%global USE_FIPSCHECK true %global USE_LIBCAP_NG 0 %global USE_LABELED_IPSEC true %global USE_CRL_FETCHING true %global USE_DNSSEC true %global USE_NM true %global USE_LINUX_AUDIT true %global _hardened_build 1 %global fipscheck_version 1.3.0 %global buildefence 0 %global development 0 %global cavstests 1 #global prever rc1 Name: libreswan Summary: IPsec implementation with IKEv1 and IKEv2 keying protocols Version: 3.17 Release: %{?prever:0.}2%{?prever:.%{prever}}%{?dist} License: GPLv2 Url: https://libreswan.org/ Source0: https://download.libreswan.org/%{?prever:development/}%{name}-%{version}%{?prever}.tar.gz %if %{cavstests} Source1: https://download.libreswan.org/cavs/ikev1_dsa.fax.bz2 Source2: https://download.libreswan.org/cavs/ikev1_psk.fax.bz2 Source3: https://download.libreswan.org/cavs/ikev2.fax.bz2 %endif Group: System Environment/Daemons BuildRequires: bison flex pkgconfig BuildRequires: systemd systemd-units Requires(post): coreutils bash systemd Requires(preun): systemd Requires(postun): systemd Conflicts: openswan < %{version}-%{release} Obsoletes: openswan < %{version}-%{release} Provides: openswan = %{version}-%{release} Provides: openswan-doc = %{version}-%{release} BuildRequires: pkgconfig hostname BuildRequires: nss-devel >= 3.16.1, nspr-devel BuildRequires: pam-devel BuildRequires: libevent-devel %if %{USE_DNSSEC} BuildRequires: unbound-devel %endif %if %{USE_FIPSCHECK} BuildRequires: fipscheck-devel >= %{fipscheck_version} Requires: fipscheck%{_isa} >= %{fipscheck_version} %endif %if %{USE_LINUX_AUDIT} Buildrequires: audit-libs-devel %endif %if %{USE_LIBCAP_NG} BuildRequires: libcap-ng-devel %endif %if %{USE_CRL_FETCHING} BuildRequires: openldap-devel curl-devel %endif %if %{buildefence} BuildRequires: ElectricFence %endif BuildRequires: xmlto Requires: nss-tools, nss-softokn Requires: iproute >= 2.6.8 %description Libreswan is a free implementation of IPsec & IKE for Linux. IPsec is the Internet Protocol Security and uses strong cryptography to provide both authentication and encryption services. These services allow you to build secure tunnels through untrusted networks. Everything passing through the untrusted net is encrypted by the ipsec gateway machine and decrypted by the gateway at the other end of the tunnel. The resulting tunnel is a virtual private network or VPN. This package contains the daemons and userland tools for setting up Libreswan. To build KLIPS, see the kmod-libreswan.spec file. Libreswan also supports IKEv2 (RFC4309) and Secure Labeling Libreswan is based on Openswan-2.6.38 which in turn is based on FreeS/WAN-2.04 %prep %setup -q -n libreswan-%{version}%{?prever} sed -i "s:/usr/bin/python:/usr/bin/python3:" programs/verify/verify.in %build %if %{buildefence} %global efence "-lefence" %endif #796683: -fno-strict-aliasing make %{?_smp_mflags} \ %if %{development} USERCOMPILE="-g -DGCC_LINT %(echo %{optflags} | sed -e s/-O[0-9]*/ /) %{?efence} -fPIE -pie -fno-strict-aliasing -Wformat-nonliteral -Wformat-security" \ %else USERCOMPILE="-g -DGCC_LINT %{optflags} %{?efence} -fPIE -pie -fno-strict-aliasing -Wformat-nonliteral -Wformat-security" \ %endif USERLINK="-g -pie -Wl,-z,relro,-z,now %{?efence}" \ INITSYSTEM=systemd \ USE_NM=%{USE_NM} \ USE_XAUTHPAM=true \ %if %{USE_FIPSCHECK} USE_FIPSCHECK="%{USE_FIPSCHECK}" \ FIPSPRODUCTCHECK=%{_sysconfdir}/system-fips \ %endif USE_LIBCAP_NG="%{USE_LIBCAP_NG}" \ USE_LABELED_IPSEC="%{USE_LABELED_IPSEC}" \ %if %{USE_CRL_FETCHING} USE_LDAP=true \ USE_LIBCURL=true \ %endif USE_DNSSEC="%{USE_DNSSEC}" \ INC_USRLOCAL=%{_prefix} \ FINALLIBEXECDIR=%{_libexecdir}/ipsec \ MANTREE=%{_mandir} \ INC_RCDEFAULT=%{_initrddir} \ WERROR_CFLAGS="" \ programs FS=$(pwd) %if %{USE_FIPSCHECK} # Add generation of HMAC checksums of the final stripped binaries %define __spec_install_post \ %{?__debug_package:%{__debug_install_post}} \ %{__arch_install_post} \ %{__os_install_post} \ fipshmac -d %{buildroot}%{_libdir}/fipscheck %{buildroot}%{_libexecdir}/ipsec/* \ fipshmac -d %{buildroot}%{_libdir}/fipscheck %{buildroot}%{_sbindir}/ipsec \ %{nil} %endif %install make \ DESTDIR=%{buildroot} \ INC_USRLOCAL=%{_prefix} \ FINALLIBEXECDIR=%{_libexecdir}/ipsec \ MANTREE=%{buildroot}%{_mandir} \ INC_RCDEFAULT=%{_initrddir} \ INSTMANFLAGS="-m 644" \ INITSYSTEM=systemd \ install FS=$(pwd) rm -rf %{buildroot}/usr/share/doc/libreswan install -d -m 0700 %{buildroot}%{_localstatedir}/run/pluto # used when setting --perpeerlog without --perpeerlogbase install -d -m 0700 %{buildroot}%{_localstatedir}/log/pluto/peer install -d %{buildroot}%{_sbindir} install -d %{buildroot}%{_sysconfdir}/sysctl.d install -m 0644 packaging/fedora/libreswan-sysctl.conf \ %{buildroot}%{_sysconfdir}/sysctl.d/50-libreswan.conf install -d %{buildroot}%{_tmpfilesdir} install -m 0644 packaging/fedora/libreswan-tmpfiles.conf \ %{buildroot}%{_tmpfilesdir}/libreswan.conf %if %{USE_FIPSCHECK} mkdir -p %{buildroot}%{_libdir}/fipscheck %endif echo "include %{_sysconfdir}/ipsec.d/*.secrets" > %{buildroot}%{_sysconfdir}/ipsec.secrets rm -fr %{buildroot}%{_sysconfdir}/rc.d/rc* %if %{cavstests} %check # There is an elaborate upstream testing infrastructure which we do not # run here - it takes hours and uses kvm # We only run the CAVS tests. cp %{SOURCE1} %{SOURCE2} %{SOURCE3} . bunzip2 *.fax.bz2 : starting CAVS test for IKEv2 OBJ.linux.*/programs/pluto/cavp -v2 ikev2.fax | \ diff -u ikev2.fax - > /dev/null : starting CAVS test for IKEv1 RSASIG OBJ.linux.*/programs/pluto/cavp -v1sig ikev1_dsa.fax | \ diff -u ikev1_dsa.fax - > /dev/null : starting CAVS test for IKEv1 PSK OBJ.linux.*/programs/pluto/cavp -v1psk ikev1_psk.fax | \ diff -u ikev1_psk.fax - > /dev/null : CAVS tests passed %endif %post %systemd_post ipsec.service %preun %systemd_preun ipsec.service %postun %systemd_postun_with_restart ipsec.service %files %doc CHANGES COPYING CREDITS README* LICENSE %doc docs/*.* docs/examples %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipsec.conf %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/sysconfig/pluto %attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ipsec.secrets %attr(0700,root,root) %dir %{_sysconfdir}/ipsec.d %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipsec.d/v6neighbor-hole.conf %attr(0700,root,root) %dir %{_sysconfdir}/ipsec.d/policies %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ipsec.d/policies/* %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/sysctl.d/50-libreswan.conf %attr(0700,root,root) %dir %{_localstatedir}/log/pluto %attr(0700,root,root) %dir %{_localstatedir}/log/pluto/peer %attr(0700,root,root) %dir %{_localstatedir}/run/pluto %attr(0644,root,root) %{_tmpfilesdir}/libreswan.conf %attr(0644,root,root) %{_unitdir}/ipsec.service %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/pam.d/pluto %{_sbindir}/ipsec %{_libexecdir}/ipsec %attr(0644,root,root) %doc %{_mandir}/*/* %if %{USE_FIPSCHECK} %{_libdir}/fipscheck/*.hmac %endif %changelog * Thu May 05 2016 Paul Wouters - 3.17-2 - Resolves: rhbz#1324956 prelink is gone, /etc/prelink.conf.d/* is no longer used * Thu Apr 07 2016 Paul Wouters - 3.17-1 - Updated to 3.17 for CVE-2016-3071 - Disable LIBCAP_NG as it prevents unbound-control from working properly - Temporarilly disable WERROR due to a few minor known issues * Thu Feb 04 2016 Fedora Release Engineering - 3.16-1.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Fri Dec 18 2015 Paul Wouters - 3.16-1 - Updated to 3.16 (see https://download.libreswan.org/CHANGES) * Tue Aug 11 2015 Paul Wouters - 3.15-1 - Updated to 3.15 (see http://download.libreswan.org/CHANGES) - Resolves: rhbz#CVE-2015-3240 IKE daemon restart when receiving a bad DH gx - NSS database creation moved from spec file to service file - Run CAVS tests on package build - Added BuildRequire systemd-units and xmlto - Bumped minimum required nss to 3.16.1 - Install tmpfiles - Install sysctl file - Update doc files to include * Mon Jul 13 2015 Paul Wouters - 3.13-2 - Resolves: rhbz#1238967 Switch libreswan to use python3 * Wed Jun 17 2015 Fedora Release Engineering - 3.13-1.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Mon Jun 01 2015 Paul Wouters - 3.13-1 - Updated to 3.13 for CVE-2015-3204 * Fri Nov 07 2014 Paul Wouters - 3.12-1 - Updated to 3.12 Various IKEv2 fixes * Wed Oct 22 2014 Paul Wouters - 3.11-1 - Updated to 3.11 (many fixes, including startup fixes) - Resolves: rhbz#1144941 libreswan 3.10 upgrade breaks old ipsec.secrets configs - Resolves: rhbz#1147072 ikev1 aggr mode connection fails after libreswan upgrade - Resolves: rhbz#1144831 Libreswan appears to start with systemd before all the NICs are up and running * Tue Sep 09 2014 Paul Wouters - 3.10-3 - Fix some coverity issues, auto=route on bootup and snprintf on 32bit machines * Mon Sep 01 2014 Paul Wouters - 3.10-1 - Updated to 3.10, major bugfix release, new xauth status options * Sun Aug 17 2014 Fedora Release Engineering - 3.9-1.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Thu Jul 10 2014 Paul Wouters - 3.9-1 - Updated to 3.9. IKEv2 enhancements, ESP/IKE algo enhancements - Mark libreswan-fips.conf as config file - attr modifier for man pages no longer needed - BUGS file no longer exists upstream * Sat Jun 07 2014 Fedora Release Engineering - 3.8-1.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Sat Jan 18 2014 Paul Wouters - 3.8-1 - Updated to 3.8, fixes rhbz#CVE-2013-6467 (rhbz#1054102) * Wed Dec 11 2013 Paul Wouters - 3.7-1 - Updated to 3.7, fixes CVE-2013-4564 - Fixes creating a bogus NSS db on startup (rhbz#1005410) * Thu Oct 31 2013 Paul Wouters - 3.6-1 - Updated to 3.6 (IKEv2, MODECFG, Cisco interop fixes) - Generate empty NSS db if none exists * Mon Aug 19 2013 Paul Wouters - 3.5-3 - Add a Provides: for openswan-doc * Sat Aug 03 2013 Fedora Release Engineering - 3.5-1.1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Mon Jul 15 2013 Paul Wouters - 3.5-2 - Added interop patch for (some?) Cisco VPN clients sending 16 zero bytes of extraneous IKE data - Removed fipscheck_version * Sat Jul 13 2013 Paul Wouters - 3.5-1 - Updated to 3.5 * Thu Jun 06 2013 Paul Wouters - 3.4-1 - Updated to 3.4, which only contains style changes to kernel coding style - IN MEMORIAM: June 3rd, 2013 Hugh Daniel * Mon May 13 2013 Paul Wouters - 3.3-1 - Updated to 3.3, which resolves CVE-2013-2052 * Sat Apr 13 2013 Paul Wouters - 3.2-1 - Initial package for Fedora