From 1252afc9375f5da609fa2604365a9e8d300c4a64 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mar 08 2014 15:53:33 +0000 Subject: Remove unused patches --- diff --git a/avrdude-5.11.1-fix-texi-errors.patch b/avrdude-5.11.1-fix-texi-errors.patch deleted file mode 100644 index cfe7f33..0000000 --- a/avrdude-5.11.1-fix-texi-errors.patch +++ /dev/null @@ -1,120 +0,0 @@ -diff -Naur avrdude-5.11.1.orig/doc/avrdude.texi avrdude-5.11.1/doc/avrdude.texi ---- avrdude-5.11.1.orig/doc/avrdude.texi 2013-06-17 21:01:46.000000000 +0200 -+++ avrdude-5.11.1/doc/avrdude.texi 2013-06-17 20:58:07.000000000 +0200 -@@ -643,7 +643,7 @@ - the exitspec arguments provided, as follows: - - @table @code --@itemx reset -+@item reset - The `/RESET' signal will be left activated at program exit, that is it - will be held low, in order to keep the MCU in reset state afterwards. - Note in particular that the programming algorithm for the AT90S1200 -@@ -652,24 +652,24 @@ - a previous invocation of AVRDUDE with this option specified is one of - the possible ways to guarantee this condition. - --@itemx noreset -+@item noreset - The `/RESET' line will be deactivated at program exit, thus allowing the - MCU target program to run while the programming hardware remains - connected. - --@itemx vcc -+@item vcc - This option will leave those parallel port pins active (i. e. high) that - can be used to supply `Vcc' power to the MCU. - --@itemx novcc -+@item novcc - This option will pull the `Vcc' pins of the parallel port down at - program exit. - --@itemx d_high -+@item d_high - This option will leave the 8 data pins on the parallel port active - (i. e. high). - --@itemx d_low -+@item d_low - This option will leave the 8 data pins on the parallel port inactive - (i. e. low). - -@@ -839,13 +839,13 @@ - The @var{op} field specifies what operation to perform: - - @table @code --@itemx r -+@item r - read the specified device memory and write to the specified file - --@itemx w -+@item w - read the specified file and write it to the specified device memory - --@itemx v -+@item v - read the specified device memory and the specified file and perform a verify operation - - @end table -@@ -855,16 +855,16 @@ - the file to read or write. Possible values are: - - @table @code --@itemx i -+@item i - Intel Hex - --@itemx s -+@item s - Motorola S-record - --@itemx r -+@item r - raw binary; little-endian byte order, in the case of the flash ROM data - --@itemx m -+@item m - immediate mode; actual byte values specified on the command line, - separated by commas or spaces in place of the @var{filename} field of - the @option{-U} option. This is useful -@@ -874,25 +874,25 @@ - leading zero (@code{0}) it is treated as octal. Otherwise, the value is - treated as decimal. - --@itemx a -+@item a - auto detect; valid for input only, and only if the input is not provided - at stdin. - --@itemx d -+@item d - decimal; this and the following formats are only valid on output. - They generate one line of output for the respective memory section, - forming a comma-separated list of the values. - This can be particularly useful for subsequent processing, like for - fuse bit settings. - --@itemx h -+@item h - hexadecimal; each value will get the string @emph{0x} prepended. - --@itemx o -+@item o - octal; each value will get a @emph{0} - prepended unless it is less than 8 in which case it gets no prefix. - --@itemx b -+@item b - binary; each value will get the string @emph{0b} prepended. - - @end table -@@ -1724,7 +1724,7 @@ - and socket card: - - @multitable @columnfractions .25 .25 .5 --Routing card @tab Socket card @tab Devices -+@item Routing card @tab Socket card @tab Devices - @item @code{} @tab @code{STK600-ATTINY10} @tab ATtiny4 ATtiny5 ATtiny9 ATtiny10 - @item @code{STK600-RC008T-2} @tab @code{STK600-DIP} @tab ATtiny11 ATtiny12 ATtiny13 ATtiny13A ATtiny25 ATtiny45 ATtiny85 - @item @code{STK600-RC008T-7} @tab @code{STK600-DIP} @tab ATtiny15 diff --git a/avrdude-aarch64.patch b/avrdude-aarch64.patch deleted file mode 100644 index 892e35b..0000000 --- a/avrdude-aarch64.patch +++ /dev/null @@ -1,2663 +0,0 @@ -diff -urN avrdude-5.11.1/config.guess avrdude-5.11.1-aarch64/config.guess ---- avrdude-5.11.1/config.guess 2011-09-15 09:48:27.000000000 -0500 -+++ avrdude-5.11.1-aarch64/config.guess 2013-03-07 19:38:13.898726946 -0600 -@@ -1,9 +1,10 @@ - #! /bin/sh - # Attempt to guess a canonical system name. - # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, --# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, -+# 2011, 2012 Free Software Foundation, Inc. - --timestamp='2003-07-02' -+timestamp='2012-09-25' - - # This file is free software; you can redistribute it and/or modify it - # under the terms of the GNU General Public License as published by -@@ -16,24 +17,24 @@ - # General Public License for more details. - # - # You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+# along with this program; if not, see . - # - # As a special exception to the GNU General Public License, if you - # distribute this file as part of a program that contains a - # configuration script generated by Autoconf, you may include it under - # the same distribution terms that you use for the rest of that program. - --# Originally written by Per Bothner . --# Please send patches to . Submit a context --# diff and a properly formatted ChangeLog entry. -+ -+# Originally written by Per Bothner. Please send patches (context -+# diff format) to and include a ChangeLog -+# entry. - # - # This script attempts to guess a canonical system name similar to - # config.sub. If it succeeds, it prints the system name on stdout, and - # exits with 0. Otherwise, it exits with 1. - # --# The plan is that this can be called by configure scripts if you --# don't specify an explicit build system type. -+# You can get the latest version of this script from: -+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD - - me=`echo "$0" | sed -e 's,.*/,,'` - -@@ -53,7 +54,8 @@ - GNU config.guess ($timestamp) - - Originally written by Per Bothner. --Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 - Free Software Foundation, Inc. - - This is free software; see the source for copying conditions. There is NO -@@ -66,11 +68,11 @@ - while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) -- echo "$timestamp" ; exit 0 ;; -+ echo "$timestamp" ; exit ;; - --version | -v ) -- echo "$version" ; exit 0 ;; -+ echo "$version" ; exit ;; - --help | --h* | -h ) -- echo "$usage"; exit 0 ;; -+ echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. -@@ -104,7 +106,7 @@ - trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; - trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; - : ${TMPDIR=/tmp} ; -- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || -+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -@@ -123,7 +125,7 @@ - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; --esac ;' -+esac ; set_cc_for_build= ;' - - # This is needed to find uname on a Pyramid OSx when run in the BSD universe. - # (ghazi@noc.rutgers.edu 1994-08-24) -@@ -141,7 +143,7 @@ - case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or -- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, -+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward -@@ -158,6 +160,7 @@ - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; -+ sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched -@@ -166,7 +169,7 @@ - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ -- | grep __ELF__ >/dev/null -+ | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? -@@ -176,7 +179,7 @@ - fi - ;; - *) -- os=netbsd -+ os=netbsd - ;; - esac - # The OS release -@@ -196,50 +199,36 @@ - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" -- exit 0 ;; -- amiga:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- arc:OpenBSD:*:*) -- echo mipsel-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- hp300:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mac68k:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- macppc:OpenBSD:*:*) -- echo powerpc-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mvme68k:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mvme88k:OpenBSD:*:*) -- echo m88k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mvmeppc:OpenBSD:*:*) -- echo powerpc-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- pmax:OpenBSD:*:*) -- echo mipsel-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- sgi:OpenBSD:*:*) -- echo mipseb-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- sun3:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- wgrisc:OpenBSD:*:*) -- echo mipsel-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; -+ *:Bitrig:*:*) -+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` -+ echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} -+ exit ;; - *:OpenBSD:*:*) -- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` -+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} -+ exit ;; -+ *:ekkoBSD:*:*) -+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} -+ exit ;; -+ *:SolidBSD:*:*) -+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} -+ exit ;; -+ macppc:MirBSD:*:*) -+ echo powerpc-unknown-mirbsd${UNAME_RELEASE} -+ exit ;; -+ *:MirBSD:*:*) -+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} -+ exit ;; - alpha:OSF1:*:*) -- if test $UNAME_RELEASE = "V4.0"; then -+ case $UNAME_RELEASE in -+ *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` -- fi -+ ;; -+ *5.*) -+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` -+ ;; -+ esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU -@@ -277,42 +266,52 @@ - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac -+ # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. -- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` -- exit 0 ;; -- Alpha*:OpenVMS:*:*) -- echo alpha-hp-vms -- exit 0 ;; -+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` -+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code. -+ exitcode=$? -+ trap '' 0 -+ exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix -- exit 0 ;; -+ exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 -- exit 0 ;; -+ exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 -- exit 0;; -+ exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos -- exit 0 ;; -+ exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos -- exit 0 ;; -+ exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition -- exit 0 ;; -+ exit ;; -+ *:z/VM:*:*) -+ echo s390-ibm-zvmoe -+ exit ;; -+ *:OS400:*:*) -+ echo powerpc-ibm-os400 -+ exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} -- exit 0;; -+ exit ;; -+ arm*:riscos:*:*|arm*:RISCOS:*:*) -+ echo arm-unknown-riscos -+ exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp -- exit 0;; -+ exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then -@@ -320,32 +319,51 @@ - else - echo pyramid-pyramid-bsd - fi -- exit 0 ;; -+ exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 -- exit 0 ;; -+ exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 -- exit 0 ;; -- DRS?6000:UNIX_SV:4.2*:7*) -+ exit ;; -+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in -- sparc) echo sparc-icl-nx7 && exit 0 ;; -+ sparc) echo sparc-icl-nx7; exit ;; - esac ;; -+ s390x:SunOS:*:*) -+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -+ exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -- i86pc:SunOS:5.*:*) -- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; -+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) -+ echo i386-pc-auroraux${UNAME_RELEASE} -+ exit ;; -+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) -+ eval $set_cc_for_build -+ SUN_ARCH="i386" -+ # If there is a compiler, see if it is configured for 64-bit objects. -+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. -+ # This test works for both compilers. -+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then -+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ -+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ -+ grep IS_64BIT_ARCH >/dev/null -+ then -+ SUN_ARCH="x86_64" -+ fi -+ fi -+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -+ exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) -@@ -354,10 +372,10 @@ - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` -- exit 0 ;; -+ exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 -@@ -369,10 +387,10 @@ - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac -- exit 0 ;; -+ exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor -@@ -382,38 +400,41 @@ - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) -- echo m68k-atari-mint${UNAME_RELEASE} -- exit 0 ;; -+ echo m68k-atari-mint${UNAME_RELEASE} -+ exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) -- echo m68k-atari-mint${UNAME_RELEASE} -- exit 0 ;; -+ echo m68k-atari-mint${UNAME_RELEASE} -+ exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) -- echo m68k-milan-mint${UNAME_RELEASE} -- exit 0 ;; -+ echo m68k-milan-mint${UNAME_RELEASE} -+ exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) -- echo m68k-hades-mint${UNAME_RELEASE} -- exit 0 ;; -+ echo m68k-hades-mint${UNAME_RELEASE} -+ exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) -- echo m68k-unknown-mint${UNAME_RELEASE} -- exit 0 ;; -+ echo m68k-unknown-mint${UNAME_RELEASE} -+ exit ;; -+ m68k:machten:*:*) -+ echo m68k-apple-machten${UNAME_RELEASE} -+ exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 -- exit 0 ;; -+ exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -@@ -437,35 +458,36 @@ - exit (-1); - } - EOF -- $CC_FOR_BUILD -o $dummy $dummy.c \ -- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ -- && exit 0 -+ $CC_FOR_BUILD -o $dummy $dummy.c && -+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && -+ SYSTEM_NAME=`$dummy $dummyarg` && -+ { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax -- exit 0 ;; -+ exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax -- exit 0 ;; -+ exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax -- exit 0 ;; -+ exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix -- exit 0 ;; -+ exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 -- exit 0 ;; -+ exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 -- exit 0 ;; -+ exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 -- exit 0 ;; -+ exit ;; - AViiON:dgux:*:*) -- # DG/UX returns AViiON for all architectures -- UNAME_PROCESSOR=`/usr/bin/uname -p` -+ # DG/UX returns AViiON for all architectures -+ UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ -@@ -478,29 +500,29 @@ - else - echo i586-dg-dgux${UNAME_RELEASE} - fi -- exit 0 ;; -+ exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 -- exit 0 ;; -+ exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 -- exit 0 ;; -+ exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 -- exit 0 ;; -+ exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd -- exit 0 ;; -+ exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` -- exit 0 ;; -+ exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. -- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id -- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' -+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id -+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix -- exit 0 ;; -+ exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` -@@ -508,7 +530,7 @@ - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} -- exit 0 ;; -+ exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build -@@ -523,15 +545,19 @@ - exit(0); - } - EOF -- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 -- echo rs6000-ibm-aix3.2.5 -+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` -+ then -+ echo "$SYSTEM_NAME" -+ else -+ echo rs6000-ibm-aix3.2.5 -+ fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi -- exit 0 ;; -- *:AIX:*:[45]) -+ exit ;; -+ *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 -@@ -544,28 +570,28 @@ - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} -- exit 0 ;; -+ exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix -- exit 0 ;; -+ exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 -- exit 0 ;; -+ exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to -- exit 0 ;; # report: romp-ibm BSD 4.3 -+ exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx -- exit 0 ;; -+ exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 -- exit 0 ;; -+ exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd -- exit 0 ;; -+ exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 -- exit 0 ;; -+ exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in -@@ -574,52 +600,52 @@ - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` -- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` -- case "${sc_cpu_version}" in -- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 -- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 -- 532) # CPU_PA_RISC2_0 -- case "${sc_kernel_bits}" in -- 32) HP_ARCH="hppa2.0n" ;; -- 64) HP_ARCH="hppa2.0w" ;; -+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` -+ case "${sc_cpu_version}" in -+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 -+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 -+ 532) # CPU_PA_RISC2_0 -+ case "${sc_kernel_bits}" in -+ 32) HP_ARCH="hppa2.0n" ;; -+ 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 -- esac ;; -- esac -+ esac ;; -+ esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build -- sed 's/^ //' << EOF >$dummy.c -+ sed 's/^ //' << EOF >$dummy.c -+ -+ #define _HPUX_SOURCE -+ #include -+ #include - -- #define _HPUX_SOURCE -- #include -- #include -- -- int main () -- { -- #if defined(_SC_KERNEL_BITS) -- long bits = sysconf(_SC_KERNEL_BITS); -- #endif -- long cpu = sysconf (_SC_CPU_VERSION); -- -- switch (cpu) -- { -- case CPU_PA_RISC1_0: puts ("hppa1.0"); break; -- case CPU_PA_RISC1_1: puts ("hppa1.1"); break; -- case CPU_PA_RISC2_0: -- #if defined(_SC_KERNEL_BITS) -- switch (bits) -- { -- case 64: puts ("hppa2.0w"); break; -- case 32: puts ("hppa2.0n"); break; -- default: puts ("hppa2.0"); break; -- } break; -- #else /* !defined(_SC_KERNEL_BITS) */ -- puts ("hppa2.0"); break; -- #endif -- default: puts ("hppa1.0"); break; -- } -- exit (0); -- } -+ int main () -+ { -+ #if defined(_SC_KERNEL_BITS) -+ long bits = sysconf(_SC_KERNEL_BITS); -+ #endif -+ long cpu = sysconf (_SC_CPU_VERSION); -+ -+ switch (cpu) -+ { -+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break; -+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break; -+ case CPU_PA_RISC2_0: -+ #if defined(_SC_KERNEL_BITS) -+ switch (bits) -+ { -+ case 64: puts ("hppa2.0w"); break; -+ case 32: puts ("hppa2.0n"); break; -+ default: puts ("hppa2.0"); break; -+ } break; -+ #else /* !defined(_SC_KERNEL_BITS) */ -+ puts ("hppa2.0"); break; -+ #endif -+ default: puts ("hppa1.0"); break; -+ } -+ exit (0); -+ } - EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa -@@ -627,9 +653,19 @@ - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then -- # avoid double evaluation of $set_cc_for_build -- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build -- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null -+ eval $set_cc_for_build -+ -+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating -+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler -+ # generating 64-bit code. GNU and HP use different nomenclature: -+ # -+ # $ CC_FOR_BUILD=cc ./config.guess -+ # => hppa2.0w-hp-hpux11.23 -+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess -+ # => hppa64-hp-hpux11.23 -+ -+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | -+ grep -q __LP64__ - then - HP_ARCH="hppa2.0w" - else -@@ -637,11 +673,11 @@ - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} -- exit 0 ;; -+ exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} -- exit 0 ;; -+ exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -@@ -669,211 +705,269 @@ - exit (0); - } - EOF -- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 -+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && -+ { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 -- exit 0 ;; -+ exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd -- exit 0 ;; -+ exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd -- exit 0 ;; -+ exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix -- exit 0 ;; -+ exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf -- exit 0 ;; -+ exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf -- exit 0 ;; -+ exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi -- exit 0 ;; -+ exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites -- exit 0 ;; -+ exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd -- exit 0 ;; -+ exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi -- exit 0 ;; -+ exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd -- exit 0 ;; -+ exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd -- exit 0 ;; -+ exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd -- exit 0 ;; -+ exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - *:UNICOS/mp:*:*) -- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -+ exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` -- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` -- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` -- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" -- exit 0 ;; -+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` -+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` -+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" -+ exit ;; -+ 5000:UNIX_System_V:4.*:*) -+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` -+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` -+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" -+ exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} -- exit 0 ;; -- *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) -- # Determine whether the default compiler uses glibc. -- eval $set_cc_for_build -- sed 's/^ //' << EOF >$dummy.c -- #include -- #if __GLIBC__ >= 2 -- LIBC=gnu -- #else -- LIBC= -- #endif --EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` -- # GNU/FreeBSD systems have a "k" prefix to indicate we are using -- # FreeBSD's kernel, but not the complete OS. -- case ${LIBC} in gnu) kernel_only='k' ;; esac -- echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} -- exit 0 ;; -+ exit ;; -+ *:FreeBSD:*:*) -+ UNAME_PROCESSOR=`/usr/bin/uname -p` -+ case ${UNAME_PROCESSOR} in -+ amd64) -+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; -+ *) -+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; -+ esac -+ exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin -- exit 0 ;; -- i*:MINGW*:*) -+ exit ;; -+ *:MINGW64*:*) -+ echo ${UNAME_MACHINE}-pc-mingw64 -+ exit ;; -+ *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 -- exit 0 ;; -+ exit ;; -+ i*:MSYS*:*) -+ echo ${UNAME_MACHINE}-pc-msys -+ exit ;; -+ i*:windows32*:*) -+ # uname -m includes "-pc" on this system. -+ echo ${UNAME_MACHINE}-mingw32 -+ exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 -- exit 0 ;; -- x86:Interix*:[34]*) -- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' -- exit 0 ;; -+ exit ;; -+ *:Interix*:*) -+ case ${UNAME_MACHINE} in -+ x86) -+ echo i586-pc-interix${UNAME_RELEASE} -+ exit ;; -+ authenticamd | genuineintel | EM64T) -+ echo x86_64-unknown-interix${UNAME_RELEASE} -+ exit ;; -+ IA64) -+ echo ia64-unknown-interix${UNAME_RELEASE} -+ exit ;; -+ esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks -- exit 0 ;; -+ exit ;; -+ 8664:Windows_NT:*) -+ echo x86_64-pc-mks -+ exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix -- exit 0 ;; -+ exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin -- exit 0 ;; -+ exit ;; -+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) -+ echo x86_64-unknown-cygwin -+ exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin -- exit 0 ;; -+ exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; - *:GNU:*:*) -+ # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` -- exit 0 ;; -+ exit ;; -+ *:GNU/*:*:*) -+ # other systems with GNU libc and userland -+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu -+ exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix -- exit 0 ;; -+ exit ;; -+ aarch64:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ aarch64_be:Linux:*:*) -+ UNAME_MACHINE=aarch64_be -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ alpha:Linux:*:*) -+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in -+ EV5) UNAME_MACHINE=alphaev5 ;; -+ EV56) UNAME_MACHINE=alphaev56 ;; -+ PCA56) UNAME_MACHINE=alphapca56 ;; -+ PCA57) UNAME_MACHINE=alphapca56 ;; -+ EV6) UNAME_MACHINE=alphaev6 ;; -+ EV67) UNAME_MACHINE=alphaev67 ;; -+ EV68*) UNAME_MACHINE=alphaev68 ;; -+ esac -+ objdump --private-headers /bin/sh | grep -q ld.so.1 -+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi -+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} -+ exit ;; - arm*:Linux:*:*) -+ eval $set_cc_for_build -+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ -+ | grep -q __ARM_EABI__ -+ then -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ else -+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ -+ | grep -q __ARM_PCS_VFP -+ then -+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi -+ else -+ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf -+ fi -+ fi -+ exit ;; -+ avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; - cris:Linux:*:*) -- echo cris-axis-linux-gnu -- exit 0 ;; -- ia64:Linux:*:*) -+ echo ${UNAME_MACHINE}-axis-linux-gnu -+ exit ;; -+ crisv32:Linux:*:*) -+ echo ${UNAME_MACHINE}-axis-linux-gnu -+ exit ;; -+ frv:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -- m68*:Linux:*:*) -+ exit ;; -+ hexagon:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -- mips:Linux:*:*) -+ exit ;; -+ i*86:Linux:*:*) -+ LIBC=gnu - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -- #undef CPU -- #undef mips -- #undef mipsel -- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) -- CPU=mipsel -- #else -- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) -- CPU=mips -- #else -- CPU= -- #endif -+ #ifdef __dietlibc__ -+ LIBC=dietlibc - #endif - EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` -- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 -- ;; -- mips64:Linux:*:*) -+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` -+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}" -+ exit ;; -+ ia64:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ m32r*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ m68*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU -- #undef mips64 -- #undef mips64el -+ #undef ${UNAME_MACHINE} -+ #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) -- CPU=mips64el -+ CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) -- CPU=mips64 -+ CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif - EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` -- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 -+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` -+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; -- ppc:Linux:*:*) -- echo powerpc-unknown-linux-gnu -- exit 0 ;; -- ppc64:Linux:*:*) -- echo powerpc64-unknown-linux-gnu -- exit 0 ;; -- alpha:Linux:*:*) -- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in -- EV5) UNAME_MACHINE=alphaev5 ;; -- EV56) UNAME_MACHINE=alphaev56 ;; -- PCA56) UNAME_MACHINE=alphapca56 ;; -- PCA57) UNAME_MACHINE=alphapca56 ;; -- EV6) UNAME_MACHINE=alphaev6 ;; -- EV67) UNAME_MACHINE=alphaev67 ;; -- EV68*) UNAME_MACHINE=alphaev68 ;; -- esac -- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null -- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi -- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} -- exit 0 ;; -+ or32:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ padre:Linux:*:*) -+ echo sparc-unknown-linux-gnu -+ exit ;; -+ parisc64:Linux:*:* | hppa64:Linux:*:*) -+ echo hppa64-unknown-linux-gnu -+ exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in -@@ -881,109 +975,71 @@ - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac -- exit 0 ;; -- parisc64:Linux:*:* | hppa64:Linux:*:*) -- echo hppa64-unknown-linux-gnu -- exit 0 ;; -+ exit ;; -+ ppc64:Linux:*:*) -+ echo powerpc64-unknown-linux-gnu -+ exit ;; -+ ppc:Linux:*:*) -+ echo powerpc-unknown-linux-gnu -+ exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux -- exit 0 ;; -+ exit ;; - sh64*:Linux:*:*) -- echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; -+ tile*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ vax:Linux:*:*) -+ echo ${UNAME_MACHINE}-dec-linux-gnu -+ exit ;; - x86_64:Linux:*:*) -- echo x86_64-unknown-linux-gnu -- exit 0 ;; -- i*86:Linux:*:*) -- # The BFD linker knows what the default object file format is, so -- # first see if it will tell us. cd to the root directory to prevent -- # problems with other programs or directories called `ld' in the path. -- # Set LC_ALL=C to ensure ld outputs messages in English. -- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ -- | sed -ne '/supported targets:/!d -- s/[ ][ ]*/ /g -- s/.*supported targets: *// -- s/ .*// -- p'` -- case "$ld_supported_targets" in -- elf32-i386) -- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" -- ;; -- a.out-i386-linux) -- echo "${UNAME_MACHINE}-pc-linux-gnuaout" -- exit 0 ;; -- coff-i386) -- echo "${UNAME_MACHINE}-pc-linux-gnucoff" -- exit 0 ;; -- "") -- # Either a pre-BFD a.out linker (linux-gnuoldld) or -- # one that does not give us useful --help. -- echo "${UNAME_MACHINE}-pc-linux-gnuoldld" -- exit 0 ;; -- esac -- # Determine whether the default compiler is a.out or elf -- eval $set_cc_for_build -- sed 's/^ //' << EOF >$dummy.c -- #include -- #ifdef __ELF__ -- # ifdef __GLIBC__ -- # if __GLIBC__ >= 2 -- LIBC=gnu -- # else -- LIBC=gnulibc1 -- # endif -- # else -- LIBC=gnulibc1 -- # endif -- #else -- #ifdef __INTEL_COMPILER -- LIBC=gnu -- #else -- LIBC=gnuaout -- #endif -- #endif --EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` -- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 -- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 -- ;; -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ xtensa*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 -- exit 0 ;; -+ exit ;; - i*86:UNIX_SV:4.2MP:2.*) -- # Unixware is an offshoot of SVR4, but it has its own version -- # number series starting with 2... -- # I am not positive that other SVR4 systems won't match this, -+ # Unixware is an offshoot of SVR4, but it has its own version -+ # number series starting with 2... -+ # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. -- # Use sysv4.2uw... so that sysv4* matches it. -+ # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} -- exit 0 ;; -+ exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx -- exit 0 ;; -+ exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop -- exit 0 ;; -+ exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos -- exit 0 ;; -- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) -+ exit ;; -+ i*86:syllable:*:*) -+ echo ${UNAME_MACHINE}-pc-syllable -+ exit ;; -+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp -- exit 0 ;; -+ exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then -@@ -991,15 +1047,16 @@ - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi -- exit 0 ;; -- i*86:*:5:[78]*) -+ exit ;; -+ i*86:*:5:[678]*) -+ # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} -- exit 0 ;; -+ exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi -- exit 0 ;; -+ exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv -- exit 0 ;; -+ exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv -- exit 0 ;; -+ exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix -- exit 0 ;; -- M68*:*:R3V[567]*:*) -- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; -- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) -+ exit ;; -+ M68*:*:R3V[5678]*:*) -+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; -+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -- && echo i486-ncr-sysv4.3${OS_REL} && exit 0 -+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ -- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; -+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) -- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -- && echo i486-ncr-sysv4 && exit 0 ;; -+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -+ && { echo i486-ncr-sysv4; exit; } ;; -+ NCR*:*:4.2:* | MPRAS*:*:4.2:*) -+ OS_REL='.3' -+ test -r /etc/.relid \ -+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` -+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } -+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ -+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } -+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ -+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 -- exit 0 ;; -+ exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) -+ exit ;; -+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 -- exit 0 ;; -+ exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 -- exit 0 ;; -+ exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` -@@ -1091,68 +1161,97 @@ - else - echo ns32k-sni-sysv - fi -- exit 0 ;; -- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort -- # says -- echo i586-unisys-sysv4 -- exit 0 ;; -+ exit ;; -+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort -+ # says -+ echo i586-unisys-sysv4 -+ exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 -- exit 0 ;; -+ exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 -- exit 0 ;; -+ exit ;; -+ i*86:VOS:*:*) -+ # From Paul.Green@stratus.com. -+ echo ${UNAME_MACHINE}-stratus-vos -+ exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos -- exit 0 ;; -+ exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 -- exit 0 ;; -+ exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then -- echo mips-nec-sysv${UNAME_RELEASE} -+ echo mips-nec-sysv${UNAME_RELEASE} - else -- echo mips-unknown-sysv${UNAME_RELEASE} -+ echo mips-unknown-sysv${UNAME_RELEASE} - fi -- exit 0 ;; -+ exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos -- exit 0 ;; -+ exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos -- exit 0 ;; -+ exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos -- exit 0 ;; -+ exit ;; -+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible. -+ echo i586-pc-haiku -+ exit ;; -+ x86_64:Haiku:*:*) -+ echo x86_64-unknown-haiku -+ exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; -+ SX-7:SUPER-UX:*:*) -+ echo sx7-nec-superux${UNAME_RELEASE} -+ exit ;; -+ SX-8:SUPER-UX:*:*) -+ echo sx8-nec-superux${UNAME_RELEASE} -+ exit ;; -+ SX-8R:SUPER-UX:*:*) -+ echo sx8r-nec-superux${UNAME_RELEASE} -+ exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:Darwin:*:*) -- case `uname -p` in -- *86) UNAME_PROCESSOR=i686 ;; -- powerpc) UNAME_PROCESSOR=powerpc ;; -+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown -+ case $UNAME_PROCESSOR in -+ i386) -+ eval $set_cc_for_build -+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then -+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ -+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ -+ grep IS_64BIT_ARCH >/dev/null -+ then -+ UNAME_PROCESSOR="x86_64" -+ fi -+ fi ;; -+ unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then -@@ -1160,22 +1259,28 @@ - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:QNX:*:4*) - echo i386-pc-qnx -- exit 0 ;; -- NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) -+ exit ;; -+ NEO-?:NONSTOP_KERNEL:*:*) -+ echo neo-tandem-nsk${UNAME_RELEASE} -+ exit ;; -+ NSE-*:NONSTOP_KERNEL:*:*) -+ echo nse-tandem-nsk${UNAME_RELEASE} -+ exit ;; -+ NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux -- exit 0 ;; -+ exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv -- exit 0 ;; -+ exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 -@@ -1186,33 +1291,55 @@ - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 -- exit 0 ;; -+ exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 -- exit 0 ;; -+ exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex -- exit 0 ;; -+ exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 -- exit 0 ;; -+ exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 -- exit 0 ;; -+ exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 -- exit 0 ;; -+ exit ;; - *:ITS:*:*) - echo pdp10-unknown-its -- exit 0 ;; -+ exit ;; - SEI:*:*:SEIUX) -- echo mips-sei-seiux${UNAME_RELEASE} -- exit 0 ;; -+ echo mips-sei-seiux${UNAME_RELEASE} -+ exit ;; -+ *:DragonFly:*:*) -+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` -+ exit ;; -+ *:*VMS:*:*) -+ UNAME_MACHINE=`(uname -p) 2>/dev/null` -+ case "${UNAME_MACHINE}" in -+ A*) echo alpha-dec-vms ; exit ;; -+ I*) echo ia64-dec-vms ; exit ;; -+ V*) echo vax-dec-vms ; exit ;; -+ esac ;; -+ *:XENIX:*:SysV) -+ echo i386-pc-xenix -+ exit ;; -+ i*86:skyos:*:*) -+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' -+ exit ;; -+ i*86:rdos:*:*) -+ echo ${UNAME_MACHINE}-pc-rdos -+ exit ;; -+ i*86:AROS:*:*) -+ echo ${UNAME_MACHINE}-pc-aros -+ exit ;; -+ x86_64:VMkernel:*:*) -+ echo ${UNAME_MACHINE}-unknown-esx -+ exit ;; - esac - --#echo '(No uname command or uname output not recognized.)' 1>&2 --#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 -- - eval $set_cc_for_build - cat >$dummy.c < - printf ("m68k-sony-newsos%s\n", - #ifdef NEWSOS4 -- "4" -+ "4" - #else -- "" -+ "" - #endif -- ); exit (0); -+ ); exit (0); - #endif - #endif - - #if defined (__arm) && defined (__acorn) && defined (__unix) -- printf ("arm-acorn-riscix"); exit (0); -+ printf ("arm-acorn-riscix\n"); exit (0); - #endif - - #if defined (hp300) && !defined (hpux) -@@ -1328,11 +1455,12 @@ - } - EOF - --$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 -+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && -+ { echo "$SYSTEM_NAME"; exit; } - - # Apollos put the system type in the environment. - --test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } -+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - - # Convex versions that predate uname can use getsysinfo(1) - -@@ -1341,22 +1469,22 @@ - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd -- exit 0 ;; -+ exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi -- exit 0 ;; -+ exit ;; - c34*) - echo c34-convex-bsd -- exit 0 ;; -+ exit ;; - c38*) - echo c38-convex-bsd -- exit 0 ;; -+ exit ;; - c4*) - echo c4-convex-bsd -- exit 0 ;; -+ exit ;; - esac - fi - -@@ -1367,7 +1495,9 @@ - the operating system you are using. It is advised that you - download the most up to date version of the config scripts from - -- ftp://ftp.gnu.org/pub/gnu/config/ -+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD -+and -+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - - If the version you run ($0) is already up to date, please - send the following data and any information you think might be -diff -urN avrdude-5.11.1/config.sub avrdude-5.11.1-aarch64/config.sub ---- avrdude-5.11.1/config.sub 2011-09-15 09:48:27.000000000 -0500 -+++ avrdude-5.11.1-aarch64/config.sub 2013-03-07 19:38:13.908725819 -0600 -@@ -1,9 +1,10 @@ - #! /bin/sh - # Configuration validation subroutine script. - # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, --# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, -+# 2011, 2012 Free Software Foundation, Inc. - --timestamp='2003-07-04' -+timestamp='2012-10-10' - - # This file is (in principle) common to ALL GNU software. - # The presence of a machine in this file suggests that SOME GNU software -@@ -20,23 +21,25 @@ - # GNU General Public License for more details. - # - # You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, --# Boston, MA 02111-1307, USA. -- -+# along with this program; if not, see . -+# - # As a special exception to the GNU General Public License, if you - # distribute this file as part of a program that contains a - # configuration script generated by Autoconf, you may include it under - # the same distribution terms that you use for the rest of that program. - -+ - # Please send patches to . Submit a context --# diff and a properly formatted ChangeLog entry. -+# diff and a properly formatted GNU ChangeLog entry. - # - # Configuration subroutine to validate and canonicalize a configuration type. - # Supply the specified configuration type as an argument. - # If it is invalid, we print an error message on stderr and exit with code 1. - # Otherwise, we print the canonical config type on stdout and succeed. - -+# You can get the latest version of this script from: -+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD -+ - # This file is supposed to be the same for all GNU packages - # and recognize all the CPU types, system types and aliases - # that are meaningful with *any* GNU software. -@@ -70,7 +73,8 @@ - version="\ - GNU config.sub ($timestamp) - --Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 - Free Software Foundation, Inc. - - This is free software; see the source for copying conditions. There is NO -@@ -83,11 +87,11 @@ - while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) -- echo "$timestamp" ; exit 0 ;; -+ echo "$timestamp" ; exit ;; - --version | -v ) -- echo "$version" ; exit 0 ;; -+ echo "$version" ; exit ;; - --help | --h* | -h ) -- echo "$usage"; exit 0 ;; -+ echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. -@@ -99,7 +103,7 @@ - *local*) - # First pass through any local machine types. - echo $1 -- exit 0;; -+ exit ;; - - * ) - break ;; -@@ -118,10 +122,18 @@ - # Here we must recognize all the valid KERNEL-OS combinations. - maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` - case $maybe_os in -- nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) -+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ -+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ -+ knetbsd*-gnu* | netbsd*-gnu* | \ -+ kopensolaris*-gnu* | \ -+ storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; -+ android-linux) -+ os=-linux-android -+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown -+ ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] -@@ -144,10 +156,13 @@ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -- -apple | -axis) -+ -apple | -axis | -knuth | -cray | -microblaze*) - os= - basic_machine=$1 - ;; -+ -bluegene*) -+ os=-cnk -+ ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 -@@ -162,13 +177,17 @@ - os=-chorusos - basic_machine=$1 - ;; -- -chorusrdb) -- os=-chorusrdb -+ -chorusrdb) -+ os=-chorusrdb - basic_machine=$1 -- ;; -+ ;; - -hiux*) - os=-hiuxwe2 - ;; -+ -sco6) -+ os=-sco5v6 -+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` -+ ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` -@@ -185,6 +204,10 @@ - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; -+ -sco5v6*) -+ # Don't forget version if it is 3.2v4 or newer. -+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` -+ ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` -@@ -202,6 +225,12 @@ - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; -+ -lynx*178) -+ os=-lynxos178 -+ ;; -+ -lynx*5) -+ os=-lynxos5 -+ ;; - -lynx*) - os=-lynxos - ;; -@@ -226,55 +255,103 @@ - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ -+ | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ -- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ -+ | am33_2.0 \ -+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ -+ | be32 | be64 \ -+ | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ -- | fr30 | frv \ -+ | epiphany \ -+ | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ -+ | hexagon \ - | i370 | i860 | i960 | ia64 \ -- | ip2k \ -- | m32r | m68000 | m68k | m88k | mcore \ -+ | ip2k | iq2000 \ -+ | le32 | le64 \ -+ | lm32 \ -+ | m32c | m32r | m32rle | m68000 | m68k | m88k \ -+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ -- | mips64vr | mips64vrel \ -+ | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ -+ | mips64r5900 | mips64r5900el \ -+ | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ -+ | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ -+ | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ -+ | moxie \ -+ | mt \ - | msp430 \ -+ | nds32 | nds32le | nds32be \ -+ | nios | nios2 \ - | ns16k | ns32k \ -- | openrisc | or32 \ -+ | open8 \ -+ | or32 \ - | pdp10 | pdp11 | pj | pjl \ -- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ -+ | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pyramid \ -- | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ -+ | rl78 | rx \ -+ | score \ -+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ -- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ -- | strongarm \ -- | tahoe | thumb | tic4x | tic80 | tron \ -- | v850 | v850e \ -+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ -+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ -+ | spu \ -+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ -+ | ubicom32 \ -+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | we32k \ -- | x86 | xscale | xstormy16 | xtensa \ -- | z8k) -+ | x86 | xc16x | xstormy16 | xtensa \ -+ | z8k | z80) - basic_machine=$basic_machine-unknown - ;; -- m6811 | m68hc11 | m6812 | m68hc12) -- # Motorola 68HC11/12. -+ c54x) -+ basic_machine=tic54x-unknown -+ ;; -+ c55x) -+ basic_machine=tic55x-unknown -+ ;; -+ c6x) -+ basic_machine=tic6x-unknown -+ ;; -+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; -+ ms1) -+ basic_machine=mt-unknown -+ ;; -+ -+ strongarm | thumb | xscale) -+ basic_machine=arm-unknown -+ ;; -+ xgate) -+ basic_machine=$basic_machine-unknown -+ os=-none -+ ;; -+ xscaleeb) -+ basic_machine=armeb-unknown -+ ;; -+ -+ xscaleel) -+ basic_machine=armel-unknown -+ ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and -@@ -290,58 +367,81 @@ - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ -+ | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ -- | alphapca5[67]-* | alpha64pca5[67]-* | amd64-* | arc-* \ -+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ -- | avr-* \ -- | bs2000-* \ -- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ -- | clipper-* | cydra-* \ -+ | avr-* | avr32-* \ -+ | be32-* | be64-* \ -+ | bfin-* | bs2000-* \ -+ | c[123]* | c30-* | [cjt]90-* | c4x-* \ -+ | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ -- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ -+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ -+ | hexagon-* \ - | i*86-* | i860-* | i960-* | ia64-* \ -- | ip2k-* \ -- | m32r-* \ -+ | ip2k-* | iq2000-* \ -+ | le32-* | le64-* \ -+ | lm32-* \ -+ | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ -- | m88110-* | m88k-* | mcore-* \ -+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ -+ | microblaze-* | microblazeel-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ -- | mips64vr-* | mips64vrel-* \ -+ | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ -+ | mips64r5900-* | mips64r5900el-* \ -+ | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ -+ | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ -+ | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ -+ | mmix-* \ -+ | mt-* \ - | msp430-* \ -- | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ -+ | nds32-* | nds32le-* | nds32be-* \ -+ | nios-* | nios2-* \ -+ | none-* | np1-* | ns16k-* | ns32k-* \ -+ | open8-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ -- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ -+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pyramid-* \ -- | romp-* | rs6000-* \ -- | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ -+ | rl78-* | romp-* | rs6000-* | rx-* \ -+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ -- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ -- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ -- | tahoe-* | thumb-* \ -+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ -+ | sparclite-* \ -+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ -+ | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ -+ | tile*-* \ - | tron-* \ -- | v850-* | v850e-* | vax-* \ -+ | ubicom32-* \ -+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ -+ | vax-* \ - | we32k-* \ -- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ -- | xtensa-* \ -+ | x86-* | x86_64-* | xc16x-* | xps100-* \ -+ | xstormy16-* | xtensa*-* \ - | ymp-* \ -- | z8k-*) -+ | z8k-* | z80-*) -+ ;; -+ # Recognize the basic CPU types without company name, with glob match. -+ xtensa*) -+ basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. -@@ -359,6 +459,9 @@ - basic_machine=a29k-amd - os=-udi - ;; -+ abacus) -+ basic_machine=abacus-unknown -+ ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout -@@ -376,6 +479,9 @@ - amd64) - basic_machine=x86_64-pc - ;; -+ amd64-*) -+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ;; - amdahl) - basic_machine=580-amdahl - os=-sysv -@@ -399,6 +505,10 @@ - basic_machine=m68k-apollo - os=-bsd - ;; -+ aros) -+ basic_machine=i386-pc -+ os=-aros -+ ;; - aux) - basic_machine=m68k-apple - os=-aux -@@ -407,10 +517,35 @@ - basic_machine=ns32k-sequent - os=-dynix - ;; -+ blackfin) -+ basic_machine=bfin-unknown -+ os=-linux -+ ;; -+ blackfin-*) -+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` -+ os=-linux -+ ;; -+ bluegene*) -+ basic_machine=powerpc-ibm -+ os=-cnk -+ ;; -+ c54x-*) -+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ;; -+ c55x-*) -+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ;; -+ c6x-*) -+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; -+ cegcc) -+ basic_machine=arm-unknown -+ os=-cegcc -+ ;; - convex-c1) - basic_machine=c1-convex - os=-bsd -@@ -435,12 +570,27 @@ - basic_machine=j90-cray - os=-unicos - ;; -+ craynv) -+ basic_machine=craynv-cray -+ os=-unicosmp -+ ;; -+ cr16 | cr16-*) -+ basic_machine=cr16-unknown -+ os=-elf -+ ;; - crds | unos) - basic_machine=m68k-crds - ;; -+ crisv32 | crisv32-* | etraxfs*) -+ basic_machine=crisv32-axis -+ ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; -+ crx) -+ basic_machine=crx-unknown -+ os=-elf -+ ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; -@@ -463,6 +613,14 @@ - basic_machine=m88k-motorola - os=-sysv3 - ;; -+ dicos) -+ basic_machine=i686-pc -+ os=-dicos -+ ;; -+ djgpp) -+ basic_machine=i586-pc -+ os=-msdosdjgpp -+ ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx -@@ -574,7 +732,6 @@ - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; --# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 -@@ -613,6 +770,14 @@ - basic_machine=m68k-isi - os=-sysv - ;; -+ m68knommu) -+ basic_machine=m68k-unknown -+ os=-linux -+ ;; -+ m68knommu-*) -+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` -+ os=-linux -+ ;; - m88k-omron*) - basic_machine=m88k-omron - ;; -@@ -624,10 +789,21 @@ - basic_machine=ns32k-utek - os=-sysv - ;; -+ microblaze*) -+ basic_machine=microblaze-xilinx -+ ;; -+ mingw64) -+ basic_machine=x86_64-pc -+ os=-mingw64 -+ ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; -+ mingw32ce) -+ basic_machine=arm-unknown -+ os=-mingw32ce -+ ;; - miniframe) - basic_machine=m68000-convergent - ;; -@@ -641,10 +817,6 @@ - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; -- mmix*) -- basic_machine=mmix-knuth -- os=-mmixware -- ;; - monitor) - basic_machine=m68k-rom68k - os=-coff -@@ -657,10 +829,21 @@ - basic_machine=i386-pc - os=-msdos - ;; -+ ms1-*) -+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` -+ ;; -+ msys) -+ basic_machine=i386-pc -+ os=-msys -+ ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; -+ nacl) -+ basic_machine=le32-unknown -+ os=-nacl -+ ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 -@@ -725,9 +908,11 @@ - np1) - basic_machine=np1-gould - ;; -- nv1) -- basic_machine=nv1-cray -- os=-unicosmp -+ neo-tandem) -+ basic_machine=neo-tandem -+ ;; -+ nse-tandem) -+ basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem -@@ -736,9 +921,12 @@ - basic_machine=hppa1.1-oki - os=-proelf - ;; -- or32 | or32-*) -+ openrisc | openrisc-*) - basic_machine=or32-unknown -- os=-coff -+ ;; -+ os400) -+ basic_machine=powerpc-ibm -+ os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson -@@ -756,6 +944,14 @@ - basic_machine=i860-intel - os=-osf - ;; -+ parisc) -+ basic_machine=hppa-unknown -+ os=-linux -+ ;; -+ parisc-*) -+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` -+ os=-linux -+ ;; - pbd) - basic_machine=sparc-tti - ;; -@@ -765,6 +961,12 @@ - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; -+ pc98) -+ basic_machine=i386-pc -+ ;; -+ pc98-*) -+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; -@@ -794,9 +996,10 @@ - ;; - power) basic_machine=power-ibm - ;; -- ppc) basic_machine=powerpc-unknown -+ ppc | ppcbe) basic_machine=powerpc-unknown - ;; -- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ppc-* | ppcbe-*) -+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown -@@ -821,6 +1024,10 @@ - basic_machine=i586-unknown - os=-pw32 - ;; -+ rdos) -+ basic_machine=i386-pc -+ os=-rdos -+ ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff -@@ -847,6 +1054,10 @@ - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; -+ sde) -+ basic_machine=mipsisa32-sde -+ os=-elf -+ ;; - sei) - basic_machine=mips-sei - os=-seiux -@@ -858,6 +1069,9 @@ - basic_machine=sh-hitachi - os=-hms - ;; -+ sh5el) -+ basic_machine=sh5le-unknown -+ ;; - sh64) - basic_machine=sh64-unknown - ;; -@@ -879,6 +1093,9 @@ - basic_machine=i860-stratus - os=-sysv4 - ;; -+ strongarm-* | thumb-*) -+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` -+ ;; - sun2) - basic_machine=m68000-sun - ;; -@@ -935,17 +1152,9 @@ - basic_machine=t90-cray - os=-unicos - ;; -- tic54x | c54x*) -- basic_machine=tic54x-unknown -- os=-coff -- ;; -- tic55x | c55x*) -- basic_machine=tic55x-unknown -- os=-coff -- ;; -- tic6x | c6x*) -- basic_machine=tic6x-unknown -- os=-coff -+ tile*) -+ basic_machine=$basic_machine-unknown -+ os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown -@@ -960,6 +1169,10 @@ - tower | tower-32) - basic_machine=m68k-ncr - ;; -+ tpf) -+ basic_machine=s390x-ibm -+ os=-tpf -+ ;; - udi29k) - basic_machine=a29k-amd - os=-udi -@@ -1003,9 +1216,16 @@ - basic_machine=hppa1.1-winbond - os=-proelf - ;; -+ xbox) -+ basic_machine=i686-pc -+ os=-mingw32 -+ ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; -+ xscale-* | xscalee[bl]-*) -+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` -+ ;; - ymp) - basic_machine=ymp-cray - os=-unicos -@@ -1014,6 +1234,10 @@ - basic_machine=z8k-unknown - os=-sim - ;; -+ z80-*-coff) -+ basic_machine=z80-unknown -+ os=-sim -+ ;; - none) - basic_machine=none-none - os=-none -@@ -1033,6 +1257,9 @@ - romp) - basic_machine=romp-ibm - ;; -+ mmix) -+ basic_machine=mmix-knuth -+ ;; - rs6000) - basic_machine=rs6000-ibm - ;; -@@ -1049,13 +1276,10 @@ - we32k) - basic_machine=we32k-att - ;; -- sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) -+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; -- sh64) -- basic_machine=sh64-unknown -- ;; -- sparc | sparcv9 | sparcv9b) -+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) -@@ -1099,9 +1323,12 @@ - if [ x"$os" != x"" ] - then - case $os in -- # First match some system type aliases -- # that might get confused with valid system types. -+ # First match some system type aliases -+ # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. -+ -auroraux) -+ os=-auroraux -+ ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; -@@ -1122,25 +1349,31 @@ - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ -- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ -- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ -+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ -+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ -+ | -sym* | -kopensolaris* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ -- | -aos* \ -+ | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ -- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \ -- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ -+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ -+ | -bitrig* | -openbsd* | -solidbsd* \ -+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ -+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ -- | -chorusos* | -chorusrdb* \ -- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ -- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ -+ | -chorusos* | -chorusrdb* | -cegcc* \ -+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ -+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ -+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ -+ | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ -- | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) -+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ -+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) -@@ -1158,12 +1391,15 @@ - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ -- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ -+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; -+ -linux-dietlibc) -+ os=-linux-dietlibc -+ ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; -@@ -1176,6 +1412,9 @@ - -opened*) - os=-openedition - ;; -+ -os400*) -+ os=-os400 -+ ;; - -wince*) - os=-wince - ;; -@@ -1197,6 +1436,9 @@ - -atheos*) - os=-atheos - ;; -+ -syllable*) -+ os=-syllable -+ ;; - -386bsd) - os=-bsd - ;; -@@ -1219,6 +1461,9 @@ - -sinix*) - os=-sysv4 - ;; -+ -tpf*) -+ os=-tpf -+ ;; - -triton*) - os=-sysv3 - ;; -@@ -1255,6 +1500,14 @@ - -kaos*) - os=-kaos - ;; -+ -zvmoe) -+ os=-zvmoe -+ ;; -+ -dicos*) -+ os=-dicos -+ ;; -+ -nacl*) -+ ;; - -none) - ;; - *) -@@ -1277,6 +1530,12 @@ - # system, and we'll never get to this point. - - case $basic_machine in -+ score-*) -+ os=-elf -+ ;; -+ spu-*) -+ os=-elf -+ ;; - *-acorn) - os=-riscix1.2 - ;; -@@ -1286,9 +1545,21 @@ - arm*-semi) - os=-aout - ;; -- c4x-* | tic4x-*) -- os=-coff -- ;; -+ c4x-* | tic4x-*) -+ os=-coff -+ ;; -+ hexagon-*) -+ os=-elf -+ ;; -+ tic54x-*) -+ os=-coff -+ ;; -+ tic55x-*) -+ os=-coff -+ ;; -+ tic6x-*) -+ os=-coff -+ ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 -@@ -1307,13 +1578,13 @@ - ;; - m68000-sun) - os=-sunos3 -- # This also exists in the configure program, but was not the -- # default. -- # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; -+ mep-*) -+ os=-elf -+ ;; - mips*-cisco) - os=-elf - ;; -@@ -1332,9 +1603,15 @@ - *-be) - os=-beos - ;; -+ *-haiku) -+ os=-haiku -+ ;; - *-ibm) - os=-aix - ;; -+ *-knuth) -+ os=-mmixware -+ ;; - *-wec) - os=-proelf - ;; -@@ -1437,7 +1714,7 @@ - -sunos*) - vendor=sun - ;; -- -aix*) -+ -cnk*|-aix*) - vendor=ibm - ;; - -beos*) -@@ -1467,9 +1744,15 @@ - -mvs* | -opened*) - vendor=ibm - ;; -+ -os400*) -+ vendor=ibm -+ ;; - -ptx*) - vendor=sequent - ;; -+ -tpf*) -+ vendor=ibm -+ ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; -@@ -1494,7 +1777,7 @@ - esac - - echo $basic_machine$os --exit 0 -+exit - - # Local variables: - # eval: (add-hook 'write-file-hooks 'time-stamp)