www.gnu.org/software/diffutils/diffutils.html
+Source: ftp://ftp.gnu.org/gnu/diffutils/diffutils-%{version}.tar.gz
+Source1: cmp.1
+Source2: diff.1
+Source3: diff3.1
+Source4: sdiff.1
+License: GPL
+Prefix: %{_prefix}
+Prereq: /sbin/install-info
+Buildroot: %{_tmppath}/%{name}-%{version}-root
+
+%description
+Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
+compares two files and shows the differences, line by line.  The cmp
+command shows the offset and line numbers where two files differ, or
+cmp can show the characters that differ between the two files.  The
+diff3 command shows the differences between three files.  Diff3 can be
+used when two people have made independent changes to a common
+original; diff3 can produce a merged file that contains both sets of
+changes and warnings about conflicts.  The sdiff command can be used
+to merge two files interactively.
+
+Install diffutils if you need to compare text files.
+
+%prep
+%setup -q
+
+%build
+autoconf
+%configure
+make PR_PROGRAM=%{_bindir}/pr
+
+%install
+rm -rf $RPM_BUILD_ROOT
+%makeinstall
+
+( cd $RPM_BUILD_ROOT
+  gzip -9nf .%{_infodir}/diff*
+  mkdir -p .%{_mandir}/man1
+  for manpage in %{SOURCE1} %{SOURCE3} %{SOURCE4}
+  do
+    install -m 0644 ${manpage} .%{_mandir}/man1
+  done
+)
+
+%post
+/sbin/install-info %{_infodir}/diff.info.gz %{_infodir}/dir --entry="* diff: (diff).                 The GNU diff."
+
+%preun
+if [ $1 = 0 ]; then
+    /sbin/install-info --delete %{_infodir}/diff.info.gz %{_infodir}/dir --entry="* diff: (diff).                 The GNU diff."
+fi
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc NEWS README
+%{_bindir}/*
+%{_mandir}/*/*
+%{_infodir}/diff.info*gz
+
+%changelog
+* Wed Jul 12 2000 Prospector <bugzilla@redhat.com>
+- automatic rebuild
+
+* Thu Jul 06 2000 Trond Eivind Glomsr�d <teg@redhat.com>
+- fix %%changelog entries (escape them)
+- update source location
+- remove manual stripping
+- add URL
+
+* Tue Jun 06 2000 Than Ngo <than@redhat.de>
+- add %%defattr
+- use rpm macros
+
+* Wed May 31 2000 Ngo Than <than@redhat.de>
+- put man pages and info files in correct place
+- cleanup specfile
+
+* Thu Feb 03 2000 Preston Brown <pbrown@redhat.com>
+- rebuild to gzip man pages.
+
+* Mon Apr 19 1999 Jeff Johnson <jbj@redhat.com>
+- man pages not in %%files.
+- but avoid conflict for diff.1
+
+* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com> 
+- auto rebuild in the new build environment (release 14)
+
+* Sun Mar 14 1999 Jeff Johnson <jbj@redhat.com>
+- add man pages (#831).
+- add %%configure and Prefix.
+
+* Thu Dec 17 1998 Cristian Gafton <gafton@redhat.com>
+- build for glibc 2.1
+
+* Tue Jul 14 1998 Bill Kawakami <billk@home.com>
+- included the four man pages stolen from Slackware
+
+* Tue May 05 1998 Prospector System <bugs@redhat.com>
+- translations modified for de, fr, tr
+
+* Sun May 03 1998 Cristian Gafton <gafton@redhat.com>
+- fixed spec file to reference/use the $RPM_BUILD_ROOT always
+    
+* Wed Dec 31 1997 Otto Hammersmith <otto@redhat.com>
+- fixed where it looks for 'pr' (/usr/bin, rather than /bin)
+
+* Fri Oct 17 1997 Donnie Barnes <djb@redhat.com>
+- added BuildRoot
+
+* Sun Sep 14 1997 Erik Troan <ewt@redhat.com>
+- uses install-info
+
+* Mon Jun 02 1997 Erik Troan <ewt@redhat.com>
+- built against glibc
diff --git a/sdiff.1 b/sdiff.1
new file mode 100644
index 0000000..8b7e88c
--- /dev/null
+++ b/sdiff.1
@@ -0,0 +1,198 @@
+.TH SDIFF 1 "22sep1993" "GNU Tools" "GNU Tools"
+.SH NAME
+sdiff \- find differences between two files and merge interactively
+.SH SYNOPSIS
+.B sdiff
+.B -o
+outfile [options] from-file to-file
+.SH DESCRIPTION
+The
+.I sdiff
+command merges two files and interactively outputs the
+results to
+.IR outfile .
+
+If
+.I from-file
+is a directory and
+.I to-file
+is not,
+.I sdiff
+compares the file in
+.I from-file
+whose file name is that of
+.IR to-file ,
+and vice versa.
+.I from-file
+and
+.I to-file
+may not both be
+directories.
+
+.I sdiff
+options begin with
+.BR \- ,
+so normally
+.I from-file
+and
+.I to-file
+may not begin with
+.BR \- .
+However,
+.B \-\-
+as an
+argument by itself treats the remaining arguments as file names even if
+they begin with
+.BR \- .
+You may not use
+.B \-
+as an input file.
+
+.I sdiff
+without
+.B \-o
+(or
+.BR \-\-output )
+produces a
+side-by-side difference.  This usage is obsolete; use
+.B "diff \-\-side\-by\-side"
+instead.
+.SS Options
+Below is a summary of all of the options that GNU
+.I sdiff
+accepts.
+Each option has two equivalent names, one of which is a single
+letter preceded by
+.BR \- ,
+and the other of which is a long name
+preceded by
+.BR \-\- .
+Multiple single letter options (unless they take
+an argument) can be combined into a single command line argument.  Long
+named options can be abbreviated to any unique prefix of their name.
+.TP
+.B \-a
+Treat all files as text and compare them line-by-line, even if they
+do not appear to be text.
+.TP
+.B \-b
+Ignore changes in amount of white space.
+.TP
+.B \-B
+Ignore changes that just insert or delete blank lines.
+.TP
+.B \-d
+Change the algorithm to perhaps find a smaller set of changes.  This
+makes
+.I sdiff
+slower (sometimes much slower).
+.TP
+.B \-H
+Use heuristics to speed handling of large files that have numerous
+scattered small changes.
+.TP
+.B \-\-expand\-tabs
+Expand tabs to spaces in the output, to preserve the alignment of tabs
+in the input files.
+.TP
+.B \-i
+Ignore changes in case; consider upper- and lower-case to be the same.
+.TP
+.BI "\-I " regexp
+Ignore changes that just insert or delete lines that match
+.IR regexp .
+.TP
+.B \-\-ignore\-all\-space
+Ignore white space when comparing lines.
+.TP
+.B \-\-ignore\-blank\-lines
+Ignore changes that just insert or delete blank lines.
+.TP
+.B \-\-ignore\-case
+Ignore changes in case; consider upper- and lower-case to be the same.
+.TP
+.BI \-\-ignore\-matching\-lines= regexp
+Ignore changes that just insert or delete lines that match
+.IR regexp .
+.TP
+.B \-\-ignore\-space\-change
+Ignore changes in amount of white space.
+.TP
+.B \-l
+.br
+.ns
+.TP
+.B \-\-left\-column
+Print only the left column of two common lines.
+.TP
+.B \-\-minimal
+Change the algorithm to perhaps find a smaller set of changes.  This
+makes
+.I sdiff
+slower (sometimes much slower).
+.TP
+.BI "\-o " file
+.br
+.ns
+.TP
+.BI \-\-output= file
+Put merged output into
+.IR file .
+This option is required for merging.
+.TP
+.B \-s
+.br
+.ns
+.TP
+.B \-\-suppress\-common\-lines
+Do not print common lines.
+.TP
+.B \-\-speed\-large\-files
+Use heuristics to speed handling of large files that have numerous
+scattered small changes.
+.TP
+.B \-t
+Expand tabs to spaces in the output, to preserve the alignment of tabs
+in the input files.
+.TP
+.B \-\-text
+Treat all files as text and compare them line-by-line, even if they
+do not appear to be text.
+.TP
+.B \-v
+.br
+.ns
+.TP
+.B \-\-version
+Output the version number of
+.IR sdiff .
+.TP
+.BI "\-w " columns
+.br
+.ns
+.TP
+.BI \-\-width= columns
+Use an output width of
+.IR columns .
+Note that for historical reasons, this option is
+.B \-W
+in
+.IR diff ,
+.B \-w
+in
+.IR sdiff .
+.TP
+.B \-W
+Ignore horizontal white space when comparing lines.
+Note that for historical reasons, this option is
+.B \-w
+in
+.IR diff ,
+.B \-W
+in
+.IR sdiff .
+.SH SEE ALSO
+cmp(1), comm(1), diff(1), diff3(1).
+.SH DIAGNOSTICS
+An exit status of 0 means no differences were found, 1 means some
+differences were found, and 2 means trouble.
diff --git a/sources b/sources
index e69de29..65da125 100644
--- a/sources
+++ b/sources
@@ -0,0 +1 @@
+300d86a0566afee1c3756828f6c9538a  diffutils-2.7.tar.gz